The use of ultrasonication for cyanobacterial control in freshwater bodies has become increasingly popular during the last decades despite controversial efficiency on large scale application. Apart from that, little information is currently available regarding ultrasound toxicity potential towards non-target species. This work was designed to address this issue in the common carp using a low-power (7–9 W output) and dual-frequency (23 and 46 kHz) anti-cyanobacterial ultrasound device. Results showed that carps were unaffected by ultrasound exposure when exposed in floating cages in fish ponds over a 30-day period. The experiment duration was the main factor influencing all measured biological parameters in exposed and non-exposed organisms. Indeed, it was positively associated with an increase in fish condition factor. Cortisol level also tended to slightly increase over the number of days of experiment but its variation did not enable to sort out any ultrasound exposure-related stress. Moreover, an overall diminution along the experimental period of the expression level of a set of biomarkers could be reported, encompassing cellular antioxidant enzyme activities such as superoxide dismutase (SOD), glutathione peroxydase (GPx), catalase and glutathione S-transferase (GST), and lactate dehydrogenase activity. Subtle changes in these biomarkers were dependent of the type of enzyme activity and especially of the origin of fish (i.e., sampled pond) regardless of the presence of ultrasound equipment, reflecting thereby fish adaptation to local environmental conditions in each pond. In conclusion, this study does not provide indication that ultrasonication in the aforementioned conditions affects the welfare and physiological homeostasis of carps.

The cotton mealybug, Phenacoccus solenopsis Tinsley (Sternorrhyncha: Pseudococcidae) is a serious pest of various cultivated plants in Pakistan. Recent reports show that the parasitoid Aenasius bambawalei Hayat (Hymenoptera: Encyrtidae) is a good biocontrol agent of the pest. Compatibleness is important in any IPM programme, and the insecticide used must have little or no effects on the biological control agent. This study investigated the compatibility of neem treatments and a commercial insecticide, imidacloprid on A. bambawalei. Bioassays were laid out in a completely randomized design (CRD) under laboratory conditions. Results showed that the adult stage of the parasitoid was more susceptible to the commercial insecticide imidacloprid than the concealed pupal stage. Moreover, on the basis of the International Organization for Biological Control (IOBC) toxicity categories of the commercial insecticide, imidacloprid was moderately toxic throughout the study period (Ex >80%) while neem was slightly toxic after 24 h of use (Ex <80%). Results also suggest that A. bambawalei release should be delayed for at least 1 week after neem treatments. Because imidacloprid destroys A. bambawalei, it might cause resurgence of P. solenopsis; thus, farmers should avoid integrating the insecticide in the control of P. solenopsis.

To investigate the chemical properties of particulate matter (PM) in different public transport microenvironments in Hong Kong, the coarse (2.5–10 μm) and fine (<2.5 μm) PM samples were collected in three different types of transport modes including Mass Transit Railway (MTR)-Aboveground (AG), MTR Underground (UG), and Bus routes from October 2013 to April 2014. Average PM₂.₅ concentrations through UG, AG, and Bus routes were 47.9, 86.8, and 43.8 μg m⁻³, respectively, whereas the coarse PM concentrations were 4–5 folds less. The PM₂.₅ total metal concentrations of AG route were 2.3 and 3.7 times of UG and BUS routes, respectively, compared to those in the other two routes. The most abundant metals at three stations in PM₂.₅ and coarse PM were quite similar and mainly generated by frictional processes of wheels, rails, and brakes of the system as well as by the mechanical wearing of these parts. The most abundant PAH in three routes in PM₂.₅ was ATRQN, followed by 2-MNA, and the sum of them contributed to 35 and 42% of total PAHs in coarse PM and PM₂.₅, respectively. Crude oils, lubricant oil, diesel emissions would be the major sources of PAHs from MTR aboveground stations. The relative abundance of the n-alkanes among different samples was similar to the PAHs and the carbon preference index (CPI) values of the whole n-alkanes range were consistently from 0.99 to 1.04 among all samples indicating the significant contribution from the vehicle exhaust and fossil fuel burning. The concentrations of hopanes and steranes were higher in PM₂.₅ than in coarse PM due to diesel and coal burning. These results may provide a unique opportunity to investigate source specific contribution of the PM pollutants to the commuter exposure in public transport.

