Plastic marine debris hyper-concentrates hydrophobic contaminants such as polycyclic aromatic hydrocarbons (PAHs) and can transfer these sorbed contaminants to biota following ingestion. PAHs are known to induce cardiotoxicity and visual toxicity at sublethal doses. Juvenile White seabass (Atractoscion nobilis) fish were fed environmentally relevant concentrations of either virgin polystyrene or benzo(a)pyrene (BaP)-sorbed polystyrene for 5 days and were monitored for changes in phototactic response, swimming behavior, and hepatic cytochrome p450 1A (CYP1A) enzyme activity. No significant differences in the monitored endpoints were recorded in fish that ingested either polystyrene or BaP-sorbed polystyrene relative to control fish following the short-term exposure. However, fish exposed to 252 μg/L BaP alone as a positive control had significantly elevated CYP1A enzyme activity (p = 0.046) and impaired phototactic response (p = 0.020), though no altered swimming behavior was observed (p = 0.843) relative to control fish. These results demonstrate that pelagic fish ingesting environmentally relevant concentrations of BaP-sorbed polystyrene for a short, 5-day duration do not demonstrate measurable changes in vision, swimming activity, nor CYP1A activity. High variability within enzyme activity and behavioral responses suggest that lack of significant effects may be due to low sample size.

Environmental complexity leads to differences in the spatial distribution of heavy metal pollution in soil and rice. Such spatial differences will seriously affect the safety of planted rice and can impact regional management and control. How to scientifically reveal these spatial differences is an urgent problem. In this study, the spatial mismatch relationship between Cd pollution in soil and rice grains (brown rice) was first explored by the interpolation method. To further reveal the causes of these, the specific recognition rules of the spatial relationship of Cd pollution were extracted based on a decision tree model, and the results were mapped. The results revealed a spatial mismatch in Cd pollution between the soil and rice grains in the study area, and the main results are as follows: (i) slight soil pollution and safe rice accounted for 68.88% of the area; (ii) slight soil pollution and serious rice pollution accounted for 13.39% of the area and (iii) safe soil and serious rice pollution accounted for 11.63% of the area. In addition, 11 recognition rules of Cd spatial pollution relationship between soil and rice were proposed, and the main environmental factors were determined: SOM (soil organic matter), Dis-residence (distance from residential area), soil pH and LAI (leaf area index). The average accuracy of rule recognition was 75.90%. The study reveals the spatial mismatch of heavy metal pollution in soil and crops, providing decision-making references for the spatial accurate identification and targeted prevention of heavy metal pollution spaces.

Summertime ozone (O₃) concentrations over China continue to increase although the governmental Clear Air Actions have been carried out since 2013. The worst O₃ pollution is confronted over North China Plain. Ozone polluted days (with observed regionally-averaged maximum daily 8-h average (MDA8) O₃ concentrations exceeding 80 ppbv) in May–July in North China increased from 35 days in year 2014 to 56 days in year 2018, and persistent O₃ pollution episodes that lasted for 5 days or longer (OPEs5) contributed 14.3% and 66.1% to those O₃ polluted days in 2014 and 2018, respectively. Model simulations suggest that O₃ transport from central eastern China (including Shandong, Henan, Jiangsu and Anhui Provinces) contributes 36% of the enhanced O₃ concentrations in North China during OPEs5 relative to the seasonal mean. We find that emission control of volatile organic compounds in central eastern China is most effective to alleviate intensity of OPEs5 in North China.

Fine particulate matter (PM₂.₅) pollution has become a worldwide environmental concern because of its adverse impacts on human health. This study aimed to explore the spatiotemporal variations and influencing factors of PM₂.₅ concentrations in Beijing during the 2013–2018 period, and further analyzed the impacts of environmental protection policies implemented in recent years. Notably, this study employed various statistical methods, i.e., ordinary Kriging interpolation, spatial autocorrelation analysis, time-series analysis and the Bonferroni test, to evaluate the regional and seasonal differences of PM₂.₅ concentrations based on long-term monitoring data. The results illustrated that PM₂.₅ concentrations decreased on a yearly basis, demonstrating that air pollution control policies have achieved initial success. Furthermore, PM₂.₅ concentrations were higher in the winter and in the southern regions. Diurnal variation presented a bimodal distribution, which varied slightly with the season. Relative humidity and wind speed were the principal meteorological factors affecting the distribution of PM₂.₅ concentrations, while precipitation had essentially no effect. A high positive correlation between PM₂.₅ and gaseous pollutants (SO₂, NO₂, and CO) indirectly reflected the contribution of automobile exhaust and coal-fired emissions. Generally, PM₂.₅ concentrations demonstrated strong spatiotemporal variations, and meteorological factors and pollutant emissions played an important role in this.

