We conducted a field experiment to determine whether application of biosolids (municipal sewage sludge) to degraded areas of the Brazilian Atlantic rainforest had the potential to contaminate native forest species with trace metals in the sandy soils of the region. Treatments consisted of 0, 2.5, 5, 10, 15, and 20 dry Mg biosolids ha⁻¹, with nine native pioneer, secondary, and climax tree species assessed for metal uptake: capixingui, aroeira-pimenteria, canafístula, cedro-rosa, mutamba, angico-vermelho, copaíba, jatobá, and jequitibá. Biosolid application did not have a statistically significant effect on metal concentrations in soil, and Cd was the only metal with increased availability. No increased metal uptake was seen in tree foliage sampled at 6 and 12 months after application. Additional longer-term study is recommended; however, the results of this study indicate biosolids could be used in Atlantic rainforest reclamation in degraded sandy soils with little impact on soil accumulation and tree uptake of trace metals.

Chemical cross-linking and the high molecular weight of superabsorbent copolymers (SAPs) are the two main causes of their resistance to biodegradation. However, SAP particles are colonized by microorganisms. For the purposes of this study, the dry technical copolymer of acrylamide and potassium acrylate containing 5.28 % of unpolymerized monomers was wrapped in a geotextile and incubated in unsterile Haplic Luvisol soil as a water absorbing geocomposite. The highest number of soil bacteria that colonized the hydrated SAP and utilized it as the sole carbon and energy source was found after the first month of incubation in soil. It was equal to 7.21–7.49 log₁₀ cfu g⁻¹ of water absorbed by the SAP and decreased by 1.35–1.61 log₁₀ units within the next 8 months. During this time, the initial SAP water holding capacity of 1665.8 g has decreased by 24.40 %. Moreover, the 5 g of SAP dry mass has declined by 31.70 %. Two bacteria, Rhizobium radiobacter 28SG and Bacillus aryabhattai 31SG isolated from the watered SAP were found to be able to biodegrade this SAP in pure cultures. They destroyed 25.07 and 41.85 mg of 300 mg of the technical SAP during the 60-day growth in mineral Burk’s salt medium, and biodegradation activity was equal to 2.95 and 6.72 μg of SAP μg⁻¹ of protein, respectively. B. aryabhattai 31SG and R. radiobacter 28SG were also able to degrade 9.99 and 29.70 mg of 82 mg of the ultra-pure SAP in synthetic root exudate medium during the 30-day growth, respectively.

The study was developed at the Municipality of São Gabriel do Oeste, State of Mato Grosso do Sul, Brazil, where were performed analyses of water samples, including physical and chemical aspects, obtained through Hanna multi-parameter probe into four different parts of the study area. Landsat satellite 8 (L8) and unmanned aerial vehicle (UAV) was also used to generate vegetation indices, using the visible spectral range for both types of images and normalized difference vegetation index (NDVI) just for L8. Later, these ratios were correlated to chlorophyll a that has a key role in photosynthesis. Regarding the physical and chemical parameters, the collection point 2 was the most differed to the others; this may have happened to be a dam with little flow in an eutrophication process. Through the water absorbance curve in the visible wavelengths, it is possible to estimate comparatively water body that has larger amounts of dissolved materials in the water. There was a high correlation between vegetation indices generated from aerial photographs and L8 image, with chlorophyll a extracted from water in the laboratory. In this sense, they are likely to use to forecast future scenarios. It is suggested the use of aerial photographs of UAVs for monitoring the environmental quality of small water bodies, considering its high spatial and temporal resolution.

