The recycling of reclaimed wastewater for irrigation and road cleaning is an important strategy to minimize water scarcity in megacities. However, little is known regarding the potential accumulation of antibiotics contained in reclaimed wastewater in urban soil. We investigated the occurrence and distribution of eight quinolones (QNs), nine sulfonamides (SAs), and five macrolides (MLs) antibiotics in urban surface soil in Beijing and Shanghai, China. QNs, especially norfloxacin (NOR), ofloxacin (OFL), and ciprofloxacin (CIP) were the predominant antibiotics in urban surface soil, and NOR revealed the highest average concentration of 94.6 μg kg⁻¹. The antibiotic concentrations in urban soil in our study were higher than those detected in agricultural soils after long-term wastewater irrigation and manure fertilization. The concentrations of antibiotics in Shanghai urban soil showed a significant negative correlation with soil pH and a positive correlation with total organic carbon (TOC), reflecting the effect of speciation and soil organic matter content on sorption and retention. In addition, antibiotic concentrations in the urban soil were positively correlated with heavy metal contents, likely due to their coexistence in reclaimed wastewater and the promoting effect of metals on the sorption of antibiotics. In several soil samples, NOR, OFL, CIP, enrofloxacin (ENR), and fleroxacin (FLE) showed higher concentrations than the trigger value of 100 μg kg⁻¹ in soil, indicating a potential risk for the environment.

Relatively limited attention has been given to the presence of fungi in the aquatic environment compared to their occurrence in other matrices. Taking advantage and recognizing the biodegradable capabilities of fungi is important, since these organisms may produce many potent enzymes capable of degrading toxic pollutants. Therefore, the aim of this study was to evaluate the potential ability of some species of filamentous fungi that occur in the aquatic environment to degrade pesticides in untreated surface water. Several laboratory-scale experiments were performed using the natural microbial population present in the aquatic environment as well as spiked fungi isolates that were found to occur in different water matrices, to test the ability of fungi to degrade several pesticides of current concern (atrazine, diuron, isoproturon and chlorfenvinphos). The results obtained in this study showed that, when spiked in sterile natural water, fungi were able to degrade chlorfenvinphos to levels below detection and unable to degrade atrazine, diuron and isoproturon. Penicillium citrinum, Aspergillus fumigatus, Aspergillus terreus and Trichoderma harzianum were found to be able to resist and degrade chlorfenvinphos. These fungi are therefore expected to play an important role in the degradation of this and other pollutants present in the aquatic environment.

Diesel represents a common environmental contaminant as a result of operation, storage, and transportation accidents. The bioremediation of diesel in a contaminated soil is seen as an environmentally safe approach to treat contaminated land. The effectiveness of the remediation process is usually assessed by the degradation of the total petroleum hydrocarbon (TPH) concentration, without considering ecotoxicological effects. The aim of this study was to assess the efficacy of two bioremediation strategies in terms of reduction in TPH concentration together with ecotoxicity indices and changes in the bacterial diversity assessed using PCR-denaturing gradient gel electrophoresis (DGGE). The biostimulation strategy resulted in a 90 % reduction in the TPH concentration versus 78 % reduction from the natural attenuation strategy over 12 weeks incubation in a laboratory mesocosm-containing diesel-contaminated soil. In contrast, the reduction in the ecotoxicity resulting from the natural attenuation treatment using the Microtox and earthworm toxicity assays was more than double the reduction resulting from the biostimulation treatment (45 and 20 % reduction, respectively). The biostimulated treatment involved the addition of nitrogen and phosphorus in order to stimulate the microorganisms by creating an optimal C:N:P molar ratio. An increased concentration of ammonium and phosphate was detected in the biostimulated soil compared with the naturally attenuated samples before and after the remediation process. Furthermore, through PCR-DGGE, significant changes in the bacterial community were observed as a consequence of adding the nutrients together with the diesel (biostimulation), resulting in the formation of distinctly different bacterial communities in the soil subjected to the two strategies used in this study. These findings indicate the suitability of both bioremediation approaches in treating hydrocarbon-contaminated soil, particularly biostimulation. Although biostimulation represents a commercially viable bioremediation technology for use in diesel-contaminated soils, further research is required to determine the ecotoxicological impacts of the intervention.

