The Tinto and Odiel rivers in southwest Spain drain the world’s largest sulfide mineral formation: the Iberian Pyrite Belt which has been worked since 2,500 BC. The Tinto and Odiel estuarine zones include both an extensive area of salt marsh and an intensively industrialized urban area. As a consequence of pyrite oxidation, the Tinto and Odiel rivers are strongly acidic (pH < 3) with unusually high and quite variable metal concentrations. In this study, seasonally varying concentrations of dissolved major and trace elements were determined in the acid mine drainage affected estuary of the Ría de Huelva. During estuarine mixing, ore-derived metal concentrations exhibit excellent correlations with pH as the main controlling parameter. As pH increases, concentrations of dissolved ore-associated elements are attenuated, and this process is enhanced during the summer months. The decrease in Fe and Al concentrations ranged from 80 to 100 % as these elements are converted from dissolved to sediment-associated forms in the estuary. Coprecipitation/adsorption processes also removed between 60 and 90 % of the originally dissolved Co, Cu, Mn, Pb, Zn, and Th; however, Cd and Ni exhibited a greater propensity to remain in solution, with an average removal of approximately 60 %. On the other hand, As and U exhibited a different behavior; it is likely that these elements remain in dissolved forms because of the formation of U carbonates and soluble As species. Concentrations of As remain at elevated levels in the outer estuary (average = 48 μg L⁻¹) which exceeds concentrations present in the Tinto River. Nevertheless, the estuary has recently witnessed improvements in water quality, as compared to results of several previous studies reported in the 1990s.

In the present study, an activated charcoal (AC) plate was prepared by physical activation method. Its surface was coated with TiO₂nanoparticles by electrophoretic deposition (EPD) method. The average crystallite size of TiO₂nanoparticles was determined approximately 28 nm. The nature of prepared electrode was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) surface area measurement before and after immobilization. The electrosorption and photocatalytic one-stage combined process was investigated in degradation of Lanasol Red 5B (LR5B), and the effect of dye concentration, electrolyte concentration, pH, voltage, and contact time was optimized and modeled using response surface methodology (RSM) approach. The dye concentration of 30 mg L⁻¹, Na₂SO₄concentration of 4.38 g L⁻¹, pH of 4, voltage of 250 mV, and contact time of 120 min were determined as optimum conditions. Decolorization efficiency increased in combined process to 85.65 % at optimum conditions compared to 66.03 % in TiO₂/AC photocatalytic, 20.09 % in TiO₂/AC electrosorption, and 1.91 % in AC photocatalytic processes.

A new approach to the problem of environmental hazard assessment and monitoring for pollutant biodegradation reaction systems in the presence of uncertainty is proposed using soft sensor-based pollutant concentration dynamic profile reconstruction techniques. In particular, a robust reduced-order soft sensor is proposed that can be digitally implemented in the presence of inherent complexity and the inevitable model uncertainty. The proposed method explicitly incorporates all the available information associated with a process model characterized by varying degrees of uncertainty, as well as available sensor measurements of certain physicochemical quantities. Based on the above information, a reduced-order soft sensor is designed enabling the reliable reconstruction of pollutant concentration profiles in complex biodegradation systems that can not be always achieved due to physical and/or technical limitations associated with current sensor technology. The option of using the aforementioned approach to compute toxic load and persistence indexes on the basis of the reconstructed concentration profiles is also pursued. Finally, the performance of the proposed method is evaluated in two illustrative environmental hazard assessment case studies.

