The aim of this study was to improve the ethanol production from pomegranate peels (PPs). Therefore, the effect of enzymatic hydrolysis and different pretreatments on ethanol production by yeasts was examined. There were three different enzyme concentrations (3.6, 7.2, 14.4 FPU/g substrate) tested for enzymatic hydrolysis, and four different PP media, such as WSPP (whole slurry of PP), LFPP (liquid fraction of PP), WSFPP (washed solid fraction of PP) and N-WSFPP (non-washed solid fraction of PP), were prepared. Bioethanol production was monitored for 96 h. Maximum ethanol concentrations were obtained at WSPP medium as 12.69 g/L, 14.35 g/L and 4.23 g/L in Saccharomyces cerevisiae, Kluyveromyces marxianus and Pichia stipitis, respectively. On the other hand, the washing step of biomass increased the kinetic parameters dramatically and the highest theoretical ethanol yields and YP/S values were obtained from WSFPP medium in all tested yeasts. Theoretical ethanol yields were 97.8%, 98.7% and 35.5% for S. cerevisiae, K. marxianus and P. stipitis, respectively. Qₚ values were observed as 0.98 g/L h, 0.99 g/L h and 0.04 g/L h for the same yeasts. The highest YP/S values were detected as 0.50 g/g for S. cerevisiae, 0.50 g/g for K. marxianus and 0.30 g/g for P. stipitis in the washed pomegranate peel biomass.

Carbon nano-onions (CNOs), metal–organic frameworks (MOF-199), and carbon nano-onion embedded metal–organic frameworks (CMOF-199) were synthesized from garlic peels as a green source of carbon atoms while MOF-199 was prepared by solvothermal interaction between 1,3,5-benzenetricarboxylic acid and copper nitrate trihydrate. All the prepared solid materials were characterized by nitrogen adsorption/desorption isotherm, transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), X-ray diffraction (XRD), thermogravimetric analysis (TGA), point of zero charge (pHPZC), and Fourier transform infrared spectroscopy (FTIR). Adsorption of cadmium ions from aqueous solution was investigated onto all prepared solid materials considering different application conditions such as adsorbent dosage, pH, contact time, initial concentration of Cd⁺², and temperature. Adsorption of Cd⁺² was investigated by Langmuir, Freundlich, Temkin, and Dubinin–Radhushkevich adsorption isotherm models. Maximum adsorption capacity (113.3 mg g⁻¹) was achieved by CMOF-199 at 40 °C. The adsorption of Cd⁺² obeys pseudo-second-order kinetic model. Thermodynamic studies confirmed that the adsorption process is spontaneous, favorable, endothermic, and physisorption. Adsorption results proved that carbon nano-onion embedded metal–organic frameworks are promising solid adsorbents for cadmium ion adsorption.

In this study, hydrothermal carbonization (HTC) of a biomass was used as a means to improve the physicochemical properties of rubber seed shell (RSS) and enhance its reactivity in the char-CO₂ gasification reaction, known as the Boudouard reaction (C + CO₂ ↔ 2CO). Hydrochar samples were developed by hydrothermal treatment of RSS, without separating the solid residue from the liquid product, at 433, 473, 513, and 553 K under autogenous pressure. The CO₂ gasification reactivity of the developed hydrochars was then investigated at different heating rates (5, 10, 20, and 30 K/min) by the non-isothermal thermogravimetric method. The hydrochars revealed higher reactivity and improved gasification characteristics compared to the untreated biomass, while the hydrochar which was filtered from the liquid slurry showed lower reactivity compared to the untreated biomass. This was due to the chemical and structural evolutions of the biomass during hydrothermal treatment as indicated by various analyses. The gasification reactivity of the hydrochar was substantially enhanced by introduction of a catalyst (NaNO₃) during HTC. Kinetic analysis of the char-CO₂ gasification reaction was carried out by applying Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink isoconversional methods, and thermodynamic parameters were also determined. The activation energy of the Na-loaded RSS hydrochar in CO₂ gasification (120–154 kJ/mol) was considerably lower than that of the untreated biomass (153–172 kJ/mol). Thermodynamic studies also confirmed the promoting effect of hydrothermal treatment and catalyst impregnation on enhancement of reactivity of the virgin biomass and reduction of gasification temperature.

