Fish are important in constructed wetland (CW) ecosystem. An 80-day experiment was conducted by exposing juvenile grass carp (Ctenopharyngodon idellus) to 0, 0.5, 2.0, 4.5, 9.0, and 18.0 mg L⁻¹ total ammonia nitrogen (TAN) stress to determine the severity of physiological changes in fish organs (liver, gills, and muscle) in CW. Specific growth rate results indicated that low TAN (≤ 2.0 mg L⁻¹) help maintain or enhance grass carp growth. Fish physiological indexes did not significantly change during exposure, except for the gill’s reactive oxygen species (ROS) level that is susceptible to TAN exposure. Under high TAN (≥ 4.5 mg L⁻¹), physiological changes and organ-specific responses were revealed. The ROS and malondialdehyde levels were higher in the gills than in the liver. At 9.0 mg L⁻¹ TAN, the muscle cells manifested toxicity. The antioxidant system of different organs responded differently because the gills were more susceptible to low TAN than other organs. After TAN removal from the low TAN system, the antioxidative enzymes and antioxidants were increased to scavenge extra ROS and reverted to the normal level. However, grass carp cannot recover from the oxidative damage at ≥ 9.0 mg L⁻¹ external TAN, resulting in organ dysfunction and failed ROS scavenging. This study provides information in maintaining CW sustainability.

This study assessed the contaminant removal potential of a low-cost alum synthesized from bauxite slime waste compared to industrial grade alum [Al₂(SO₄)₃.18H₂O] in treating car wash wastewater using standard jar tests. The synthesized alum was subsequently applied as a coagulant to test the short-term performance of a bench scale flocculation–flotation system for treating car wash wastewater. Coagulant dosages and mixing intensities were optimized for both coagulants and differences were analyzed with R using two-way ANOVA with Tukey’s (HSD) post hoc testing. Per the jar tests, percentage removal of up to 99%, 34%, and 75% of turbidity, anionic surfactants (AS), and COD, respectively, was achieved with 90 mg/L of the synthesized alum compared to 100%, 37%, and 74% for industrial grade alum. Contaminant removal efficiencies of both coagulants were comparable (p > 0.05). However, coagulant dosage strongly influenced the removal of turbidity, AS, and COD (p < 0.05) while mixing intensity influenced all but COD. The bench-scale flocculation–flotation system completely removed turbidity (100%) and reduced AS and COD by up to 92% and 99% respectively. The results of this study demonstrate the potential of alum synthesized from bauxite slime waste as a cheaper alternative for industrial grade alum in wastewater recycling for the car wash industry.

The removal of three over-the-counter pharmaceuticals from aqueous solution using four different adsorbents was analyzed. To study the effect of infused pharmaceutical and adsorbent on the adsorption system, both the concentration of drug and adsorbent dosage were varied, with constant temperature and pressure at different contact time. Adsorption kinetics, isotherm models, and ANOVA allegorized a generic trend for pharmaceutical removal efficiency of the adsorbents that varied as follows: activated carbon > fly ash > bentonite > sugar cane bagasse ash. The Tempkin model appears to fit the isotherm data better than Freundlich and Langmuir. Correspondingly, the kinetic studies implied a pseudo-second-order fit, to understand the mechanism by which the solute accumulates on the surface of a solid and gets adsorbed to the surface via intra-particle diffusion. Furthermore, some special cases of removal tendencies were noted based on sorbate-sorbent interaction. Effectively, it was observed that at an adsorbent loading of 2 g and initial concentration of 0.2 mmol L⁻¹, bentonite, fly ash, and activated carbon were able to strip more than 80% of all pharmaceuticals from urine. A framework for the highest significance of the experiments was obtained using response surface methodology by the combination of ciprofloxacin-bentonite followed by paracetamol-activated carbon and ibuprofen-activated carbon. Quasi-Newton and Bayesian regression methods were implemented on Langmuir isotherm by designing the neural network for the batch adsorption experiments. Based on the numerical calculations and graphical representations, the proposed model leads to the result that error is minimized and the values are optimized for different pharmaceuticals such as paracetamol, ibuprofen, ciprofloxacin that can be removed from wastewater streams by locally available adsorbents. Graphical abstract

