In this modern era, the importance of information and communication technology (ICT) cannot be ignored for sustainable human development. However, Pakistan has experienced a considerable gap between ICT economic growth and human development. In this regard, this study has modeled the relationship between ICT, economic growth, and the human development index (HDI) considering urbanization, foreign direct investment (FDI), and trade for the period from 1990 to 2014. An autoregressive distributed lag (ARDL) and vector error correction model (VECM) approaches are used to analyze the data. The empirical results reveal that ICT promote human development index. Along with, economic growth has a positive and significant impact on human development. Besides, urbanization, trade, and FDI discourage human development in Pakistan. Finally, bidirectional causality is detected between the aforementioned variables. Recommendations to policymakers regarding the productive role of FDI and trade are provided.

Grafting polyacrylamide (PAM) chains onto microparticles may combine the advantages of the flocculation property of the former and the fast sedimentation of the later to realize better flocculation performance. In this work, inexpensive microcrystalline cellulose (MCC) microparticles, and monomer of acrylamide (AM) were mixed, and then irradiated under microwave. The obtained material was characterized by Fourier transform infrared spectroscopy and X-ray diffraction, and the results demonstrated successful modification of MCC with AM on the particle surface. The modification procedure has been carefully investigated to obtain an optimum preparation condition. Kaolin suspension was selected as a model to evaluate the flocculation properties of the obtained AM-MCC. Our results indicate that the AM-MCC with the highest grafting ratio of 95.5% exhibits the best flocculation performance, which is even better than that of PAM, and the turbidity can be decreased to 1.4% of the naked kaolin suspension within 2.5 min. Therefore, this work provides a low cost strategy to prepare biodegradable AM-MCC, which may have promising potential application in the water treatment and other fields.

Arbuscular mycorrhizal (AM) fungi were of importance in mitigating soil erosion, which was highly influenced by biotic and abiotic factors, such as host plant growth and soil nutrient. To investigate the impact of nitrogen (N) fertilization on seasonal variance in AM colonization and soil erosion, we conducted a field experiment with rice cultivation under four N fertilizer levels (0 kg N ha⁻¹, 270 kg N ha⁻¹, 300 kg N ha⁻¹, and 375 kg N ha⁻¹ plus organic fertilizers) in the Taihu Lake region, China. We investigated AM colonization before rice transplantation, during rice growth, and after rice harvest. We also assessed soil splash erosion of intact soil cores sampled at tillering and after rice harvest. We found that AM colonization (indicated by percentage of root length colonization) varied from 15 to 73%, which was attributed to rice growth, N fertilization, and their interaction. Soil loss due to splash erosion was cut down by organic N fertilizer at tillering, while higher inorganic N fertilization significantly increased soil loss after rice harvest. Additionally, we found significantly negative relationships of AM colonization to soil loss but positive relationships to soil aggregate stability. We highlighted the potential role of AM fungi in decreasing soil erosion and suggested that high N fertilization should be considered carefully when seeking after high yields.

Numerous studies have investigated the impacts of ambient fine particulate matter (PM₂.₅) on human health. In this study, we examined the association of daily PM₂.₅ concentrations with the number of deaths for the cerebrovascular disease on the same day, using the generalized additive model (GAM) controlling for temporal trend and meteorological variables. We used the data between 2012 and 2014 from Shanghai, China, where the adverse health effects of PM₂.₅ have been of particular concern. Three different approaches (principal component analysis, shrinkage smoothers, and the least absolute shrinkage and selection operator regularization) were used in GAM to handle multicollinear meteorological variables. Our results indicate that the average daily concentration of PM₂.₅ in Shanghai was high, 55 μg/m³, with an average daily death for cerebrovascular disease (CVD) of 62. There was 1.7% raised cerebrovascular disease deaths per 10 μg/m³ increase in PM₂.₅ concentration in the unadjusted model. However, PM₂.₅ concentration was no longer associated with CVD deaths after controlling for meteorological variables. The results were consistent in the three modelling techniques that we used. As a large number of people are exposed to air pollution, further investigation with longer time period including individual-level information is needed to examine the association.

The application of biosorption operation has gained attention in the removal and retrieval of toxic metal ions from water bodies. Wastewater from industrial activity generally presents great complexity due to the coadsorption of cations to the inactive biomass binding sites. In this work, the competitive biosorption of Cu(II) and Ag(I) ions was studied in batch systems. A kinetic study applying a non-acidified and acidified waste of Sargassum filipendula in equimolar and non-equimolar metal samples was carried out and the acidified biosorbent was selected due to higher removal rates and selectivity of silver ions. The assays were performed with 2 g L⁻¹ of biosorbent concentration at 25 °C for 12 h and pH was controlled at around 5.0. Copper presented higher affinity for the biosorbent and a fast biosorption kinetic profile, while silver equilibrium times exhibited dependence on the copper concentration. External diffusion is the rate-limiting step in Cu(II) ion removal and it might also limit the kinetic rates of Ag(I) ions with intraparticle diffusion, depending on the initial concentration of metal cations. The ion-exchange mechanism is evidenced and complexation and electrostatic attraction mechanisms might be suggested, explained by simultaneous chemisorption and physisorption processes during the operation. Calcium and sodium were released in considerable amounts by the ion-exchange mechanism. Characterization analyses confirmed the role of several functional groups in the competitive biosorption accompanied by a homogenous covering of both metal ions on the surface of the particles. Particle porosity analyses revealed that the material is macroporous and an appreciable amount of macropores are filled with metal cations after biosorption.