The present investigation aims to prepare a hybrid material from Luffa cylindrica and metal oxides (ZnO, Al₂O₃) by precipitation for different percentages of zinc and aluminum (1, 2, and 4%) with a determined amount of biomass (a diameter of 250 μm). Physicochemical characterization of “Luffa cylindrica” and “Luffa cylindrica-metal oxides” was carried out by Boehm titration, pHPZC determination, scanning electron microscopy (SEM), and FTIR spectroscopic analysis. The process was optimized according to the adsorbed amount of methylene blue: MB (cationic dye) and methyl orange: MO (anionic dye) onto Luffa cylindrica and hybrid materials prepared. The results demonstrated the efficiency of the designed hybrid materials in removing MB and MO, accelerating the biosorption process and improving the performance of Luffa cylindrica fibers. The highest quantities adsorbed of dyes were obtained by the hybrid material prepared using 4% ZnO. Finally, the Brouers-Sotolongo mathematical modeling of kinetics was used in order to describe the pollutants retention process.

Employment of biosurfactants and biodegradable chelants could further promote sustainability of soil and groundwater remediation tasks. Biosurfactant (soapnut saponin) and biodegrading chelants (ethylenediamine-N,N′-disuccinic acid (EDDS)) were employed to enhance the phytoextraction by native Taiwanese chenopod (Chenopodium formosanum Koidz.), Napier grass (Pennisetum purpureum) cultivar Taishi No. 4, and soapwort (Saponaria officinalis). Ethylene diamine tetraacetic acid (EDTA) was also employed as the control. Contaminated soils as silty clay loam texture was collected from a defunct rice paddy, containing chromium (Cr), cadium (Cd), and copper (Cu). Addition of both soapnut saponin and EDDS proportionally increased bioaccumulation factors (BCFs) of aboveground biomass for all three plants. Taiwanese chenopod demonstrated the best BCF values among three plants, with BCF increased from 0.76 to 2.6 and 1.3 for Cu under the presence of the highest dosages of EDDS and saponin. Plant aboveground biomass did exhibit negative correlation toward biomass metal concentrations. Presence of saponin did exhibit the least negative slopes among the correlations of all three additives for three plants. Taiwanese chenopod did exhibit the least negative slopes among the correlations of all three additives for three plants. Above observations suggested that saponin may have some protection for plants, especially for Napier grass. Taiwanese chenopod could possess more tolerance toward heavy metals than Napier grass does.

Human health is threatened by significant emissions of heavy metals into the urban environment due to various activities. Various studies describing health risk analyses on soil and dust have been conducted previously. However, there are limited studies that have been carried out regarding the potential health risk assessment of heavy metals in urban road dust of < 63-μm diameter, via incidental ingestion, dermal contact, and inhalation exposure routes by children and adults in developing countries. Therefore, this study evaluated the health risks of heavy metal exposure via ingestion, dermal contact, and inhalation of urban dust particles in Petaling Jaya, Malaysia. Heavy metals such as lead (Pb), chromium (Cr), zinc (Zn), copper (Cu), and manganese (Mn) were measured using dust samples obtained from industrial, high-traffic, commercial, and residential areas by using inductively coupled plasma mass spectrometry (ICP-MS). The principal component and hierarchical cluster analysis showed the dominance of these metal concentrations at sites associated with anthropogenic activities. This was suggestive of industrial, traffic emissions, atmospheric depositions, and wind as the significant contributors towards urban dust contamination in the study sites. Further exploratory analysis underlined Cr, Pb, Cu, and Zn as the most representative metals in the dust samples. In accommodating the uncertainties associated with health risk calculations and simulating the reasonable maximum exposure of these metals, the related health risks were estimated at the 75th and 95th percentiles. Furthermore, assessing the exposure to carcinogenic and non-carcinogenic metals in the dust revealed that ingestion was the primary route of consumption. Children who ingested dust particles in Petaling Jaya could be more vulnerable to carcinogenic and non-carcinogenic risks, but the exposure for both children and adults showed no potential health effects. Therefore, this study serves as an important premise for a review and reformation of the existing environmental quality standards for human health safety.

This study applies augmented mean group (AMG) along with common correlated effect mean group (CCEMG) estimator and panel heterogeneous causality to examine the interrelationship between GDP, energy consumption, financial development, foreign investment, and ecological footprints for five Belt and Road initiative (BRI) regions and in aggregated panel of BRI over the time 1990–2016. Using a multivariate framework, this study examines four alternative and conceivable hypotheses, including Pollution haven hypothesis, environmental Kuznets curve hypothesis, energy push emission hypothesis, and finance push emission hypothesis. The empirical results supported all four hypotheses for the panel of BRI and partially supported the existence of these hypotheses across the regions. Moreover, a variety of causal nexuses has been discussed in the study. Based on these results, the current research has proposed policy implications to combat the ecological footprints of BRI countries and across the regions.