Adsorption of arsenic (III, V) from aqueous solution onto the synthesized α-Fe₂O₃/MCM-41 nanocomposite adsorbent, as function of contact time, initial concentration of the solution, temperature, pH, and presence of other anionic species, has been investigated. Characterization of adsorbent was performed via XRD, FT-IR, TGA, TEM, and N₂ adsorption–desorption techniques. The synthesized adsorbent belonged to the group of mesoporous materials with the mean pore diameter of 2.37 nm, specific surface area of 507.5 m² g⁻¹, and total pore volume of 0.571 cm³ g⁻¹. The experimental data were analyzed by Langmuir, Freundlich, and Dubinin-Radushkevich (D–R) adsorption isotherms. Based on Langmuir isotherm, the maximum adsorption capacities at 298 K in the concentration range of 2–200 ppm were 133.3 and 102.1 mg g⁻¹ for As(ш) and As(v), respectively. The adsorption experiments at different contact times indicated that the kinetics of adsorption accurately followed the pseudo-second-order rate equation. Thermodynamics parameters were calculated, and it was found that the adsorption process was spontaneous, exothermic, and favored at lower temperatures. The capability of regeneration and reusability of adsorbent was also examined in alkaline solutions.

The aim of this study was to investigate the removal and recovery of hexavalent chromium (Cr(VI)) from industrial plating wastewater using anion exchanger Kanecaron SA fibers in batch systems. The surface morphology and physicochemical properties of the fiber were analyzed by scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDAX), and Fourier transform infrared spectroscopy (FT-IR). The removal efficiency was affected by the solution pH and showed a plateau formation decreasing on both sides of pH 4. The Cr(VI) uptake on Kanecaron SA fibers was rapidly increased in the first 10 min, and the kinetic data fit well to the Elovich model. Isotherm model analysis demonstrates that the Redlich-Peterson model suitably describes the equilibrium data, and the maximum adsorption capacity (Q ₘ) from the Langmuir model was 87.366 mg/g for Cr(VI) in distilled water, 117.977 mg/g for total Cr, and 57.101 mg/g for Cr(VI) in wastewater. Additionally, the Cr(III) contained in the plating wastewater was removed by the Kanecaron SA fibers, while the other heavy metals were not removed. Thermodynamic analysis indicates that Cr(VI) adsorption to Kanecaron SA fibers decreased with increasing temperature from 10 to 50 °C, indicating the spontaneous and exothermic nature of the sorption process. The removal efficiency was maintained above 80 % during four regeneration cycles.

The effect of direct current (DC) on phenol biodegradation under aerobic/anaerobic condition was investigated in this study using a bioelectrochemical reactor. It was found that phenol biodegradation was inhibited with current ranged from 10 to 40 mA. The growth of biomass was reduced to 43.2 ± 6.6 % for aerobic sludge and 38.6 ± 7.3 % for anaerobic sludge, but the loosely bound extracellular polymer substances (LB–EPS) were increased 91.2 ± 1.3 % for aerobic sludge and 62.8 ± 0.8 % for anaerobic sludge as the current increased from 10 to 40 mA. Adenosine triphosphate (ATP) content of aerobic sludge was also reduced 0.481 ± 0.04-fold and 0.512 ± 0.05-fold lower and 1.34 ± 0.13-fold higher than that of the control when the current was increased from 10 to 40 mA. The results of phosphate buffer saline adding treatment indicated that lower pH caused by a DC above 10 mA was responsible for the reduced phenol biodegradation, leading to the reduction of biomass. However, lower intensity of current (5 mA) had no significant impact on phenol degradation rate, pH, LB–EPS, ATP content, and cell growth of aerobic/anaerobic sludge. These results give us a more detailed understanding of the effects of electricity on the treatment of phenol containing wastewater.

Escherichia coli (E. coli) contamination of groundwater (GW) and surface water (SW) occurs significantly through the subsurface from onsite wastewater treatment systems (OWTSs). However, E. coli transport in the subsurface remains inadequately characterized at the field scale, especially within the vadose zone. Therefore, the aim of this research is to investigate the impact of groundwater fluctuations (e.g., recharging, discharging conditions) and variable conditions in the vadose zone (e.g., pulses of E. coli flux) by characterizing E. coli fate and transport in a linked surface water-soil water-groundwater system (SW-SoW-GW). In particular, this study characterizes the impact of flow regimes on E. coli transport in the subsurface and evaluates the sensitivity of parameters that control the transport of E. coli in the SW-SoW-GW system. This study was conducted in Lake Granbury, which is an important water supply in north-central Texas providing water for over 250,000 people. Results showed that there was less removal of E. coli during groundwater recharge events as compared to GW discharge events. Also, groundwater and surface water systems largely control E. coli transport in the subsurface; however, temporal variability of E. coli can be explained by linking the SW-SoW-GW system. Moreover, sensitivity analysis revealed that saturated water content of the soil, total retention rate coefficient, and hydraulic conductivity are important parameters for E. coli transport in the subsurface.

