In this study, MODerate resolution Imaging Spectroradiometer (MODIS) Collection 6.1 (C6.1) level-2 Dark Target (DT) Aerosol Optical Depth (AOD) observations at 550 nm (AOD₅₅₀) for the highest quality flag assurance (QA = 3) were obtained to analyze spatiotemporal variations of aerosol optical properties over the Yellow and the Bohai Sea from 2002 to 2017. Spectral AOD observations at 470 nm (AOD₄₇₀) and 660 nm (AOD₆₆₀) were obtained to calculate Angstrom Exponent (AE₄₇₀–₆₆₀) and classify the aerosol types including clean continental (CC), clean maritime (CM) biomass and urban industrial (BUI), dust (D), and mixed (MXD) aerosol types. Results showed a very distinct spatial pattern of AOD distribution over the Bohai Sea which looks suspicious, i.e., high aerosol loadings (AOD > 0.8) throughout the entire time period, whereas relative low AOD distribution was observed over the adjacent land pixels especially in autumn and winter, which suggested that the DT algorithm might be influenced by a large number of sediments located in the Bohai Sea. Significant differences in spatial distributions were found in different seasons in terms of area coverage as a maximum number of pixels were available during autumn, and regional high and low aerosol loadings were observed during autumn and summer, respectively. Trend analysis from 2002 to 2017 showed that AOD was increased up to 0.04 over the Bohai Sea and decreased up to 0.04 over the Yellow Sea, and this trend varies from month to month. Aerosol classification showed significant contributions of BUI and CC over the region, and contributions of CM, DUST, and MXD aerosols over the Yellow Sea were relatively high compared to the Bohai Sea.

Carbon monoxide (CO) emission inventory data are crucial for air quality control. However, the emission inventories are labor-intensive and time-consuming and generally have large uncertainties. In this study, we developed a new regional data assimilation system (TracersTracker) for estimating the surface CO emission flux from continuous mixing ratio observations using the proper orthogonal decomposition (POD)-based four-dimensional variational (4D-VAR) data assimilation method (POD-4DVar) and a coupled regional model (Weather Research and Forecasting model (WRF) with the Models-3 Community Multi-scale Air Quality (CMAQ) model). This system was applied to estimate CO emissions in Xuzhou city, China. An experiment was conducted with the continuous hourly surface CO mixing ratio observations from 21 monitoring towers in January and July of 2016. The experimental results of the system were examined and compared with the continuous surface CO observations (a priori emission). We found that the retrieved CO emission fluxes were higher than the a priori emission and were mainly distributed in urban and industrial areas, which were 104% higher in January (winter) and 44% higher in July (summer).

Extracellular polymeric substances (EPSs) extracted from fungal mycelium by four chemical methods (NaOH, H₂SO₄, formaldehyde-NaOH, glutaraldehyde-NaOH), three physical methods (heating, ultrasound, vibration), and a control method (centrifugation alone) were investigated. Results indicated formaldehyde-NaOH outperformed other methods with 186.6 ± 8.0 mg/g of polysaccharides and 23.2 ± 4.6 mg/g of protein extracted and ensured little contamination by intracellular substances. Thereafter, this method was applied in extracting EPS from a mixed fungal culture in the adaptation process with 0.5% (w/v) waste printed circuit boards (PCBs). With the four adaptation stages continuing, the culture tended to become more sensitive to respond to the external toxic environment characterized by secreting EPS more easily and quickly. The maximum amount of polysaccharides and protein could be achieved in only 3 days both at the 3rd and 4th adaptation stage. Three-dimensional excitation-emission matrix fluorescence spectrum indicated the peaks obtained for EPS were mainly associated to soluble microbial by-product-like and aromatic protein-like compounds. Transmission electron microscopic observation illustrated that although metal ions penetrated into hypha cells, parts of them could be absorbed by EPS, implying that EPS secretion may be a primary protective strategy adopted by the culture.

