The increase in biodiesel production has been leading to an excess amount of crude glycerol and, consequently, serious environmental issues. For this reason, electrospun chitosan-based nanofibers (CB-EN), composed by chitosan and poly(ethylene oxide) (PEO), were synthesized to apply in the biosorption of impurities from industrial glycerol. To evaluate the biosorption efficiency, the chitosan-based nanofiber was compared to other chitosan-based biosorbents (chitosan biopolymeric film and chitosan powder). The equilibrium and thermodynamic studies were successfully performed to comprehend the interaction mechanisms through the biosorption of glycerol pigments onto electrospun chitosan-based nanofibers. The temperature effect was evaluated by experimental equilibrium curves. Freundlich and BET models were used to estimate isotherm parameters. Gibbs free energy change, enthalpy change, entropy change, and isosteric heat of biosorption were quantified. The equilibrium curves showed that the highest equilibrium relative adsorption (340.7 g⁻¹) was reached at 60 °C. The BET model was the most suitable to represent the equilibrium behavior. The thermodynamic parameters indicated that the biosorption was spontaneous, exothermic, random, and energetic heterogeneous. Therefore, this work developed a green and efficient alternative to refine industrial glycerol. Graphical abstract Note: This data is mandatory. Please provide

Several parts of the world have been facing the problem of nitrite and nitrate contamination in ground and surface water. The acute toxicity of nitrite has been shown to be 10-fold higher than that of nitrate. In the present study, aminated silica carbon nanotube (ASCNT) was synthesised and tested for nitrite removal. The synergistic effects rendered by both amine and silica in ASCNT have significantly improved the nitrite removal efficiency. The IEP increased from 2.91 for pristine carbon nanotube (CNT) to 8.15 for ASCNT, and the surface area also increased from 178.86 to 548.21 m² g⁻¹. These properties have promoted ASCNT a novel adsorbent to remove nitrite. At optimum conditions of 700 ppm of nitrite concentration at pH 7 and 5 h of contact with 15 mg of adsorbent, the ASCNT achieved the maximal loading capacity of 396 mg/g (85% nitrite removal). The removal data of nitrite onto ASCNT fitted the Langmuir isotherm model better than the Freundlich isotherm model with the highest regression value of 0.98415, and also, the nonlinear analysis of kinetics data showed that the removal of nitrite followed pseudo-second-order kinetic. The positive values of both ΔS° and ΔH° suggested an endothermic reaction and an increase in randomness at the solid–liquid interface. The negative ΔG° values indicated a spontaneous adsorption process. The ASCNT was characterised using FESEM–EDX and FTIR, and the results obtained confirmed the removal of nitrite. Based on the findings, ASCNT can be considered as a novel and promising candidate for the removal of nitrite ions from wastewater.

Nitrate pollution in water is a common environmental problem worldwide. The Qinhe Basin (QHB) faces with the risk of eutrophication. To clarify nitrate pollution of river water, water chemical data, water isotope values (δD and δ¹⁸O–H₂O), and dual nitrate isotope values (δ¹⁵N–NO₃⁻ and δ¹⁸O–NO₃⁻) were used to discern sources and transformation mechanisms of nitrogen in the QHB. The nitrate concentrations of river water ranged from 0.71 to 20.81 mg L⁻¹. The δD and δ¹⁸O–H₂O values of river water varied from − 74 to −52‰ and from − 10.8 to − 7.2‰, with an average value of − 60‰ and − 8.2‰, respectively. The δ¹⁵N–NO₃⁻ and δ¹⁸O–NO₃⁻ values of nitrate ranged from − 6.7 to + 14.8‰ and from − 6.0 to + 5.6‰, with a mean value of + 4.6‰ and − 0.6‰, respectively. Assimilation by algae and the mixing of soil nitrogen, chemical fertilizer, sewage, and industrial wastewater could account for increasing δ¹⁵N–NO₃⁻ values. There was neither significantly positive nor negative correlation between δ¹⁵N–NO₃⁻ and δ¹⁸O–NO₃⁻ in river water, indicating that no obvious denitrification shifted isotopic values of nitrate in the QHB. Based on the dual isotopic values of nitrate and land use change in the watershed, it could be concluded that intensive nitrification dominated in the QHB, and dissolved nitrate was mainly derived from nitrification of ammonium in fertilizer, soil nitrogen, and domestic sewage. As the primary nitrate sources identified in the QHB, effective fertilization and afforestation can be taken to protect water resource from nitrate pollution.

