The adverse effects of lead on human especially childhood have been well established. Largely due to the phase out of lead in gasoline, blood lead levels (BLLs) had declined substantially all over the world including China. In 2004, 2007, 2010, and 2013, we conducted a continuous project including 47,346 children aged 0–6 years old from 11 cities all over China to show how the decline happened and to explore what to do next to improve the BLLs of children of China. Our data shown the BLLs of Chinese children decreased from 46.38, 43.58, 38.95 to 37.17 μg/L, but the decline was not enough. These decline was mainly because of the number decrease of children with high BLLs. Integrated strategy should be used to promote the BLLs of Chinese children, like striving to improve the environment, setting new cutoff for high BLLs, and establishing routine blood lead screening.

This study investigated the effects of residual H₂O₂ on hydrolysis-acidification and methanogenesis stages of anaerobic digestion after microwave-H₂O₂ (MW-H₂O₂) pretreatment of waste activated sludge (WAS). Results showed that high sludge solubilization at 35–45 % was achieved after pretreatment, while large amounts of residual H₂O₂ remained and refractory compounds were thus generated with high dosage of H₂O₂ (0.6 g H₂O₂/g total solids (TS), 1.0 g H₂O₂/g TS) pretreatment. The residual H₂O₂ not only inhibited hydrolysis-acidification stage mildly, such as hydrolase activity, but also had acute toxic effect on methanogens, resulting in long lag phase, low methane yield rate, and no increase of cumulative methane production during the 30-day BMP tests. When the low dosage of H₂O₂ at 0.2 g H₂O₂/g TS was used in MW-H₂O₂ pretreatment, sludge anaerobic digestion was significantly enhanced. The cumulative methane production increased by 29.02 %, but still with a lag phase of 1.0 day. With removing the residual H₂O₂ by catalase, the initial lag phase of hydrolysis-acidification stage decreased from 1.0 to 0.5 day.

Anthropogenic chemicals in surface water and groundwater cause concern especially when the water is used in drinking water production. Due to their continuous release or spill-over at waste water treatment plants, active pharmaceutical ingredients (APIs) are constantly present in aquatic environment and despite their low concentrations, APIs can still cause effects on the organisms. In the present study, Chemcatcher passive sampling was applied in surface water, surface water intake site, and groundwater observation wells to estimate whether the selected APIs are able to end up in drinking water supply through an artificial groundwater recharge system. The API concentrations measured in conventional wastewater, surface water, and groundwater grab samples were assessed with the results obtained with passive samplers. Out of the 25 APIs studied with passive sampling, four were observed in groundwater and 21 in surface water. This suggests that many anthropogenic APIs released to waste water proceed downstream and can be detectable in groundwater recharge. Chemcatcher passive samplers have previously been used in monitoring several harmful chemicals in surface and wastewaters, but the path of chemicals to groundwater has not been studied. This study provides novel information on the suitability of the Chemcatcher passive samplers for detecting APIs in groundwater wells.

Rate coefficients for the gas-phase reactions of OH radicals and Cl atoms with 1-methoxy-2-propanone (1-M-2-PONE), 1-methoxy-2-propanol (1-M-2-POL), and 1-methoxy-2-butanol (1-M-2-BOL) were determined at room temperature and atmospheric pressure using a conventional relative-rate technique. The following absolute rate coefficients were derived: k ₁(OH + 1-M-2-PONE) = (0.64 ± 0.13) × 10⁻¹¹, k ₂(OH + 1-M-2-BOL) = (2.19 ± 0.23) × 10⁻¹¹, k ₃(Cl + 1-M-2-PONE = (1.07 ± 0.24) × 10⁻¹⁰, k ₄(Cl + 1-M-2-POL) = (2.28 ± 0.21) × 10⁻¹⁰, and k ₅ (Cl + 1-M-2-BOL) = (2.79 ± 0.23) × 10⁻¹⁰, in units of cm³ molecule⁻¹ s⁻¹. This is the first experimental determination of k ₂-k ₅. These rate coefficients were used to discuss the influence of the structure on the reactivity of the studied polyfunctional organic compounds. The atmospheric implications for 1-M-2-PONE, 1-M-2-POL, and 1-M-2-BOL and their reactions were investigated estimating atmospheric parameters such as lifetimes, global warming potentials, and average photochemical ozone production. The approximate nature of these values was stressed considering that the studied oxygenated volatile organic compounds are short-lived compounds for which the calculated parameters may vary depending on chemical composition, location, and season at the emission points.

Water pollution is a serious challenge to the public health. Among different forms of aquatic pollutants, chemical and biological agents create paramount threat to water quality when the safety standards are surpassed. There are many conventional remediatory strategies that are practiced such as resin-based exchanger and activated charcoal/carbon andreverse osmosis. Newer technologies using plants, microorganisms, genetic engineering, and enzyme-based approaches are also proposed for aquatic pollution management. However, the conventional technologies have shown impending inadequacies. On the other hand, new bio-based techniques have failed to exhibit reproducibility, wide specificity, and fidelity in field conditions. Hence, to solve these shortcomings, nanotechnology ushered a ray of hope by applying nanoscale zinc oxide (ZnO), titanium dioxide (TiO₂), and tungsten oxide (WO₃) particles for the remediation of water pollution. These nanophotocatalysts are active, cost-effective, quicker in action, and can be implemented at a larger scale. These nanoparticles are climate-independent, assist in complete mineralization of pollutants, and can act non-specifically against chemically and biologically based aquatic pollutants. Photocatalysis for environmental remediation depends on the availability of solar light. The mechanism of photocatalysis involves the formation of electron-hole pairs upon light irradiations at intensities higher than their band gap energies. In the present review, different methods of synthesis of nanoscale ZnO, TiO₂, and WO₃ as well as their structural characterizations have been discussed. Photodegradation of organic pollutants through mentioned nanoparticles has been reviewed with recent advancements. Enhancing the efficacy of photocatalysis through doping of TiO₂ and ZnO nanoparticles with non-metals, metals, and metal ions has also been documented in this report.