The anaerobic feed of tannery effluent was treated using a new invention of an integrated approach: electrochemical oxidation with aerobic pretreatment, which reduces the chemical oxygen demand (COD) and sulfur/sulfide gas formation. Bacterial consortium was used in the present study isolated from a common effluent treatment plant (CETP). Microbial community analysis of anaerobic feed of tannery effluent (AFTE) was done by next generation sequencing. Under aerobic treatment, 79% and 85% of COD reduction were achieved during 3rd and 5th days of the aerobic process. The electrochemical oxidation process was applied for 60 min to reduce the remaining COD using the current density of 20 mA/cm². Ti-TiO₂/IrO₂/RuO₂-coated mesh and titanium sheet were used as anode and cathode respectively in an electrochemical reactor. A separate electrooxidation experiment was also carried out with galvanostatic mode of constant current density (20 mA/cm²) which enhanced the duration of electrochemical oxidation up to 13 h for complete reduction of COD concentration. UV-Vis and NMR spectroscopy were used to confirm the degradation of organic matter in the tannery effluent during aerobic and electrooxidation processes, where aerobic bacterial degradation is significant. The presence of mixed salt chloride and sulfate was recovered and the elemental composition was confirmed by EDAX analysis.

The present research highlights the use of a montmorillonite clay to remove p-nitrophenol (PNP) from aqueous solution. The montmorillonite clay was characterized using powder X-ray diffraction, Fourier-transformed infrared spectroscopy, scanning electron microscopy, X-ray fluorescence, Brunauer-Emmett-Teller analyses, and zero point charge in order to establish the adsorption behavior-properties relationship. The physiochemical parameters like pH, initial PNP concentration, and adsorbent dose as well as their binary interaction effects on the PNP adsorption yield were statistically optimized using response surface methodology. As a result, 99.5% removal of PNP was obtained under the optimal conditions of pH 2, adsorbent dose of 2 g/l, and PNP concentration of 20 mg/l. The interaction between adsorbent dose and initial concentration was the most influencing interaction on the PNP removal efficiency. The mass transfer of PNP at the solution/adsorbent interface was described using pseudo-first-order and intraparticle diffusion. Langmuir isotherm well fitted the experimental equilibrium data with a satisfactory maximum adsorption capacity of 122.09 mg/g. The PNP adsorption process was thermodynamically spontaneous and endothermic. The regeneration study showed that the montmorillonite clay exhibited an excellent recycling capability. Overall, the montmorillonite clay is very attractive as an efficient, low-cost, eco-friendly, and recyclable adsorbent for the remediation of hazardous phenolic compounds in industrial effluents.

Wetlands act as kidneys of land and facilitate remediation of metals and other harmful pollutants through uptake by aquatic macrophytes. The aim of the present study was to investigate metal concentrations in sediments and plants, sources of metal origin, and contamination level in Uchalli Wetland Complex. Sediment samples were collected from 15 randomly selected sites. Metal concentrations (Cd, Pb, Ni, Cu, Zn, Cr, As, Mn) in sediments and macrophytes were determined during summer and winter seasons using the inductively coupled plasma technique. Metal concentrations in sediments during summer and winter seasons were in the order as follows: As > Mn > Zn > Cr > Ni > Cd > Pb > Cu and As > Mn > Zn > Cr > Ni > Pb > Cd >Cu respectively. All analyzed metals were within European Union (EU) limits. In macrophytes, these metals were in the order as follows: Mn > As > Ni > Zn > Cr > Cd > Cu > Pb and As > Mn > Zn > Ni > Cr > Cd > Pb during summer and winter seasons respectively. Contamination degree (Cd) (1.023–5.309) for these lakes showed low contamination during both seasons; mCd values (below 1.5) showed very little contamination degree, while the pollution load index (0.012 to 0.0386) indicated no metal pollution in these lakes. PCA applied on sediment showed that Pb, Zn, Cr, Cu, and Cd had anthropogenic sources of origin. As and Mn were due to natural processes while Ni could be resultant of both anthropogenic and natural sources. PCA on macrophytes showed that Ni, Pb, Cr, Zn, Cu; Cd, As; Mn had anthropogenic, natural, and anthropogenic + natural sources of origin. The study concluded that metal concentrations in sediments were not up to dangerous level.