This study intends to examine the impact of ICTs (i.e., internet usage and mobile cellular subscriptions), globalization, electricity consumption, financial development, and economic growth on environmental quality by using 1994–2014 panel data of BRICS economies. This study employed a second-generation panel unit root test accounting for the presence of cross-sectional dependence and indicated that carbon dioxide emissions, electricity consumption, financial development, internet usage, mobile usage, globalization, and economic growth have integration of order one. The results from Westerlund panel co-integration test confirms that the variables are co-integrated and revealed that ICT-finance-globalization-electricity-GDP-CO₂ nexus has long-run equilibrium relationship. The results from dynamic seemingly unrelated regression (DSUR) indicate that internet usage and mobile cellular subscriptions (ICTs) have significant, adverse impact on carbon dioxide emissions. To put it simply, ICT positively contributes towards environmental quality. Similarly, economic growth also has an adverse effect on carbon dioxide emissions. On the other hand, electricity consumption, globalization, and financial development have a significant positive effect on carbon emissions. In addition, Granger causality test results show the presence of a bidirectional causal relationship between internet usage and environmental quality, financial development and electricity consumption, ICT and financial development, mobile cellular subscription and globalization, economic growth and environmental quality, and internet usage and economic growth. A unidirectional causal link is detected running from mobile cellular subscriptions towards environmental quality, ICT towards electricity consumption, financial development towards environmental quality, globalization towards environmental quality, and globalization towards economic growth. Moreover, time series analysis has also been done in this study to analyze the findings for each of BRICS countries which are directed towards important policy implications. For instance, ICT policy can play an integral part in improving environmental quality policy.

The indoor air quality issue and its potential health problems are attracting increasingly attentions. In this study, micro-orifice uniform deposit impactor (MOUDI) was used to sample suspended particles from four typical indoor environments, including residence, office, cyber classroom, and chemical analysis room. Size-dependent concentrations of perfluoroalkyl substances (PFASs) and heavy metals in suspended particles were analyzed. Then, the International Commission on Radiological Protection deposition model was employed to estimate deposition efficiencies and fluxes of size-fractioned PFASs and heavy metals in the human respiratory tract. Most of the contaminants deposited in head airways, where coarse particles (aerodynamic diameter or Dp > 1.8 μm) contributed the most. By contrast, in the alveolar region fine particles (Dp < 1.8 μm) were dominant. The chronic daily intake through inhalation of PFASs and heavy metals via airborne particles were 10.3-37.5 pg kg⁻¹days⁻¹ and 3.1-25.9 mg kg⁻¹days⁻¹, respectively. The estimated total hazardous quotient of PFASs and heavy metals were 4.4 × 10⁻⁵-1.7 × 10⁻³ and 9.9 × 10⁻³-1.05 × 10⁻¹, which is far lower than the acceptable threshold of 1. However, the incremental lifetime cancer risk induced by As, Cd, Co, Cr, and Ni were estimated to be 1.11 × 10⁻⁵-1.41 × 10⁻⁴ in total, which exceeded the acceptable threshold of 10⁻⁶. These findings implicate that there were health risks, especially cancer risks caused by heavy metals associated with airborne particles in urban indoor environments.

The biochar which was characterized with well-developed facial structure and O-/N-containing functional groups could effectively remove Cd (II) from water. In this paper, Typha orientalis–based biochar (BCS) with well-developed N containing functional groups was modified with shrimp bran which was rich in crude protein for the first time. There are more well-developed O-/N-containing functional groups in the structure of BCS than that of pure Typha orientalis–based biochar without any modification (BC), and this conclusion was depended on their comparisons of Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), elemental analysis (EA), Boehm titration, Fourier transform infrared (FTIR), and other characterization techniques. Moreover, according to the experiment, the phenomenon that the adsorption capacity of Cd(II) on these two adsorbents (BCs) decreased with the increase of solution ionic strength could be carried out. The Cd(II) adsorption studies combined with X-ray photoelectron spectroscopy (XPS) analysis revealed that the adsorption mechanism was mainly attributed to physical microporous filtration and chemical interaction between Cd(II) and the surface functional groups (surface complexation, ion exchange, and electrostatic attraction).