A greenhouse experiment was accomplished to investigate the feasibility of excess sludge modified by coal fly ash pretreatment and γ-ray irradiation in soil application for cultivation of Artemisia ordosica. The results showed that modified excess sludge provided a positive effect on the growth of Artemisia ordosica. The modified excess sludge and aeolian sandy soil at the volume ratio of 1:2 was optimal, and nutrient concentrations of Artemisia ordosica reached the highest. In the aeolian sandy soil, the bio-concentration factor values of most heavy metals were less than 1.0 except for Cu, Zn, and Ni. The average bio-concentration factor values of heavy metals in Artemisia ordosica increased in a sequence of Mo < Cd < Fe < V < Cr < Co < Mn < Pb < Cu < Zn < Ni for all samples. Artemisia ordosica could be used to decrease the bioavailability and eco-toxicity of Ni, V, and Mo in all cultivation experiments of artificial soil, and Artemisia ordosica could also reduce the bioavailability and eco-toxicity of Cu, Cd, Cr, and Mn in the artificial soil of modified excess sludge and aeolian sandy soil at the volume ratio of 1:2.

In the present study, response surface methodology (RSM) was applied to maximize As(V) removal from aqueous solutions by using modified magnetic nanoparticles with ascorbic acid (AA-MNPs). The structural features of the produced material were characterized by means of X-ray diffraction (XRD), N₂ adsorption–desorption, Fourier transform infrared (FT-IR), vibrating sample magnetometer (VSM), thermogravimetric analyses (TGA), and scanning electron microscopy (SEM). More specifically, the effects of pH, temperature, arsenic ion concentration, and sorbent dosage were investigated on the arsenic adsorption. A total of 20 sets of experiments were designed by the software to achieve maximum adsorption capacity (q ₑ) and removal efficiency (R). Analysis of variance (ANOVA) of the two-factor interaction (2FI) model suggested that the predicted values were in good agreement with experimental data. The best local maximum values for pH, arsenic concentration, and sorbent dosage were found to be 2, 5 mg L⁻¹, and 0.1 g L⁻¹, respectively, that yielding maximum q ₑ of 44.99 mg g⁻¹ and a maximum R of 42.69 %. Additionally, the obtained value for desirability was equal to 0.862. The results indicated that the Langmuir model provided the best correlation of the equilibrium data. Moreover, the obtained results revealed that the pseudo-second-order kinetic model could best describe the adsorption kinetics.

Mine soils often contain high levels of metals that produce serious environmental problems and poor fertility conditions that limit their reclamation. The aim of this study was to evaluate the influence of a compost and biochar amendment on the nutrient phytoavailability in a mine soil from the depleted copper mine of Touro (Spain). For this purpose, a greenhouse experiment was carried out amending the mine soil with increasing proportions (20, 40, 80 and 100%) of the compost and biochar mixture and planting Brassica juncea plants. The results revealed that the mine soil had an extremely acid pH and low fertility conditions and was affected by copper contamination. The addition of compost and biochar to the mine soil increased soil pH values (from 2.7 to 8.7), total carbon (from undetectable values to 149 g kg⁻¹) and total nitrogen (from undetectable values to 11,130 mg kg⁻¹) contents and phytoavailable concentrations of K, Mg, Na and P and promoted plant growth, since B. juncea plants did not survive in the untreated mine soil. The application of amendment decreased the phytoavailable concentration of Al, Co, Cu, Fe and Ni in the soil, resulting in a reduction of copper toxicity. The use of compost and biochar as a soil amendment combined with B. juncea plants could be an efficient strategy for the reclamation of degraded soils with low fertility conditions.