Cadmium (Cd) contamination in agricultural soils is a prevalent environmental issue and poses potential threats to food security. Foliar ascorbic acid might prove a potent tool to alleviate toxicity of Cd toxicity in maize. An experiment was conducted with objectives to study exogenous ascorbic acid–modulated improvements in physiochemical attributes of maize under Cd toxicity. The experiment was conducted under completely randomized design. Treatments were comprised of varying concentrations of foliar ascorbic acid viz. 0.0, 0.1, 0.3, and 0.5 mM of AsA. Toxicity of Cd decreased the maize growth, increased lipid peroxidation, disturbed protein metabolism, and reduced the antioxidant defense capabilities compared with the control. However, foliar AsA significantly improved maize growth and development, photosynthetic capabilities, and protein concentrations in Cd-stressed maize plants. Meanwhile, the malondialdehyde contents and hydrogen peroxide accumulation levels in Cd-stressed maize plants decreased remarkably with increasing AsA concentrations. Furthermore, the combined treatments conspicuously boosted activities of superoxide dismutase, peroxidase, catalase, and glutathione reductase under the Cd stress alone. In addition, the application of AsA reduced the Cd uptake by 10.3–12.3% in grains. Conclusively, foliar ascorbic acid alleviated the negative effects of Cd stress in maize and improved photosynthetic processes, osmolytes, and antioxidant defense systems.

Effective landfill management and operation require an accurate evaluation of the occurrence and extent of odour emission events, which are among the main causes of resident complaints and concerns, in particular in densely urbanised areas. This paper proposes a fuzzy optimal protection system (FOPS) based on fuzzy logic to manage odour production from a municipal solid waste (MSW) landfill. The case study is a MSW landfill in an old quarry site located 6 km north-west of Naples city centre (Italy). The aim is to reduce the odour nuisance in the area surrounding the landfill where there are several sensitive receptors. FOPS is based on logical relationships between local atmospheric dynamics, number and intensity of odour pollution events detected by certain fixed receptors and odour emission rate via an optimal fuzzy approach. Such system allows to start, in real time, established mitigation actions required to further reduce the odorous emissions from the landfill itself (e.g. spraying of perfumed substances and activation of extraction wells), especially when weather conditions might not be favourable and cause by causing a higher odour perception. The fuzzy system was coupled with the air pollutant transport software CALPUFF to simulate the odour dispersion in the considered area taking into account both different odour emission rates and local weather conditions. FOPS results show that this approach can be very useful as, by measuring the odour concentrations, a significant reduction of the odour exceedances over the thresholds fixed, to minimise the olfactory harassment, was observed in the whole area studied.

Nanotechnology provides innovative and promising solutions for the conservation of cultural heritage, but the development and application of new nano-enabled products pose concerns regarding their human health and environmental risks. To address these issues, we propose a sustainability framework implementing the Safe by Design concept to support product developers in the early steps of product development, with the aim to provide safer nano-formulations for conservation, while retaining their functionality. In addition, this framework can support the assessment of sustainability of new products and their comparison to their conventional chemical counterparts if any. The goal is to promote the selection and use of safer and more sustainable nano-based products in different conservation contexts. The application of the proposed framework is illustrated through a hypothetical case which provides a realistic example of the methodological steps to be followed, tailored and iterated along the decision-making process.

2,4-Dicholorophenoxy acetic acid (2,4-D) is a worldwide used hormone herbicide. Human dental pulp stem cells (hDPSCs) as a potential source of mesenchymal stem cells provide a confident model system for the assessments of chemicals in vitro. The main objective of this study was to examine the biological effects and damages attributed to 2,4-D on hDPSCs. hDPSCs were isolated from third molar pulp tissues and their mesenchymal identity were evaluated. Then, hDPSCs were treated with increasing concentrations of 2,4-D (0.1 μM–10 mM). Cell viability assay and cumulative cell counting were carried out to address 2,4-D effects on biological parameters of hDPSCs. Cell cycle distribution, ROS level and ALP activity were measured before and after treatment. AO/EB staining and caspase 3/7 activity were investigated to detect the possible mechanisms of cell death. Flow-cytometric immunophenotyping and differentiation data confirmed the mesenchymal identity of cultivated hDPSCs. 2,4-D treatment caused a hormetic response in the viability and growth rate of hDPSCs. G0/G1 cell cycle arrest, enhanced ROS level, and reduced ALP activity were detected in hDPSCs treated with EC50 dose of 2,4-D. AO/EB staining showed a higher percentage of alive cells in lower concentrations of the herbicide. The increment in 2,4-D dose and the number of early and late apoptotic cells were increased. DAPI staining and caspase 3/7 assay validated the induction of apoptosis. 2,4-D concentrations up to 100 μM did not affect hDPSCs viability and proliferation. The intense cellular oxidative stress and apoptosis were observed at higher concentration.