Zearalenone (ZEN) exerts a major effect on human and animal health and has led to serious worldwide economic problems. In this study, we investigated whether proanthocyanidin (PC) can prevent ZEN-induced testicular oxidative damage in male mice and explored the underlying mechanism. Kunming mice were injected with ZEN (40 mg kg⁻¹) on the 11th day after intragastric administration of PC (75 or 150 mg/kg) for 10 days; the sperm quality of mice was then analysed statistically. Additionally, testicular morphology parameters related to oxidative damage, apoptosis and the expression of endoplasmic reticulum (ER) stress-related genes (GRP78, CHOP and XBP-1) were all measured. Results showed that ZEN exposure significantly reduced the sperm density, improved the sperm aberration rate, increased the MDA level and reduced SOD and GSH-Px activities. Meanwhile, ZEN was attributed to the downregulation of the expressions of the gene and protein of Bcl-2 and upregulation of the expressions of the gene and protein of Bax and caspase-3. ZEN exposure also upregulated the mRNA expression of GRP78, CHOP and XBP-1; however, PC pre-treatment reduced ZEN-induced oxidative damage and tended to maintain normal testicular morphology. Furthermore, PC pre-treatment substantially downregulated the expressions of the GRP78, CHOP and XBP-1 and upregulated the expression of the Bcl-2 gene. In conclusion, PC, due to its anti-oxidative ability, could ameliorate ZEN-induced testicular reproductive toxicity in male mice by decreasing ER stress and testicular cell apoptosis.

ZnO samples were prepared by sol-gel method applying a factorial design in order to improve the photocatalytic properties of the semiconductor oxide in the NO photooxidation reaction. The concentrations of zinc acetate and ammonium hydroxide were selected as critical variables in the synthesis of ZnO. Nine samples of ZnO were obtained as product of the factorial design and were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, diffuse reflectance spectroscopy, and N₂ adsorption-desorption isotherms. The photocatalytic activity of ZnO samples was associated with the physical properties developed by each sample according to its respective conditions of synthesis. Some photocatalytic reaction parameters, such as mass of photocatalyst, irradiance, and relative humidity, were modified in order to evaluate its effect in the photocatalytic conversion of NO. As a relevant point, the relative humidity played an important role in the increase of the selectivity of the NO photooxidation reaction to innocuous nitrate ions when ZnO was used as photocatalyst.

Nitric oxide (NO) is a free radical molecule involved in an array of functions under physiological and adverse environmental conditions. As other free radical molecules, NO biological action depends on its cellular concentration, acting as a signal molecule when produced at low concentration or resulting in cellular damage when produced at sufficiently high levels to trigger nitro-oxidative stress. Over the last decade, significant progress has been made in characterizing NO metabolism and action mechanism, revealing that diverse biosynthetic routes can generate this free radical in plants and its action mainly occurs through posttranslational modification (nitration and S-nitrosylation) of target proteins. Intricate crosstalk networks between NO and other signaling molecules have been described involving phytohormones, other second messengers, and key transcription factors. This review will focus on our current understanding of NO interplay with phytohormones and other plant growth regulators under abiotic stress conditions.

Microbial regrowth in reclaimed water is an important issue restricting water reclamation and reuse. Previous studies about the effect of coagulation on microbial growth in reclaimed water were limited and inconsistent. In this study, microbial growth potentials of the effluent of a membrane bioreactor (MBR) for the treatment of domestic wastewater after coagulation was evaluated by using bacteria of various phyla, classes (α-Proteobacteria, β-Proteobacteria, γ-Proteobacteria, and Actinobacteriaa) or species isolated from wastewater treatment plants (WWTPs) and assimilable organic carbon (AOC) test strains. Bacterial growth increased considerably after coagulation with polyaluminum for the samples investigated in this study. The results revealed that the microbial growth potentials in the effluent of the MBR evidently increased after coagulation. The increase ratio of bacterial growth could reach up to 929 %. Specific UV absorbance (SUVA) of the samples averagely decreased 16.3 %, but the removal efficiencies of the excitation emission matrices (EEMs) were less than 5 % after coagulation. It is suggested that the organic matter which affected the bacterial growth might be substances having aromaticity (i.e., UV₂₅₄ absorbance) but little fluorescence. According to molecular weight (MW) distribution analysis, the coagulation was indeed effective in removing organic matters with large MW. The removal of large MW organic matters might be related to bacterial growth increase. The results indicated that posttreatments are needed after coagulation to maintain the biological stability of reclaimed water.

In this study, surfactant dioctyl sodium sulphosuccinate (DOSS)-mediated immobilized bacterial pretreatment of waste activated sludge (WAS) was experimentally proved to be an efficient and economically feasible process for enhancing the biodegradability of WAS. The maximal floc disruption with negligible cell cleavage was achieved at surfactant dosage of 0.009 g/g SS. Results of the outcome of bacterial pretreatment of sludge biomass revealed that chemical oxygen demand (COD) solubilization for deflocculated (EPS removed—bacterially pretreated) sludge was 20 %, which was higher than that of flocculated (14 %) or control (5 %). The pretreatment was swift in deflocculated sludge with a rate constant of about 0.064 h⁻¹. Biochemical methane potential (BMP) assay resulted in significant methane yield at 0.24 gCOD/gCOD for deflocculated sludge. Economic assessment of the proposed method showed a net profit of about 57.39 USD/ton of sludge.