Pine needles are employed as alternative biomonitoring agents in atmospheric studies. In this study, pine (Pinus Pinea) components (needles and branches) and air samples were collected simultaneously to monitor polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) from Gemlik, Turkey between January and December 2016. The relationship between ambient air and pine needles were examined to enlighten the usability of pine components as passive samplers for persistent organic pollutants (POPs) in the Marmara region. Average ∑14PAH concentrations for the ambient air, pine needles, and pine branches were 23.1 ± 18.3 ng/m3, 626 ± 306 ng/g DW and 548 ± 261 ng/g DW respectively. PCB concentrations were 118 ± 74 pg/m3, 7.5 ± 2.1 ng/g DW and 6.8 ± 2.9 ng/g DW and ∑10 OCP concentrations were 122 ± 89 ng/m3,1.3 ± 1.5 ng/g DW and 10.0 ± 3.8 ng/g DW in the same order. Levels of PAHs and PCBs were higher in needles than branches. PAH, PCB and OCP concentrations in pine components tended to decrease with increasing temperatures in spring. PAH compounds with medium and light molecular weighted ones were found to be dominant. On the other hand, the predominant PCB components were the medium-weighted congeners while γ-HCH, Heptachlor endo. Epox. Iso A, endrin aldehyde, and methoxychlor were the dominant OCP species.

Bisphenol A (BPA) is a harmful environmental contaminant acting as an endocrine disruptor in animals, but it also affects growth and development in plants. Here, we have elucidated the functional mechanism of root growth inhibition by BPA in Arabidopsis thaliana using mutants, reporter lines and a pharmacological approach. In response to 10 ppm BPA, fresh weight and main root length were reduced, while auxin levels increased. BPA inhibited root growth by reducing root cell length in the elongation zone by suppressing expansin expression and by decreasing the length of the meristem zone by repressing cell division. The inhibition of cell elongation and cell division was attributed to the enhanced accumulation/redistribution of auxin in the elongation zone and meristem zone in response to BPA. Correspondingly, the expressions of most auxin biosynthesis and transporter genes were enhanced in roots by BPA. Taken together, it is assumed that the endocrine disruptor BPA inhibits primary root growth by inhibiting cell elongation and division through auxin accumulation/redistribution in Arabidopsis. This study will contribute to understanding how BPA affects growth and development in plants.

A dissolved air flotation (DAF) system is one of the water treatment processes that purifies contaminants through a buoyancy effect by attaching the moiety of micro-bubbles on their free surface. Since the DAF system was first used in the drinking water treatment in the 1960s, it has been recognized as an effective treatment for the water purification process. Most previous works laid great emphasis on the internal flow behaviors of fluid to improve the purification efficiency of the DAF system. Nevertheless, the practical implementation with a pilot plant indeed revealed some technical incompleteness for the DAF system. To circumvent for the technical incompleteness, numerical simulation based on computational fluid dynamics (CFD) has been carried out to understand the in-depth knowledge on internal flow phenomena in the DAF system. However, the standard k-ε turbulence model has been conventionally used in the most studies without any proper consideration process. Accordingly, the objectives of this study were to investigate the major effects on the internal flow behaviors for an efficient numerical simulation of DAF when a different turbulence model and micro-bubble parameters are used. As a result, the present study found that the standard k-ε model would be not proper for the internal flow simulation of the DAF process and a careful consideration would be required for a more accurate prediction. In addition, the present study examined a desirable internal flow pattern with various operating conditions of the micro-bubble. Consequently, the main findings of this study are expected to provide realistic information to related researchers for designing the DAF system with the optimal operating parameters.

