Various mineral processing operations to produce pure metals from mineral ores generate sludges, residues, and other unwanted by-products/wastes. As a general practice, these wastes are either stored in a reservoir or disposed in the surrounding of mining/smelting areas, which might cause adverse environmental impacts. Therefore, it is important to understand the various characteristics like heavy metal leaching features and potential toxicity of these metallurgical wastes. In this study, zinc plant leach residues (ZLRs) were collected from a currently operating Zn metallurgical industry located in Minas Gerais (Brazil) and investigated for their potential toxicity, fractionation, and leachability. Three different ZLR samples (ZLR1, ZLR2, and ZLR3) were collected, based on their age of production and deposition. They mainly consisted of Fe (6–11.5 %), Zn (2.5 to 5.0 %), and Pb (1.5 to 2.5 %) and minor concentrations of Al, Cd, Cu, and Mn, depending on the sample age. Toxicity Characteristic Leaching Procedure (TCLP) results revealed that these wastes are hazardous for the environment. Accelerated Community Bureau of Reference (BCR) sequential extraction clearly showed that potentially toxic heavy metals such as Cd, Cu, Pb, and Zn can be released into the environment in high quantities under mild acidic conditions. The results of the liquid-solid partitioning as a function of pH showed that pH plays an important role in the leachability of metals from these residues. At low pH (pH 2.5), high concentrations of metals can be leached: 67, 25, and 7 % of Zn can be leached from leach residues ZLR1, ZLR2, and ZLR3, respectively. The release of metals decreased with increasing pH. Geochemical modeling of the pH-dependent leaching was also performed to determine which geochemical process controls the leachability/solubility of the heavy metals. This study showed that the studied ZLRs contain significant concentrations of non-residual extractable fractions of Zn and can be seen as a potential secondary resource for Zn.

Knowledge on ecosystem functioning can largely contribute to promote ecosystem-based management and its application. The Mar Piccolo of Taranto is a densely populated area at a high risk of environmental crisis. Here, planktonic primary production (PP) and heterotrophic prokaryotic production (HPP) were measured as proxies of functioning in three sampling sites located in two inlets at different levels of industrial contamination, during three sampling surveys (June 2013, February and April 2014). To have a better overall view and provide some insights into the benthic-pelagic coupling, we integrated PP and HPP in the water column with those in the sediments and then discussed this with the origin of the organic matter pools based on analysis of stable isotopes. Heavy metals and polychlorobiphenyls (PCBs) were also analysed in the surface (1 cm) sediment layer and related to the overall ecosystem functioning. Multidimensional scaling (MDS) analysis, based on the main data, clearly separated the second inlet from the first one, more severely impacted by anthropogenic activities. The stable isotope mixing model suggested the prevalent terrestrial/riverine origin of the particulate organic matter pools (mean 45.5 %) in all sampling periods, whereas phytoplankton contributed up to 29 % in February. Planktonic PP and HPP rates followed the same pattern over the entire study period and seemed to respond to phytoplankton dynamics confirming this community as the main driver for the C cycling in the water column. On the contrary, benthic PP rates were almost negligible while HPP rates were lower or comparable to those in the water column indicating that although the Mar Piccolo is very shallow, the water column is much more productive than the surface sediments. The sediment resuspension is likely responsible for a pulsed input of contaminants into the water column. However, their interference with the proper functioning of the pelagic ecosystem seems to be limited to the bottom layers.