In 2008, the Mulberry River, a National Wild and Scenic River, was listed as impaired due to low pH (below pH 6.0). Over the last 50 years, the volume of conifers in the Ozark region has increased 115% since 1978 which may result in the acidification of nearby aquatic ecosystems. The objective of this study was to determine if differences exist in soil and litter chemical properties between deciduous and coniferous tree stands. Aboveground litter (n = 200) and soil (n = 400) at 0- to 5- and 5- to 15-cm depths were collected at paired deciduous and coniferous stands at 10 locations within the Mulberry River watershed and analyzed for a suite of chemical parameters. There were no differences (P > 0.05) in several measures of soil acidity between deciduous and coniferous stands. Litter collected from the coniferous stands was more acidic than deciduous litter (4.4 vs 4.7; P < 0.05). Cation exchange capacity, exchangeable Ca and Mg, and water-soluble P and Mg contents differed (P < 0.05) by stand and depth. Cation exchange capacity and exchangeable Ca and Mg were greatest in the 0- to 5-cm depth interval of the coniferous stands. Water-soluble P and Mg contents were greatest within the 0- to 5-cm depth interval which did not differ (P > 0.05) between stand but were greater than the 5- to 15-cm depth interval. Although limited to the top 15-cm of soil, the similarity in soil acidity between stands suggests that conifer growth may not be a substantial source of acidity to the Mulberry River.

As secondary batteries are becoming the popular production of industry, especial for lithium ion batteries (LIBs), the degree of environmental friendliness will gather increasing attention to their products of the whole life cycle. The research combines the life cycle assessment (LCA) and footprint family definition to establish a framework to calculate the footprint family of secondary battery materials. Through the method, we calculated the values of carbon footprint, water footprint, and ecological footprint about this eight kinds of secondary cathode battery materials with Ni-MH, Li₁.₂Ni₀.₂Mn₀.₆O₂/C, LiNi₁/₃Co₁/₃Mn₁/₃O₂/C, LiNi₀.₈Co₀.₂O₂/C, LiFePO₄/C, LiFe₀.₉₈Mn₀.₀₂PO₄/C, FeF₃(H₂O)₃/C, and NaFePO₄/C. When comparing and analyzing their values in each footprint, it can summarize the evaluation method for some secondary batteries by footprint indicators and construct the evaluation system. Through the comprehensive evaluation of footprint family system, the NaFePO₄/C battery gets the best performance of three main footprints when combining 1 kg of cathode materials, while Ni-MH is opposite. Hence, among these eight batteries environmental impacts evaluation, the NaFePO₄/C battery is regarded as the superior “green” battery, albeit the current application is restricted because of the synthesis limitation on large scale and energy density of storage. In LIBs comparison, the FeF₃(H₂O)₃ material shows its characteristics of environmental friendliness, which is expected to be a greener battery material of LIB. In conventional LIBs, the iron-containing cathode materials show lower environmental burden than ternary cathode materials. We can reduce environmental impacts through developing new advanced materials and reducing the content of high sensitivity element in raw materials.

The manuscript illustrates the ameliorative effects of exogenously applied higher polyamine (PA), spermidine (Spd) in the susceptible indica rice cultivar IR-64 subjected to prolonged fluoride stress. The Spd treatment drastically reduced fluoride bioaccumulation by restricting entry of the anions through chloride channels and enabled better maintenance of the proton gradient via accumulation of P-H⁺/ATPase, thereby improving the root and shoot lengths, fresh and dry weights, RWC, chlorophyll content and activities of pyruvate dehydrogenase (PyrDH), α-amylase, and nitrate reductase (NR) in the Spd-treated, stressed plants. Expression of RuBisCo, PyrDH, α-amylase, and NR was stimulated. Spd supplementation reduced the molecular damage indices like malondialdehyde, lipoxygenase, protease activity, electrolyte leakage, protein carbonylation, H₂O₂, and methylglyoxal (detoxified by glyoxalase II). Mitigation of oxidative damage was facilitated by the accumulation and utilization of proline, glycine-betaine, total amino acids, higher PAs, anthocyanin, flavonoids, β-carotene, xanthophyll, and phenolics as verified from the expression of genes like P5CS, BADH1, SAMDC, SPDS, SPMS, DAO, PAO, and PAL. Spd treatment activated the ascorbate-glutathione cycle in the stressed seedlings. Expression and activities of enzymatic antioxidants showed that GPOX, APX, GPX, and GST were the chief ROS scavengers. Exogenous Spd promoted ABA accumulation by upregulating NCED3 and suppressing ABA8ox1 expression. ABA-dependent osmotic stress-responsive genes like Osem, WRKY71, and TRAB1 as well as ABA-independent transcription factor encoding gene DREB2A were induced by Spd. Thus, Spd treatment ameliorated fluoride-mediated injuries in IR-64 by restricting fluoride uptake, refining the defense machinery and activating the ABA-dependent as well as ABA-independent stress-responsive genes.