Epidemiological studies demonstrate a linkage between morbidity and mortality and particulate matter (PM), particularly fine particulate matter (PM₂.₅) that can readily penetrate into the lungs and are therefore more likely to increase the incidence of respiratory and cardiovascular diseases. The present study investigated the compositions of cooking oil fume (COF)-derived PM₂.₅, which is the major source of indoor pollution in China. Furthermore, oxidative stress, cytotoxicity, apoptosis, and cell cycle arrest induced by COF-derived PM₂.₅ in primary fetal alveolar type II epithelial cells (AEC II cells) were also detected. N-acetyl-L-cysteine (NAC), a radical scavenger, was used to identify the role of oxidative stress in the abovementioned processes. Our results suggested that compositions of COF-derived PM₂.₅ are obviously different to PM₂.₅ derived from other sources, and COF-derived PM₂.₅ led to cell death, oxidative stress, apoptosis, and G0/G1 cell arrest in primary fetal AEC II cells. Furthermore, the results also showed that COF-derived PM₂.₅ induced apoptosis through the endoplasmic reticulum (ER) stress pathway, which is indicated by the increased expression of ER stress-related apoptotic markers, namely GRP78 and caspase-12. Besides, the induction of oxidative stress, cytotoxicity, apoptosis, and cell cycle arrest was reversed by pretreatment with NAC. These findings strongly suggested that COF-derived PM₂.₅-induced toxicity in primary fetal AEC II cells is mediated by increased oxidative stress, accompanied by ER stress which results in apoptosis.

Pollution on electrical insulators is one of the greatest causes of failure of substations subjected to high levels of salinity and environmental pollution. Considering leakage current as the main indicator of pollution on insulators, this paper focuses on establishing the effect of the environmental conditions on the risk of failure due to pollution on insulators and determining the significant change in the magnitude of the pollution on the insulators during dry and humid periods. Hierarchical segmentation analysis was used to establish the effect of environmental conditions on the risk of failure due to pollution on insulators. The Kruskal-Wallis test was utilized to determine the significant changes in the magnitude of the pollution due to climate periods. An important result was the discovery that leakage current was more common on insulators during dry periods than humid ones. There was also a higher risk of failure due to pollution during dry periods. During the humid period, various temperatures and wind directions produced a small change in the risk of failure. As a technical result, operators of electrical substations can now identify the cause of an increase in risk of failure due to pollution in the area. The research provides a contribution towards the behaviour of the leakage current under conditions similar to those of the Colombian Caribbean coast and how they affect the risk of failure of the substation due to pollution.

Soil is widely used as adsorbent for removing toxic pollutants from their aqueous solutions due to its wide availability and cost efficiency. This study investigates the potential of soil and soil composites for removal of crystal violet (CV) dye from solution on a comparative scale. Optimisation of different process parameters was carried out using a novel approach of response surface methodology (RSM) and a central composite design (CCD) was used for determining the optimum experimental conditions, as well as the result of their interactions. Around 99.85 % removal of CV was obtained at initial pH 6.4, which further increased to 99.98 % on using soil and cement composite proving it to be the best admixture of those selected. The phenomenon was found to be represented best by the Langmuir isotherm at different temperatures. The process followed the pseudo-second-order kinetic model and was determined to be spontaneous chemisorption in nature. This adsorbent can hence be suggested as an appropriate liner material for the removal of CV dye.

The chemical extractability of As and Pb (by 5 mM CaCl₂, 0.1 M HCl, 0.05 M NH₄(H₂PO₄), and aqua regia) from soils and their phytoavailability (by Brassica juncea) were assessed using 16 soil samples collected as a function of distance from mine pits across three long-term abandoned metallic mine sites. The total concentrations of As and Pb (17–41,000 and 27–10,047 mg kg⁻¹, respectively) decreased with increasing separation distance from the mine pits along a declining slope. However, the percentage of chemically leachable As and Pb mass (e.g., by 5 mM CaCl₂, 0.1 M HCl, or 0.05 M NH₄(H₂PO₄)) relative to total mass (e.g., by aqua regia) tended to increase exponentially with distance, indicating more chemically labile fractions present in less contaminated downgradient soils. Among soil components, extractable As concentrations were best described by coupling DCB-Al with other Al and Fe oxides. For Pb concentration, pH coupled to DCB-Al or Ox-Al provided a good predictive relationship. The inhibitory growth and uptake by plants were best correlated with the extractable concentrations by 5 mM CaCl₂and 0.1 M HCl. In conclusion, the chemical extractability and phytoavailability of As and Pb are highly influenced by the relative labile fraction in abandoned mine soils, and its distribution in soils is essentially correlated with sampling distance from mine pits.