Three transects were established along the southwestern coast of Taiwan; transects from north to south were respectively extended from the Kaohsiung Harbor, Kaoping River estuary, and Fangshan River estuary. Six metals including Pb, Cd, Cr, Cu, Zn, and Ni were analyzed in the zooplankton and seawater samples. A total of 24 groups of zooplankton were identified. Calanoid was the frequently collected group and accounted for greater than 40% of the relative abundance of zooplankton. Results showed that metal concentrations in seawater close to coast were higher than those in the outside of transect. The mean of metal concentrations in zooplankton followed the hierarchy: Zn > Cu > Pb > Ni > Cr > Cd. On the whole, metal concentrations in zooplankton from sampling sites in the coastal region were observed to be higher than those in the offshore region. The bioconcentration factor of zooplankton ranged within 10³–10⁵ for all studied metals and indicated that zooplankton in the seawater of southwestern Taiwan can accumulate metal even at background concentrations of metals. The value of diversity indices exhibited an increase in the distance to the coast, whereas the abundance showed no significant correlation with that. Consequently, the lowest mean abundance of zooplankton and the highest average metal bioaccumulation were found in transect outside Kaohsiung Harbor, representing that Kaohsiung Harbor has the contamination of anthropogenic metals that results in the impact on zooplankton.

In this work, synergistic effect of solar photocatalysis integrated with adsorption process towards the degradation of Congo red (CR) was investigated via two different approaches using a photocatalytic membrane reactor. In the first approach, sequential treatments were conducted through the adsorption by graphene oxide (GO) and then followed by photocatalytic oxidation using Fe-doped ZnO nanocomposites (NCs). In the second approach, however, CR solution was treated by photocatalytic oxidation using Fe-doped ZnO/rGO NCs. These nanocomposites were synthesized by a sol-gel method. The NCs were characterized by X-ray diffraction (XRD), photoluminescence (PL), Fourier transmission infrared (FTIR), ultraviolet–visible (UV-vis) spectroscopy, and field emission scanning electron microscopy (FESEM). It was observed that Fe-doped ZnO could enhance the photoactivity of ZnO under solar light. When Fe-doped ZnO were decorated on GO sheets, however, this provided a surface enhancement for adsorption of organic pollutants. The photocatalytic performances using both approaches were evaluated based on the degradation of CR molecules in aqueous solution under solar irradiation. Nanofiltration (NF) performance in terms of CR residual removal from water and their fouling behavior during post-separation of photocatalysts was studied. Serious flux declined and thicker fouling layer on membrane were found in photocatalytic membrane reactor using Fe-doped ZnO/rGO NCs which could be attributed to the stronger π–π interaction between rGO and CR solution.

Three new anticoagulant rodenticides R₁, R₂, and R₃ were designed. The containing fluorine acute toxicity groups was added to 1,3-indandione derivative. Analysis method of synthesized anticoagulant rodenticides were IR, ¹H NMR. Acute bioactivity of the new rodenticides was evaluated, including the coefficient of absorb food and median lethal dose (LD₅₀). Average coefficient of absorbed food for R₁ was 0.54 and LD₅₀ of R₁ was 2.15 mg/kg. Average coefficient of absorbed food for R₂ was 0.59 and the acute oral LD₅₀ of R₂ was 2.65 mg/kg. Average feeding coefficient of R₃ was 0.68 and the acute oral LD₅₀ of R₃ was 3.12 mg/kg. Experiments showed that rat’s death peak was at about 72 h and rodenticides had good characteristics of acute medicine. The LD₅₀ of three new fluoride anticoagulant rodenticides showed that they had good palatability for big white rats, and they had a strong poison effect on rodent. The result of all experiments proved that the synthesis of 1,3-indan diketone used as parent compound of new anticoagulant rodenticides could replace the current 4-hydroxyl coumarin as parent compound of the second-generation anticoagulant rodenticides. 1,3-Indan diketone would be widely used as parent compound of anticoagulant rodenticides.

The occurrence, seasonal variation and emission of nine widely used phosphorus flame retardants (PFRs) were investigated in a wastewater treatment plant (WWTP) located in Guangzhou, China, over 1 year. Results showed that PFRs were widely detected in wastewater and sewage sludge. Tris(2-chloroisopropyl) phosphate (TCIPP) was the most dominant PFRs in influent, effluent, and sludge. Significant seasonal variation of total PFRs in the influent was observed (p < 0.05). However, no significant seasonal variation found in chlorinated and alkyl PFRs. The emission of PFRs was comparable with the previously reported values of decabromodiphenyl ether in WWTPs. Risk quotient for PFRs showed low eco-toxicity risk in effluent for aquatic organisms. Since the removal efficiency of total PFRs was less than 30% and the use of PFRs had been increasing, continuous monitoring of the environmental impact on the receiving water is still needed.

