In this study, the optimum design of the entrance of a fishpond laterally to the main flow of an open channel was investigated numerically and experimentally. The flow characteristic measurements were realized with the PIV (particle image velocimetry) method. The mathematical simulations were based on the development of a two dimensional -mean in depthhydrodynamic model and a quasi three dimensional sediment transport model which includes processes of advection, diffusion, and settling of conservative suspended matter. The study was completed with the comparison of the final results of the mathematical models with the findings of the physical model revealing the hydrodynamic interaction and coupling between the main flow of the channel and the lateral reservoir—fishpond and leading to the optimum technical design of the system.

Pulse inputs of heavy metals are expected to increase with a higher frequency of extreme climate events (heavy rain), leading to stronger erosion of contaminated and fertilized farmland soils to freshwaters, with potentially adverse effects on lake ecosystems. We conducted a 5-month mesocosm study to elucidate the responses of the submerged macrophyte Vallisneria spinulosa and phytoplankton to four different doses of cadmium (Cd): 0 (control), 0.05, 0.5, and 5 g m⁻² (CK, I, II, and III, respectively) under mesotrophic conditions. We found that total phosphorus concentrations were larger in the three Cd pulse treatments, whereas total nitrogen concentrations did not differ among the four treatments. The contents of chlorophyll a and soluble sugar in macrophyte leaves decreased in III, and total biomass, ramet number, plant height, and total stolon length of macrophytes were lower in both II and III. In contrast, abundances of the three main phytoplankton taxa—Cyanophyta, Chlorophyta, and Bacillariophyta—did not differ among treatments. Total phytoplankton biomass was, however, marginally lower in CK than in the Cd treatments. We conclude that exposure to strong Cd pulses led to significantly reduced growth of macrophytes, while no obvious effect appeared for phytoplankton.

The problem of producing strong greenhouse gas of nitrous oxide (N₂O) from biological nitrogen removal (BNR) process in wastewater treatment plants (WWTP) has elicited great concern from various sectors. In this study, three laboratory-scale wastewater treatment systems, with influent C/N ratios of 3.4, 5.4, and 7.5, were set up to study the effect of influent C/N ratio on N₂O generation in anaerobic/anoxic/oxic (A²O) process. Results showed, with the increased influent C/N ratio, N₂O generation from both nitrification and denitrification process was decreased, and the N₂O-N conversion ratio of the process was obviously reduced from 2.23 to 0.05%. Nitrification rate in oxic section was reduced, while denitrification rate in anaerobic and anoxic section was elevated and the removal efficiency of COD, NH₄ ⁺-N, TN, and TP was enhanced in different extent. As the C/N ratio increased from 3.4 to 7.5, activities of three key denitrifying enzymes of nitrate reductase, nitrite reductase, and nitrous oxide reductase were increased. Moreover, microorganism analysis indicated that the relative abundance of ammonium-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) were positively correlated with N₂O generation, which was reduced from (8.42 ± 3.65) to (3.61 ± 1.66)% and (10.38 ± 4.12) to (4.67 ± 1.62)%, respectively. NosZ gene copy numbers of the A²O system were increased from (1.19 ± 0.49) × 10⁷ to (2.84 ± 0.54) × 10⁸ copies/g MLSS with the influent C/N ratio elevated from 3.4 to 7.5. Hence, appropriate influent C/N condition of A²O process could optimize the microbial community structure that simultaneously improve treatment efficiency and decrease the N₂O generation.

Heat waves threaten human health given the fast changing climatic scenarios in the recent past. Adaptation to heat waves would take place when people perceive their impacts based on their knowledge. The present study examines perception level and its determinants resulting in adaptation to heat waves in Pakistan. The study used cross-sectional data from urban and peri-urban respondents of Faisalabad District. The study employs a health belief model to assess risk perception among the respondents. Logistic model is used to determine factors affecting level of knowledge, perception and adaptation to heat waves. Around 30% of peri-urban respondents have a low level of knowledge about the fatal impacts of heat waves. Risk perception of heat waves is very low among urban (57%) and peri-urban (66%) respondents. Households’ knowledge on heat waves is significantly related to age, gender, education, wealth and access to health services. Determinants of perception include knowledge of heat waves, age and joint effect of marital status and knowledge while income level, family size, urban/peri-urban background, perceived barriers, perceived benefits and cues to action significantly affect adaptation to heat waves. To reduce deadly health impacts, mass awareness campaigns are needed to build perception and improve adaptation to heat waves.