Biofilm formation and evolution are key factors to consider to better understand the kinetics of arsenopyrite biooxidation. Chemical and surface analyses were carried out using Raman spectroscopy, scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), glow discharge spectroscopy (GDS), and protein analysis (i.e., quantification) in order to evaluate the formation of intermediate secondary compounds and any significant changes arising in the biofilm structure of Acidithiobacillus thiooxidans during a 120-h period of biooxidation. Results show that the biofilm first evolves from a low cell density structure (1 to 12 h) into a formation of microcolonies (24 to 120 h) and then finally becomes enclosed by a secondary compound matrix that includes pyrite (FeS₂)-like, S ₙ ²⁻/S⁰, and As₂S₃ compounds, as shown by Raman and SEM-EDS. GDS analyses (concentration-depth profiles, i.e., 12 h) indicate significant differences for depth speciation between abiotic control and biooxidized surfaces, thus providing a quantitative assessment of surface-bulk changes across samples (i.e. reactivity and /or structure-activity relationship). Respectively, quantitative protein analyses and CLSM analyses suggest variations in the type of extracellular protein expressed and changes in the biofilm structure from hydrophilic (i.e., exopolysaccharides) to hydrophobic (i.e., lipids) due to arsenopyrite and cell interactions during the 120-h period of biooxidation. We suggest feasible environmental and industrial implications for arsenopyrite biooxidation based on the findings of this study.

Cyazofamid, as a fungicide of the novel cyanoimidazole chemical class, has been widely used to control tomato late blight. Understanding of cyazofamid residues in environment and crops is an essential prerequisite for its risk assessment. In this study, field investigations in four typical tomato-producing areas were conducted to explore the dissipation kinetics and residues of cyazofamid and its primary metabolite 4-chloro-5-p-tolylimidazole-2-carbonitrile (CCIM) in soil and tomato. A robust method using QuEChERS coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed for simultaneous analysis of cyazofamid and CCIM, with limits of quantification of 0.33 and 3.8 μg/kg, respectively. Field trials showed that the half-lives of cyazofamid were 3.6–6.9 days in soil and 12.2–18.3 days in tomato. The total residues of cyazofamid and CCIM in tomato collected at three time intervals were all below 0.5 mg/kg. Moreover, the potential risks of total residues via tomato intake to ten population subgroups were evaluated. We found that the risk quotient values were all generally low (0.13–1.3%), indicating that the recommended dose of cyazofamid on tomato will not result in a consumer exposure exceeding the toxicological reference value. Here, the results of field investigation provided important information for further understanding the behavior and risk of cyazofamid in the natural environment.

In this article, Cr(OH)₃ nanoparticle-modified cellulose nanocrystal (CNC) as a novel hybrid nanocomposite (Cr(OH)₃-NPs-CNC) was prepared by a simple procedure and used as a sorbent for adsorptive removal of methylene blue (MB) and malachite green (MG) from aqueous solution. Different kinetic models were tested, and the pseudo-second-order kinetic model was found more suitable for the MB and MG adsorption processes. The BET and Langmuir models were more suitable for the adsorption processes of MB and MG. Thermodynamic studies suggested that the adsorption of MB and MG onto Cr(OH)₃-NPs-CNC nanocomposite was a spontaneous and endothermic process. The maximum adsorption capacities for MB and MG were reached 106 and 104 mg/g, respectively, which were almost two times higher than unmodified CNC. The chemical stability and leaching tests of the Cr(OH)₃-NPs-CNC hybrid nanocomposite showed that only small amounts of chromium were leached into the solution.