This study was conducted to investigate the effects of maternal exposure to bisphenol A (BPA) on testis development of F1 male mice. The BPA exposure model of pregnant mice was prepared by intragastric administration of BPA at the doses of 0, 2.5, 5, 10, 20, and 40 mg/kg/day at gestation day (GD) 0.5–17.5. The testis index of the offspring mice was calculated at postnatal day (PND) 21 and PND 56. The results showed that maternal exposure to 20 mg/kg BPA during pregnancy significantly increased the testicular index of F1 males at PND 21, and 40 mg/kg BPA significantly decreased the testicular index of F1 males at PND 56 (P < 0.01). BPA significantly reduced serum testosterone (T) and estradiol (E₂) levels, and improved testicular ERα and ERβ levels in F1 males at both PND 21 and PND 56. BPA exposure also upregulated transcription of testicular Dnmt1 and inhibited the transcription of testicular Dnmt3A and Dnmt3B in F1 mice at PND 21. BPA reduced the transcriptional level of testicular DNA methyltransferase (Dnmt), increased the expression of testicular caspase-7, caspase-9, and bax, and decreased the expression of bcl-2 in F1 mice at PND 56. Consistent with that, BPA improved the apoptosis rate in the testis at PND 56 (P < 0.01 or P < 0.05). Our study indicates that BPA disrupts the secretion of testosterone, estradiol, and estrogen receptors by interfering with the transcription of testicular DNA methyltransferase (Dnmt) in offspring males, which damages testicular tissues and affects the potential reproductive function.

Based on the environmental Kuznets curve (EKC) hypothesis, the aim of this paper is to examine the relationships among per capita CO₂ emissions, per capita real GDP, per capita renewable energy consumption, and urbanization in a panel of five Central Asian countries (Kazakhstan, Kyrgyz Republic, Tajikistan, Turkmenistan, and Uzbekistan) from 1992 to 2013. For robustness checking, three estimator techniques reveal no evidence of inverted U-shape EKC consistently. Moreover, renewable energy consumption plays negative impact on emissions, while urbanization plays positive, significantly. The findings of heterogeneous panel causality suggest that there are bidirectional causalities; each other expect no causality from emissions to renewable energy. Finally, some implications, such as developing a small renewable energy project and sustainable urbanization and strengthening in-regional and out-regional cooperation, are given in this region.

As an important renewable energy source, wind power plays a key role in mitigating climate change and has become one of the fastest growing clean energies globally. In China, wind energy development has been a vital component of national energy transformation strategy. Over the years, the Chinese government has introduced a series of policies to promote the development of wind power and also to regulate this emerging industry. Base on examining all the key policy documents on wind power issued by the Chinese government over the last 30 years, we find that China has built up a comprehensive policy system, and summarized the current framework of Chinese wind power policy systematically. Then, we analyze the policy objectives, policy tools, major measures, their results in each development stage, and the characteristics and trends of China’s wind power policies. Finally, we discuss the limitations of the current policy and put forward corresponding suggestions.

Bisphenol A (BPA) is a key endocrine-disrupting chemical (EDC) in the manufacturing industry. It is found in the structure of compounds such as polycarbonate and epoxy in combination with other chemicals. Our objective was to investigate the effect of BPA on rat ovaries. A total of 32 female rats were divided into four equal groups: In group 1 (control), vehicle was administered; in group 2, BPA 50 μg/day was administered intraperitoneally; in group 3, BPA 100 mg/kg/day was administered intraperitoneally; and in group 4, BPA 100 mg/kg/day and vitamin C (50 mg/kg) were administered intraperitoneally, while vitamin E (50 mg/kg) was administered intramuscularly. Thirty days after the treatment, the effects of BPA on the ovaries were evaluated by terminal deoxynucleotidyltransferase [TdT]-mediated dUTP-biotin nick end labeling (TUNEL) assay. There was no difference in the number of apoptotic cells between group 2 and group 4. In addition, there was no significant difference between control group and group 2, 4. However, the number of apoptotic cells per unit area was significantly increased in group 3 compared with all groups (p < 0.01, p < 0.05). In conclusion, this study showed that high doses of BPA (100 mg/kg/day) have a toxic effect on the ovaries. The fact that the number of apoptotic cells in the group administered with high dose of BPA + 50 mg/kg/day vitamin C + 50 mg/kg/day vitamin E was lower than that of the high-dose BPA-administered group shows that these vitamins may have a protective effect.

Noise is one of the most significant sources of environmental pollution in metro cities. Traffic noise plays an important role to contribute to ambient noise pollution. Noise pollution monitoring was carried out using sound level meter mounted on the cycle with the help of mould fixed on it. Cycle is a noiseless mode of transport and therefore, it was used for noise monitoring over 700 locations in Nagpur City. Noise levels were recorded at each location for 5 min during peak rush hours of traffic in the morning and in the evening at an interval of 1 s leading to around 300 readings each. Noise indices like Lₑq, L₉₀, L₁₀, Lₘₐₓ and Lₘᵢₙ were calculated for noise level data analysis. TNI was also determined for analysis of traffic noise on intersections of roads. Equivalent noise levels were transferred into the Geographic Information System (GIS) and spatial analysis tool was used to create spatial and strategic noise maps. Based on the maps, it is revealed that noise levels are exceeded all over the city with respect to ambient noise standards. It was experienced that intersections of roads during peak rush time are very noisy due to honking. The study recommends the noise monitoring through cycle-mounted sound level meter since it covers unapproachable sites, more coverage in the city that helps in identifying hotspot area of concern for noise abatement strategies and planning.