The effect of dissolved organic matter (DOM) and oil on the removal of the water-soluble compounds benzene, toluene, ethylbenzene, and xylene isomers (BTEX) by two low-cost biosorbents Macrocystis pyrifera and Ulva expansa) was evaluated. DOM decreased the adsorption capacity of toluene, ethylbenzene, and xylenes of the two biosorbents. In contrast, the removal of benzene increased under the same conditions in single and multi-solute systems: this effect was dominant in U. expansa biomass treatments. In the presence of DOM and oil in solutions, the removal of BTEX notoriously increased, being oil that contributed the most. Solubility and hydrophobicity of pollutants played a key role in the adsorption process. The attractions between BTEX molecules and biosorbents were governed by π–π and hydrophobic interactions. Affinities of biosorbents for BTEX were mainly in the order of X > E > T > B. The Langmuir and Sips equations adjusted the adsorption isotherms for BTEX biosorption in deionized and natural water samples, but in the case of oily systems, the Freundlich equation seemed to have a better fit. The biosorption processes followed a pseudo-second-order rate in all the cases.

Municipal solid waste (MSW) containing harmful substances is a major concern in waste management and can cause adverse effects on diversity of fungi in soil. The main objective was to evaluate the fungal diversity inhabiting in the soil nearby MSW disposal site. The fungal strains were isolated in potato dextrose agar (PDA), media at temperatures 28 ± 1 °C by using standard serial dilution pour plate method, and appeared fungal colonies identified based on morphological characteristics. The overall most fungal diversity was found in soil sample collected from S5, followed by S4, S3, S1, and least in S2 site. A total of 24 fungal isolates recovered from the different MSW sites and Aspergillus sp., Fusarium sp., and Curvularia sp. genus has isolated from all the samples. In addition, the metal tolerance index performed because it needs to classify the fungus for their best use as potential agent for environmental protection. The metal tolerance outcomes revealed that both metals (cadmium and chromium) has appeared as the highest growth inhibitor for most strains and even fungal colonies did not propagate very well on the surface of media. Therefore, these findings suggest that the pre-adapted indigenous fungal isolates have proven remarkable tolerance ability to both metals. Furthermore, these highly metal-tolerant fungal strains are recommended for detail research or can use in pilot-scale bioremediation application to treat contaminated site.

The Water Framework Directive aims at reaching the good ecological status of the surface and ground water bodies (László et al. Microchem J 85(1):65–71, 2007). The paper deals with quality evaluation of waters with special focus on the water chemistry parameters as defined in the Water Framework Directive and pertaining legal regulations. The purpose of this paper is to devise a quantitative type of water quality assessment method which could provide rapid, accurate, and reliable information on the quality of the surface waters by using water chemistry parameters. Quality classes have been defined for every water chemistry parameter in light of the legal limit values of the water parameters. In addition to this, weight indices were calculated on the basis of the outcome of the paired comparison of water chemistry parameters and normalized matrix. This was followed by the parametric level analysis of the water chemistry parameters, and finally, the aquatic environment index (AEI) was calculated, which provided general information on the quality of water regarding the water chemistry parameters. The method was illustrated on Lake Balaton, Hungary in which case water samples taken from Balatonfüred City lake area were analyzed and evaluated with the method devised.