Cadmium (Cd) is one of the most toxic metals and is widely distributed in freshwater and marine environments. It has received much attention from a toxicological perspective. The aim of this study was to assess the effect of Cd in the peacock blenny Salaria pavo, a species of the family of blennies that was used as bioindicator of water pollution. We performed a sublethal contamination of fish to 2 mg CdCl₂ L⁻¹ during 1, 4, 10, and 15 days. Cd accumulation was measured in gills and liver and displayed a significant increase of its concentration throughout the experiment, with slightly higher levels in the liver, except after 4 days. Partial-length cDNA of mt1, mt2, mnsod, cuznsod, cat, and gpx were characterized. Results from mRNA expression levels displayed an up-regulation of mt2 and mnsod. Biomarker activities were determined in gills and liver. In gills, data displayed an inhibition of EROD and GST activities. Cd exposure significantly increased GPx activities but did not affect CAT levels throughout the experiment. No LPO induction was observed in gills of exposed fish. Regarding the liver, the activity of all enzymes and MDA levels increased significantly from the beginning of the experiment except EROD that increased after 15 days of contamination only. At the histological level, fish exhibited pathological symptoms in gills and liver with a predominance of circulatory disturbances in gills and regressive changes in the liver. Our results displayed that peacock blennies are able to survive Cd toxicity due to various physiological adaptation mechanisms.

Microalgae possess the ability to grow and glean nutrients from wastewater; such wastewater-grown biomass can be used as a biofertilizer for crops. The present investigation was undertaken to evaluate two formulations (formulation with unicellular microalgae (MC1) and formulation with filamentous microalgae (MC2); T4 and T5, respectively), prepared using wastewater-grown microalgal biomass, as a biofertilizer (after mixing with vermiculite/compost as a carrier) in wheat crop (Triticum aestivum L. HD2967) under controlled conditions. The highest values of available nitrogen (N), phosphorus (P), and potassium (K) in soil and nitrogen-fixing potential were recorded in treatment T5 (75 % N + full-dose PK + formulation with filamentous microalgae (MC2). Microbial biomass carbon was significantly enhanced by 31.8–67.0 % in both the inoculated treatments over control (recommended dose of fertilizers), with highest values in T4 (75 % N + full-dose PK + formulation with unicellular microalgae (MC1)). Both the microalgal formulations significantly increased the N, P, and K content of roots, shoots, and grains, and the highest total N content of 3.56 % in grains was observed in treatment T5. At harvest stage, the treatments inoculated with microalgal formulations (T4 and T5) recorded a 7.4–33 % increase in plant dry weight and up to 10 % in spike weight. The values of 1000-grain weight showed an enhancement of 5.6–8.4 %, compared with T1 (recommended doses of fertilizers). A positive correlation was observed between soil nutrient availability at mid crop stage and plant biometrical parameters at harvest stage. This study revealed the promise of such microalgal consortia as a biofertilizer for 25 % N savings and improved yields of wheat crop.

Risk assessment and technical feasibility of brick formation from exhausted paper mill sludge derived biochar obtained after its use as an adsorbent for the treatment of effluent containing pentachlorophenol was studied. The bricks were prepared by geopolymerization mechanism in presence of sodium hydroxide, and the extent of geopolymerization was determined on the basis of crystal structure, surface functionalities, and surface morphology of the bricks. The preparation parameters (sodium hydroxide dosage, initial water and calcium carbonate content and curing temperature) were optimized and the results were analyzed in terms of compressive strength, water absorption, and abrasion index. Risk assessment of heavy metals was performed to determine the contamination level and overall hazard index of the biochar-based geopolymer bricks. Hazard quotient and hazard index were calculated to assess the overall non-carcinogenic risk posed by selected heavy metals via ingestion and dermal contact. The leaching potential of heavy metal and pentachlorophenol from the biochar-based geopolymer bricks was also determined. The results showed that the biochar-based geopolymer bricks showed good mechanical properties and the concentration of heavy metals in the leachate falls within the permissible limits prescribed by Indian Standards for Industrial and Sewage Effluents Discharge (inland surface water).

Taking advantage of the continuous spatial coverage, satellite-derived aerosol optical depth (AOD) products have been widely used to assess the spatial and temporal characteristics of fine particulate matter (PM2.5) on the ground and their effects on human health. However, the national-scale ground-level PM2.5 estimation is still very limited because the lack of ground PM2.5 measurements to calibrate the model in China. In this study, a national-scale geographically weighted regression (GWR) model was developed to estimate ground-level PM2.5 concentration based on satellite AODs, newly released national-wide hourly PM2.5 concentrations, and meteorological parameters. The results showed good agreements between satellite-retrieved and ground-observed PM2.5 concentration at 943 stations in China. The overall cross-validation (CV) R ² is 0.76 and root mean squared prediction error (RMSE) is 22.26 μg/m³ for MODIS-derived AOD. The MISR-derived AOD also exhibits comparable performance with a CV R ² and RMSE are 0.81 and 27.46 μg/m³, respectively. Annual PM2.5 concentrations retrieved either by MODIS or MISR AOD indicated that most of the residential community areas exceeded the new annual Chinese PM2.5 National Standard level 2. These results suggest that this approach is useful for estimating large-scale ground-level PM2.5 distributions especially for the regions without PMs monitoring sites.