While the measurement of particulate matter (PM) with a diameter of less than 2.5 μm (PM₂.₅) has been conducted for personal exposure assessment, it remains unclear how models that integrate microenvironmental levels with resolved activity and location information predict personal exposure to PM. We comprehensively investigated PM₂.₅ concentrations in various microenvironments and estimated personal exposure stratified by the microenvironment. A variety of microenvironments (>200 places and locations, divided into 23 components according to indoor, outdoor, and transit modes) in a community were selected to characterize PM₂.₅ concentrations. Infiltration factors calculated from microenvironmental/central-site station (M/S) monitoring campaigns with time-activity patterns were used to estimate time-weighted exposure to PM₂.₅ for university students. We evaluated exposures using a four-stage modeling approach and quantified the performance of each component. It was found that the SidePak monitor overestimated the concentration by 3.5 times as compared with the filter-based measurements. Higher mean concentrations of PM₂.₅ were observed in the Taoist temple and night market microenvironments; in contrast, lower concentrations were observed in air-conditioned offices and car microenvironments. While the exposure model incorporating detailed time-location information and infiltration factors achieved the highest prediction (R² = 0.49) of personal exposure to PM₂.₅, the use of indoor, outdoor, and transit components for modeling also generated a consistent result (R² = 0.44).

The carbon dots (C-dots) mediated Sn₂Ta₂O₇/SnO₂ heterostructures with spongy structure were successfully assembled by simple hydrothermal route. The photocatalytic removal efficiency of amoxicillin (AMX, 20 mg L⁻¹) over C-dots/Sn₂Ta₂O₇/SnO₂ was estimated to reach up 88.3% within 120 min simulated solar light irradiating. Meanwhile, the HPLC-MS/MS analysis and density functional theory (DFT) computation were examined to clarify the photo-degradation pathway of AMX. The mechanism investigation proposed that with the modification of C-dots, the photocatalysts improves the utilization of solar energy by harvesting the long wavelength solar light due to their unique up-converted photoluminescence (UCPL). In addition, the porous spongy structure and plenty of tiny C-dots promote the ability of adsorption by enlarged specific surface area. Furthermore, the C-dots mediated Z-type heterojunction of Sn₂Ta₂O₇/SnO₂ facilitates the efficient separation and transfer of photo-induced carriers. Our work affords a promising approach for the design of the high-efficient photocatalysts to remedy poisonous antibiotics in aqueous environment.

A tropical soil Actinomycete, Gordonia amicalis HS-11, has been previously demonstrated to degrade unsaturated and saturated hydrocarbons (squalene and n-hexadecane, respectively) in an effective manner. In present study, G. amicalis HS-11 degraded 92.85 ± 3.42% of the provided diesel oil [1% (v/v)] after 16 days of aerobic incubation. The effect of different culture conditions such as carbon source, nitrogen source, pH, temperature, and aeration on degradation was studied. During degradation, this Actinomycete synthesized surface active compounds (SACs) in an extracellular manner that brought about a reduction in surface tension from 69 ± 2.1 to 30 ± 1.1 mN m⁻¹ after 16 days. The morphology of cells grown on diesel was monitored by using a Field Emission Scanning Electron Microscope. Diesel-grown cells were longer and clumped with smooth surfaces, possibly due to the secretion of SACs. The interaction between the cells and diesel oil was studied by Confocal Laser Scanning Microscope. Some cells were adherent on small diesel droplets and others were present in the non-attached form thus confirming the emulsification ability of this organism. The fatty acid profiles of the organism grown on diesel oil for 48 h were different from those on Luria Bertani Broth. The genotoxicity and cytotoxicity of diesel oil before and after degradation were determined. Cytogenetic parameters such as mitotic index (MI); mitosis distribution and chromosomal aberration (type and frequency) were assessed. Oxidative stress was evaluated by measuring levels of catalase, superoxide dismutase and concentration of malondialdehyde. On the basis of these studies it was deduced that the degradation metabolites were relatively non-toxic.