In this research, the production of exo-pectinase by Bacillus pumilus using different agricultural wastes was studied. Agricultural wastes containing pectin such as wheat bran, sugar beet pulp, sunflower plate, orange peel, banana peel, apple pomace and grape pomace were tested as substrates, and activity of exo-pectinase was determined only in the mediums containing sugar beet pulp and wheat bran. Then, effects of parameters such as concentrations of solid substrate (wheat bran and sugar beet pulp) (A), ammonium sulphate (B) and yeast extract (C) on the production of exo-pectinase were investigated by response surface methodology. First, wheat bran was used as solid substrate, and it was determined that exo-pectinase activity increased when relatively low concentrations of ammonium sulphate (0.12–0.21 % w/v) and yeast extract (0.12–0.3 % w/v) and relatively high wheat bran (~5–6 % w/v) were used. Then, exo-pectinase production was optimized by response surface methodology using sugar beet pulp as a solid substrate. In comparison to P values of the coefficients, values of not greater than 0.05 of A and B²showed that the effect of these process variables in exo-pectinase production was important and that changes done in these variables will alter the enzyme activity.

Forty pesticides were selected in function of their chemical families and their physico-chemical properties to represent a wide range of pesticide properties. Adsorption of these pesticides was studied on two soils by batch experiments. The two soils differed largely in organic matter and calcite contents. Distribution coefficient Kdwas determined for each pesticide on the two soils. Adsorption was higher for the soil having the highest organic matter content and the lowest calcite content. In order to identify pesticide properties governing retention, eight molecular descriptors were determined from three-dimensional (3D) structure of molecules. Class-specific quantitative structure properties relationship (QSPR) soil adsorption models using one and two parameters were developed from experimental Kd. Three properties seemed to influence most retention of pesticides: hydrophobicity, solubility, and polarisability. Models combining these properties were suggested and discussed.

Ponds play an important role in urban areas. However, cyanobacterial blooms counteract the societal need for a good water quality and pose serious health risks for citizens and pets. To provide insight into the extent and possible causes of cyanobacterial problems in urban ponds, we conducted a survey on cyanobacterial blooms and studied three ponds in detail. Among 3,500 urban ponds in the urbanized Dutch province of North Brabant, 125 showed cyanobacterial blooms in the period 2009–2012. This covered 79 % of all locations registered for cyanobacterial blooms, despite the fact that urban ponds comprise only 11 % of the area of surface water in North Brabant. Dominant bloom-forming genera in urban ponds were Microcystis, Anabaena and Planktothrix. In the three ponds selected for further study, the microcystin concentration of the water peaked at 77 μg l⁻¹and in scums at 64,000 μg l⁻¹, which is considered highly toxic. Microcystin-RR and microcystin-LR were the most prevalent variants in these waters and in scums. Cyanobacterial chlorophyll-a peaked in August with concentrations up to 962 μg l⁻¹outside of scums. The ponds were highly eutrophic with mean total phosphorus concentrations between 0.16 and 0.44 mg l⁻¹, and the sediments were rich in potential releasable phosphorus. High fish stocks dominated by carp lead to bioturbation, which also favours blooms. As urban ponds in North Brabant, and likely in other regions, regularly suffer from cyanobacterial blooms and citizens may easily have contact with the water and may ingest cyanobacterial material during recreational activities, particularly swimming, control of health risk is of importance. Monitoring of cyanobacteria and cyanobacterial toxins in urban ponds is a first step to control health risks. Mitigation strategies should focus on external sources of eutrophication and consider the effect of sediment P release and bioturbation by fish.

We studied the tetrabromobisphenol A (TBBPA) and bisphenol A (BPA) patterns and their sources and transport in different land-use soils from Longtang, South China, a typical electronic waste recycling center. We also studied the reductive debromination of TBBPA in paddy soils. TBBPA and BPA concentrations (on a dry weight basis) were undetected–220 and 0.50–325 ng/g, respectively, and both increased, by similar factors, in the following order: pond sediments < paddy soils = vegetable soils < wasteland < dismantling sites < former open burning sites. BPA concentrations were higher than TBBPA concentrations in all six land-use soils, and they correlated significantly. TBBPA and BPA were transported through the soil profiles, being found at relatively high concentrations in soil 0–40 cm deep, but only at low concentrations in soil 40–80 cm deep. The surface soil concentrations appear to have been strongly affected by crude recycling activities, and former open burning and dismantling sites were the main point sources. The areas surrounding the open burning sites and dismantling sites have been contaminated not only by the dumping of waste residues but also by fly ash deposition, even though the agricultural soils are far from the point pollution sources. Some BPA in the soils is likely to be the reductive debromination product of TBBPA because the long rainy season promotes TBBPA transformation and because BPA can persist for a long time. Incubation experiments confirmed that TBBPA could be transformed into BPA and that BPA could accumulate in waterlogged paddy soils, and this may be why BPA concentrations were higher than TBBPA concentrations in the Longtang area.