The objective of this work was to study the degradation and mineralization of ethylenethiourea (ETU) in water by ozonation at different pH values and in the presence of hydrogen peroxide. Degradation experiments were performed using an initial ETU concentration of 50 ppm for 180 min with a gas flux of 0.25 dm³ min⁻¹and an O₃production rate of 12.1 mg min⁻¹. Degradation of by-products was monitored by direct injection electrospray ionization mass spectrometry (ESI-MS), ETU concentration was determined by HPLC-UV, and its mineralization was detected by total organic carbon (TOC) analysis. Optimum degradation of ETU in water was observed at pH = 11, whereas at pH = 3, the degradation of ETU was slowest, indicating that the reaction occurred through different mechanisms. The additional effects of hydroxyl radicals formed at the highest pH can be used to explain the results obtained in this study. Peroxone experiments were carried out in the presence of 400 and 800 mg L⁻¹H₂O₂; the degradation of ETU was faster at 400 mg L⁻¹H₂O₂. This was attributed to the scavenging effect of the excess H₂O₂. ETU treatment by ozonation produced several by-products of degradation such as ethylene urea and 2-imidazoline.

The conventional multicriteria decision analysis (MCDA) methods used for pollution control generally depend on the data currently available. This could limit their real-world applications, especially where the input data (e.g., the most cost-effective remediation cost and eventual contaminant concentration) might vary by scenario. This study proposes an optimization-based MCDA (OMCDA) framework to address such a challenge. It is capable of (1) capturing various preferences of decision-makers, (2) screening and analyzing the performance of various optimized remediation strategies under changeable scenarios, and (3) compromising incongruous decision analysis results. A real-world case study is employed for demonstration, where four scenarios are considered with each one corresponding to a set of weights representative of the preference of the decision-makers. Four criteria are selected, i.e., optimal total pumping rate, remediation cost, contaminant concentration, and fitting error. Their values are determined through running optimization and optimization-based simulation procedures. Four sets of the most desired groundwater remediation strategies are identified, implying specific pumping rates under varied scenarios. Results indicate that the best action lies in groups 32 and 16 for the 5-year, groups 49 and 36 for the 10-year, groups 26 and 13 for the 15-year, and groups 47 and 13 for the 20-year remediation.

Crop irrigation with heavy metal-contaminated effluents is increasingly common worldwide and necessitates management strategies for safe crop production on contaminated soils. This field study examined the phytoavailability of three metals (Cd, Cu, and Zn) in two cereal (wheat, maize) and legume (chickpea, mungbean) crops in response to the application of either phosphatic fertilizer or sewage-derived water irrigation over two successive years. Five fertilizer treatments, i.e. control, recommended nitrogen (N) applied alone and in combination of three levels of phosphorus (P), half, full and 1.5 times of recommended P designated as N₀P₀, N₁P₀, N₁P₀.₅, N₁P₁.₀, and N₁P₁.₅, respectively. Tissue concentrations of Cd, Cu, Zn, and P were determined in various plant parts, i.e., root, straw, and grains. On the calcareous soils studied while maximum biomass production was obtained with application of P at half the recommended dose, the concentrations of metals in the crops generally decreased with increasing P levels. Tissue metal concentrations increased with the application of N alone. Translocation and accumulation of Zn and Cu were consistently higher than Cd. And the pattern of Cd accumulation differed among plant species; more Cd being accumulated by dicots than monocots, especially in their grains. The order of Cd accumulation in grains was maize > chickpea > mungbean > wheat. Mungbean and chickpea straws also had higher tissue Cd concentration above permissible limits. The two legume species behaved similarly, while cereal species differed from each other in their Cd accumulation. Metal ion concentrations were markedly higher in roots followed by straw and grains. Increasing soil-applied P also increased the extractable metal and P concentrations in the post-harvest soil. Despite a considerable addition of metals by P fertilizer, all levels of applied P effectively decreased metal phytoavailability in sewage-irrigated soils, and applying half of the recommended dose of P fertilizer was the most feasible solution for curtailing plant metal uptake from soils. These findings may have wide applications for safer crop production of monocot species when irrigating crops with sewage effluent-derived waters.