Haze from urban sites in Beijing was collected with a self-assembled electrostatic dust collector. The sizes and morphologies, thermal properties, and compositions of the particles in the haze were characterized by scanning electronic microscopy (SEM), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), and X-ray photoelectric spectroscopy (XPS), respectively. Based on these results, the causes and pollutant sources of the chemicals in the haze were analyzed, and some countermeasures were further advanced to reduce the related pollutant sources. Graphical abstract ᅟ

Hydrogen is an energy carrier of the future need. It could be produced from different sources and used for power generation or as a transport fuel which mainly in association with fuel cells. The primary challenge for hydrogen production is reducing the cost of production technologies to make the resulting hydrogen cost competitive with conventional fuels. Thermocatalytic decomposition (TCD) of methane is one of the most advantageous processes, which will meet the future demand, hence an attractive route for COₓ free environment. The present study deals with the production of hydrogen with 30 wt% of Ni impregnated in commercially available activated carbon and carbon black catalysts (samples coded as Ni₃₀/AC and Ni₃₀/CB, respectively). These combined catalysts were not attempted by previous studies. Pure form of hydrogen is produced at 850 °C and volume hourly space velocity (VHSV) of 1.62 L/h g on the activity of both the catalysts. The analysis (X-ray diffraction (XRD)) of the catalysts reveals moderately crystalline peaks of Ni, which might be responsible for the increase in catalytic life along with formation of carbon fibers. The activity of carbon black is sustainable for a longer time compared to that of activated carbon which has been confirmed by life time studies (850 °C and 54 sccm of methane).

Massive utilization of bisphenol A (BPA) in the industrial production of polycarbonate plastics has led to the occurrence of this compound (at μg/L to ng/L level) in the water treatment plant. Nowadays, the presence of BPA in drinking water sources is a major concern among society because BPA is one of the endocrine disruption compounds (EDCs) that can cause hazard to human health even at extremely low concentration level. Parallel to these issues, membrane technology has emerged as the most feasible treatment process to eliminate this recalcitrant contaminant via physical separation mechanism. This paper reviews the occurrences and effects of BPA toward living organisms as well as the application of membrane technology for their removal in water treatment plant. The potential applications of using polymeric membranes for BPA removal are also discussed. Literature revealed that modifying membrane surface using blending approach is the simple yet effective method to improve membrane properties with respect to BPA removal without compromising water permeability. The regeneration process helps in maintaining the performances of membrane at desired level. The application of large-scale membrane process in treatment plant shows the feasibility of the technology for removing BPA and possible future prospect in water treatment process.

Metals in sediments are present in different chemical forms which affect their ability to transfer. The objective of this body of work was to compare different extraction methods for the bioavailability evaluation of some elements, such as Ba, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Ni, Pb, V and Zn from Serbian river sediments. A bioavailability risk assessment index (BRAI) was used for the quantification of heavy metal bioavailability in the sediments. Actual and potential element availability was assessed by single extractions with mild (CaCl₂ and CH₃COONH₄) and acidic (CH₃COOH) extractants and complexing agents (EDTA). Aqua regia extraction was used for the determination of the pseudo-total element content in river sediments. In different single extraction tests, higher extraction of Cd, Cu, Zn and Pb was observed than for the other elements. The results of the single extraction tests revealed that there is a considerable chance of metal leaching from the sediments assessed in this study. When the BRAI was applied, the results showed a high risk of heavy metal bioavailability in Serbian river sediments.