The present work describes the application of an analytical procedure, utilizing ultra performance liquid chromatography (UPLC) coupled with mass spectrometry instrumentation, for the determination of 253 multiclass pesticides, classified in six different groups. Solid phase extraction was applied for the isolation and pre-concentration of target compounds in water samples. Surface waters of the lakes located in Northern Greece (Volvi, Doirani, and Kerkini), were collected in two time periods (fall/winter 2010 and spring/summer 2011) and analyzed, applying the developed analytical methods. Spatial distribution of detected pesticides was visualized using interpolation methods and geographical information systems (GIS). Pesticides with maximum concentrations were amitrole, propoxur, simazine, chlorpyrifos, carbendazim, triazophos, disulfoton-sulfone, pyridaben, sebuthylazine, terbuthylazine, atrazine, atrazine-desethyl, bensulfuron-methyl, metobromuron, metribuzin, rotenone, pyriproxyfen, and rimsulfuron. In Lake Kerkini, mainly carbamates and triazines were determined at elevated concentrations, near the coastal point of the NW side of the lake. Seasonal variations were strong among the applied pesticide classes and determined concentrations, indicating the contribution of pesticide application patterns and rainfall. Lake Doirani exhibited organophosphate pesticides at higher concentrations mainly at coastal points, while triazines emerged as the main pollutant during spring sampling. Lake Volvi exhibited the highest pesticide concentrations, mostly triazines and ureas at the central part of the lake. The occurrence of extreme values and nonconstant seasonal variations indicated that the concentrations were increased disproportionately during the second sampling, as a result of the varying contribution of pollution sources right after the application period. In all cases, the total concentration of pesticides increased during the second sampling period.

This study focused on the cadmium (Cd) tolerance of mangroves with application of phosphate (P) in order to explore whether exogenous P can alleviate Cd stress on these intertidal species. Kandelia obovata (S. L.) seedlings were cultivated in rhizoboxes under different levels of Cd and P concentrations. The speciation distributions of Cd in the rhizosphere and non-rhizosphere sediments were examined by sequential extraction procedures; organic acid in plant tissues and soil solution was measured by high-performance liquid chromatography; Cd and P accumulation in the plants was also determined. Results showed that considerable differences existed in Cd speciation distributions between rhizosphere and non-rhizosphere sediments. Root activity influenced the dynamics of Cd, P application increased the organic acid content in root tissues, P also increased Cd accumulation in roots whilst lowering Cd translocation from root to the above-ground tissues, and a significant positive correlation was found between Cd and P in roots (r = 0.905). It is postulated that Cd detoxification of K. obovata (S. L.) is associated with higher Cd immobilization in the presence of higher P and organic acid contents in root tissue.

Total reflection x-ray fluorescence spectroscopy (TXRF) is proposed for the elemental chemical analysis of crustal environmental samples, such as sediments and soils. A comparative study of TXRF with respect to flame atomic absorption spectroscopy and inductively coupled plasma optical emission spectroscopy was performed. Microwave acid digestion and suspension preparation methods are evaluated. A good agreement was found among the results obtained with different spectroscopic techniques and sample preparation methods for Cr, Mn, Fe, Ni, Cu, and Zn. We demonstrated that TXRF is suitable for the assessment of environmental contamination phenomena, even if the errors for Pb, As, V, and Ba are ingent.