In this study, we have investigated UV-B-induced alterations including chloroplast ultrastructure, chlorophyll fluorescence parameters, physiological metabolism, and chloroplast proteome profile. Comparison of seedling phenotypic characterization and physiological status revealed that the low level of 1.08 KJ m⁻² of UV-B irradiation had no obvious effects on seedling phenotype and growth and maintained better chloroplast ultrastructure and higher photosynthetic efficiency. Nevertheless, the high dose of 12.6 KJ m⁻² of UV-B stress caused significant inhibitory effects on the growth and development of wheat seedlings. Proteomic analysis of chloroplasts with or without 1.08 KJ m⁻² of UV-B irradiation identified 50 differentially expressed protein spots, of which 35 were further analyzed by MALDI-TOF/TOF mass spectrometry. These proteins were found to be involved in multiple cellular metabolic processes including ATP synthesis, light reaction, Calvin cycle, detoxifying and antioxidant reactions, protein metabolism, malate and tetrapyrrole biosynthesis, and signal transduction pathway. We also identified 3 novel UV-B-responsive proteins, spots 8801, 8802, and 9201, and predicted three new proteins might be UV-B protective proteins. Our results imply chloroplasts play a central protective role in UV-B resistance of wheat seedlings and also provide novel evidences that UV-B stress directly affects on the structure and function of chloroplasts and explore molecular mechanisms associated with plant UV-B tolerance from chloroplast perspective.

A magnesia–pullulan (MgOP) composite has been developed to remove phosphate from a synthetic solution. In the present study, the removal of phosphate by MgOP was evaluated in both a batch and dynamic system. The batch experiments investigated the initial pH effect on the phosphate removal efficiency from pH 3 to 12 and the effect of co-existing anions. In addition, the adsorption isotherms, thermodynamics, and kinetics were also investigated. The results from the batch experiments indicate that MgOP has encouraging performance for the adsorption of phosphate, while the initial pH value (3–12) had a negligible influence on the phosphate removal efficiency. Analysis of the adsorption thermodynamics demonstrated that the phosphate removal process was endothermic and spontaneous. Investigations into the dynamics of the phosphate removal process were carried out using a fixed bed of MgOP, and the resulting breakthrough curves were used to describe the column phosphate adsorption process at various bed masses, volumetric flow rates, influent phosphate concentrations, reaction temperatures, and inlet pH values. The results suggest that the adsorption of phosphate on MgOP was improved using an increased bed mass, while the reaction temperature did not significantly affect the performance of the MgOP bed during the phosphate removal process. Furthermore, higher influent phosphate concentrations were beneficial towards increasing the column adsorption capacity for phosphate. Several mathematic models, including the Adams–Bohart, Wolboska, Yoon–Nelson, and Thomas models, were employed to fit the fixed-bed data. In addition, the effluent concentration of magnesium ions was measured and the regeneration of MgOP investigated.

The low-low temperature electrostatic precipitator (LLT-ESP), a combination of a traditional temperature electrostatic precipitator (ESP) and a non-leakage media gas-gas exchange (MGGH), could reduce the inlet flue gas temperature below the dew point and improved the performance of the ESP. Particulate matter (PM) from the stationary sources contains filterable particulate matter (FPM) and condensable particulate matter (CPM). In this study, coal with a high ash content (coal-HA) was burned, and the emission characteristics and removal efficiencies of the particulate matter in an LLT-ESP were investigated. The standards used to test filterable and condensable PM were ISO standard 23210-2009 and U.S. EPA Method 202, respectively. The LLT-ESP was efficient in removing filterable PM, with a total filterable PM removal efficiency as high as 99.6%. The removal efficiency of filterable PM increased with increasing particulate size and decreasing imported flue gas temperature. The LLT-ESP also provided excellent removal of condensable PM with a condensable PM removal efficiency exceeding 77%. Upstream of the LLT-ESP, the concentrations of filterable PM were much higher than those of condensable PM. Downstream of the LLT-ESP, the relationship between the quantities of condensable and filterable PM reversed. To reduce the emissions of PM from coal-fired power plants, more attention should be paid to controlling condensable PM. The temperature of the flue gas upstream of the LLT-ESP played an important role in eliminating condensable PM. At lower imported flue gas temperature operation conditions, the removal efficiency of the LLT-ESP for the condensable PM and the escaping mass concentration of condensable PM increased. Among the organic fraction of the condensable PM, hydrocarbons and esters were dominant. Meanwhile, SO₄²⁻ was the primary component, followed by Cl⁻ in anions. Na⁺, Ca²⁺, and Fe³⁺ were the main components in metal ions. Particles with diameters ≥ 10 μm, which contained most of the Si and Al, were dominant in the fly ash collected from sections 1 and 2 of the LLT-ESP. The main particles in sections 3 and 4 were PM₁₀, which contained the highest concentrations of Ca and Fe.