According to the Food and Health Bureau and Trade and Industry Department of the Hong Kong Government, 90 % of the total food supply in Hong Kong was imported from the Mainland China. In addition, the hidden or illegal use of prohibited pesticides, food adulteration (e.g., using industrial salt in food processing, using gutter oil as cooking oil), and pollutions were periodically reported by the media. Excessive exposure to toxic heavy metals or persistent organic pollutants (POPs) from diet or environmental is inevitable amid industrialization and pollution. Understanding of the detoxification ability among nutrients in plant-based food (i.e., phytonutrients in green tea, onion, garlic, coriander, and turmeric) offers therapeutic and preventive effects against the poisoning effects due to these pollutants. Oxidative stress and pro-inflammatory actions are the common mechanisms for heavy metals or POPs toxicities, while phytonutrients counteracts these cellular insults by anti-oxidation, upregulation of anti-inflammatory pathways, and chelation.

The present work described that tertiary ammonium surfactants containing bromide ion as novel metal-free catalysts were innovatively coupled with peroxymonosulfate (PMS) to build a simple catalytic oxidation system, possessing outstanding catalytic ability with organic dye Reactive Red M-3BE (RR M-3BE) as the target pollutant. Furthermore, cetyltrimethylammonium bromide (CTAB), a representative of cationic surfactant, was selected to further investigate the catalytic oxidation performance. It is found that at the critical micelle concentration (CMC) of CTAB, the oxidation efficiency of the CTAB/PMS system was optimal due to the strong electrostatic attraction between the CTA⁺ micelle and reactive anions (Br⁻ and HSO₅ ⁻), concentrating HSO₅ ⁻ and Br⁻ at the micellar surface, which accelerated the catalytic oxidation reaction between Br⁻ and HSO₅ ⁻, generating a mass of highly active reactive species. A hybrid method that combined radical scavenger (methanol) with electron paramagnetic resonance (EPR) technology was adopted for the investigation of reactive species, and the results indicated that hydroxyl radical (•OH) was generated and had a major role in the process. The findings from this work provide a practicable pathway for highly efficient PMS activation in wastewater treatment, and also initiate a promising research area of surfactants in the field of environmental catalysis.

An experimental study was conducted at field conditions in order to evaluate the effect of application of ash from biomass combustion on some soil fertility characteristics and plant growth. Application of 7.5 Mg ha⁻¹ industrial fly ash (IA), domestic ash (DA), and a 50:50 mix of domestic ash (DA) and spent coffee grounds (SCG) was made in different soil parcels. Lolium perenne seeds were sown and the grown biomass was harvested and quantified after 60 days. Soil samples from each parcel were also collected after that period and characterized. Both soil and grown biomass samples were analyzed for Ca, Mg, Na, K, P, Fe, Mn, Zn, and Al contents. Soil pH was determined before and after amendment. All applications rose significantly soil pH. Domestic ash, whether combined with coffee grounds or not, proved to be efficient at supplying available macronutrients Ca, Mg, K, and P to the soil and also reducing availability of Al (more than industrial ash). However, it inhibited plant growth, even more when combined with spent coffee grounds. As regards to elemental abundance in plant tissue, both domestic ash treatments reduced Ca and enhanced Al contents, unlike industrial ash, which proved less harmful for the load applied in the soil. Hence, it was possible to conclude that application load should be a limiting factor for this management option for the studied materials.

The aim of this study was to investigate the removal of phenanthrene by combination of alfalfa, white-rot fungus, and earthworms in soil. A 60-day experiment was conducted. Inoculation with earthworms and/or white-rot fungus increased alfalfa biomass and phenanthrene accumulation in alfalfa. However, inoculations of alfalfa and white-rot fungus can significantly decrease the accumulation of phenanthrene in earthworms. The removal rates for phenanthrene in soil were 33, 48, 66, 74, 85, and 93% under treatments control, only earthworms, only alfalfa, earthworms + alfalfa, alfalfa + white-rot fungus, and alfalfa + earthworms + white-rot fungus, respectively. The present study demonstrated that the combination of alfalfa, earthworms, and white-rot fungus is an effective way to remove phenanthrene in the soil. The removal is mainly via stimulating both microbial development and soil enzyme activity.