In the caves, the formation of cave minerals is a consequence of a variety of chemical reactions, some of them also due to human activity. There are many caves in Slovenia, but sulphate minerals are not very often reported and analysed. In this study, the presence of sulphate minerals is detected by SEM/EDS analysis of speleothems from Črna Jama, a cave near Kočevje (southern Slovenia). The cave is characterised by its dark, almost black colour on cave walls, floor and speleothems. Anthropogenic influence in the cave is still visible, including the remains of a fireplace, some inscriptions on the walls and wooden containers. The analyses of some of the black-coated speleothems reveal the presence of calcium sulphate, confirmed by XRD as gypsum. Gypsum crystals are around 50 μm in size, and they occur in thin crusts. Additionally, some rare authigenic baryte crystals a few micrometres in size are detected. The sulphates δ³⁴S value in gypsum found on dark coloured speleothems is + 10.4‰ Vienna Canyon Diablo Troilite (VCDT), while the sulphate δ³⁴S of the bedrock is + 8.6‰ VCDT. The more likely source of sulphate ions is thus biomass burning rather than bedrock. Also, bedrock and biomass ash are a very probable source of calcium and barium. The highly probable pyrogenous origin of sulphates draws attention to human impact on cave mineralogy.

The biological quality of secondary treated sewage effluent was evaluated using a toolbox approach, which combined a larval developmental bioassay and measurement of fecal indicator organisms. The zoea developmental toxicity of Scylla serrata from stage I to stage II was determined by exposing to a range of secondary treated sewage concentrations. Results indicated that the relative progress of zoea stage I to zoea stage II negatively correlated with increasing sewage concentrations. Data was analyzed statistically to determine lethal, median lethal, sublethal, low observed effect, and no observed effect concentrations. Water samples collected along the Buckingham canal discharge zone were also analyzed for its toxicity to the larval development. Fecal indicator organisms chosen to determine the water quality were E. coli, enterococci, C. perfrigens, and F+ coliphages. Concentrations of these fecal markers were determined in the raw influent, primary treated effluent, secondary treated effluent, and in four discharge zone sites. Data showed that this biological toolbox is helpful for providing baseline information on the effectiveness of the wastewater treatment and environmental health of the discharge zone.

We previously reported high levels of phthalate esters (PAEs) added as solvents or fixatives in 47 brands of perfumes. Diethyl phthalate was the most abundant compound (0.232–23,649 ppm), and 83.3% of the perfumes had levels >1 ppm, the threshold limit cited by a Greenpeace investigation. All samples had dimethyl phthalate levels higher than its threshold limit of 0.1 ppm, and 88, 38, and 7% of the perfumes had benzyl butyl phthalate, di(2-ethylhexyl) phthalate, and dibutyl phthalate levels, respectively, above their threshold limits. The role of PAEs as endocrine disruptors has been well documented, but their effect on genotoxic behavior has received little attention. We used in vitro single-cell gel electrophoresis (comet) and micronucleus (MN) assays with human lymphoblastoid TK6 cells to evaluate the genotoxic potency of 42 of the same perfumes and to determine its association with PAEs. All perfumes induced more DNA damage than a negative control (NEG), ≥ 90% of the samples caused more damage than cells treated with the vehicles possibly used in perfume’s preparations such as methanol (ME) and ethanol (ET), and 11.6% of the perfumes caused more DNA damage than a positive control (hydrogen peroxide). Chromosome breakage expressed as MN frequency was higher in cells treated with 71.4, 64.3, 57.1, and 4.8% of the perfumes than in NEG, cells treated with ME or ET, and another positive control (x-rays), respectively. The genotoxic responses in the comet and MN assays were not correlated. The comet assay indicated that the damage in TK6 cells treated with five PAEs at concentrations of 0.05 and 0.2 ppm either individually or as a mixture did not differ significantly from the damage in cells treated with the perfumes. Unlike the comet assay, the sensitivity of the MN assay to PAEs was weak at both low and high concentrations, and MN frequencies were generally low. This study demonstrates for the first time the possible contribution of PAEs in perfumes to DNA damage and suggests that their use as solvents or fixatives should be regulated. Other ingredients with mutagenic/genotoxic properties, however, may also have contributed to the DNA damage. Future studies should focus on applying a series of assays that use different cellular models with various endpoints to identify the spectrum of genotoxic mechanisms involved.