The Juarez Valley is an important agricultural region in northern Mexico, conveniently organized into three modules (I to III). For decades, their soils have been exposed to organochlorine pesticides (OCPs) and also have been irrigated with wastewaters, which may contain heavy metals. Nowadays, there is very limited information regarding the presence of OCPs and heavy metals in these soils. Thus, the aim of this study was to diagnose these soils for OCPs and heavy metal content by using gas chromatography coupled with electron micro-capture detector and atomic absorption spectrometry, respectively. The results indicated that 4,4′-dichlorodiphenyldichloroethylene and 4,4′-dichlorodiphenyltrichloroethane were primarily disseminated across the three modules since they were found in 100% and 97% of the analyzed soils, respectively. According to international regulations, none of the determined OCP concentrations are out of the limits. Additionally, the Cu, Zn, Fe, Pb, and Mn were found in all sampled soils from the three modules. The highest concentration of Fe was found in module II (1902.7 ± 332.2 mg kg⁻¹), followed by Mn in module III (392.43 ± 74.43 mg kg⁻¹), Zn in module I (38.36 ± 26.57 mg kg⁻¹), Pb in module II (23.48 ± 6.48 mg kg⁻¹), and Cu in module I (11.04 ± 3.83 mg kg⁻¹) (p ≤ 0.05). These values did not exceed the limits proposed by international standards. The Cd was detected in most of the analyzed soils and all their values, with an average of 2 mg kg⁻¹, surpassed the Mexican standards (0.35 mg kg⁻¹). This study has mapped the main OCPs and heavy metals in the Juarez Valley and can serve as a starting point to further monitor the behave of xenobiotics. Since these recalcitrant compounds might be bio-accumulated in biological systems, further analytical methods, as well as remediation techniques, should be developed.

In order to explore the effects of combined traffic noise (CTN) on learning and memory function, young Sprague-Dawley (SD) rats were exposed to CTN from highway and high-speed railway for 52 days, whose day-night equivalent continuous A-weighted sound pressure level (Ldₙ) was 70 dB(A) (corresponding sound pressure level was 80 dB). The synaptic ultrastructure and the expressions of phosphorylated calcium/calmodulin-dependent protein kinase II (p-CaMKII) and N-methyl-D-aspartate receptor 1 (NMDAR1 or NR1) in the hippocampus were tested by transmission electron microscopy (TEM) and Western blot, respectively. Results showed that there was no significant difference in the synaptic ultrastructure and the expressions of p-CaMKII and NR1 in the hippocampus of young rats between the experimental group and control group. Compared with single high-speed railway noise (HSRN) with Ldₙ of 70 dB(A), CTN had less influences on learning and memory function, which was closely related to smaller intermittency of CTN and less anxiety caused by CTN. In comparison with white noise with a sound pressure level of 80 dB, CTN had less impacts on learning and memory function, which was mainly associated with CTN’s smaller R-weighted sound pressure level based on rats’ auditory sensitivity.

To effectively remove phosphate pollution and convectively reuse phosphate resource, straw biochar was firstly functionalized with lanthanum ferrite (LaFeO₃) via four different methods, including one-step co-precipitation (S-C), two-step co-precipitation (B-C), one-step impregnation (S-E), and two-step impregnation (B-E). LaFeO₃/biochar was characterized systematically by a series of characterization methods. The influence of preparation methods, operation conditions on adsorption process, and the regenerability were studied. The products prepared by four methods displayed different physical morphology and chemical analysis proved chemical composition were similar. LaFeO₃/biochar exhibited high adsorption capacity, the pseudo-second-order and Sips models were fitted for the adsorption equilibrium. The LaFeO₃/biochar exhibited outstanding phosphate adsorption performance with pH values ranging from 2.3 to 10.6; La ions release was similarly negligible, when pH value was higher than 5.27. The adsorption mechanism was studied and inferred that La species is the key to adsorption ability. The results obtained provide better understanding of the adsorption phenomena and indicate the available preparation technologies and potential usefulness of LaFeO₃/biochar for removing phosphate pollution. Graphical abstract “.”