The dissolution of Ag (citrate, gelatin, polyvinylpyrrolidone and chitosan coated), ZnO, CuO and carbon coated Cu nanoparticles (with two nominal sizes each) has been studied in artificial aqueous media, similar in chemistry to environmental waters, for up to 19 days. The dissolved fraction was determined using DGT (Diffusion Gradients in Thin films), dialysis membrane (DM) and ultrafiltration (UF). Relatively small fractions of Ag nanoparticles dissolved, whereas ZnO dissolved nearly completely within few hours. Cu and CuO dissolved as a function of pH. Using DGT, less dissolved Ag was measured compared to UF and DM, likely due to differences in diffusion of organic complexes. Similar dissolved metal concentrations of ZnO, Cu and CuO nanoparticles were determined using DGT and UF, but lower using DM. The results indicate that there is a need to apply complementary techniques to precisely determine dissolution of nanoparticles in aqueous media.

A whole-cell bacterial bioreporter Acinetobacter baylyi strain ADP1_recA_lux that responds to genotoxins was employed to directly assess the adverse effects of the bioavailable fraction of mitomycin C (MMC), benzo[a]pyrene (BaP), chromium (VI) and lead (II) in amended soils and soil samples from two fragile areas in China without soil pre-treatment. The amended soils containing pollutants with the concentrations as low as 0.4 mg/kg MMC, 0.5 mg/kg BaP, 520 mg/kg Cr (VI) and 2072 mg/kg Pb (II) were found to be toxic. Soil particle-associated pollutants accounted for 86%, 100%, 29%, and 92% of the genotoxicity in the MMC, BaP, Cr (VI), and Pb (II) amended soil, respectively. The soils from contaminated sites were also valid to be genotoxic. The results suggest both free and soil particle-associated pollutants are bioavailable to soil organisms and a solid-phase contact bioreporter assay to soil contamination could provide a rapid screening tool for environmental risk assessment.

Mercury is a ubiquitous global environmental toxicant responsible for most US fish advisories. Processes governing mercury concentrations in rivers and streams are not well understood, particularly at multiple spatial scales. We investigate how insights gained from reach-scale mercury data and model simulations can be applied at broader watershed scales using a spatially and temporally explicit watershed hydrology and biogeochemical cycling model, VELMA. We simulate fate and transport using reach-scale (0.1 km2) study data and evaluate applications to multiple watershed scales. Reach-scale VELMA parameterization was applied to two nested sub-watersheds (28 km2 and 25 km2) and the encompassing watershed (79 km2). Results demonstrate that simulated flow and total mercury concentrations compare reasonably to observations at different scales, but simulated methylmercury concentrations are out-of-phase with observations. These findings suggest that intricacies of methylmercury biogeochemical cycling and transport are under-represented in VELMA and underscore the complexity of simulating mercury fate and transport.

The environmental pollution and health risks caused by the improper disposal of electric and electronic waste (e-waste) have become urgent issues for the developing countries. One of the typical pollutants, polychlorinated biphenyls (PCBs), is commonly found in farmland in Taizhou, a major hotspot of e-waste recycling in China. This study investigated the amount of PCB residue in local farmlands. Biotransformation of PCBs was further studied under different water management conditions in paddy field with or without rice cultivation, with a special focus on the alternating flooded and drying processes. It was found that paddy field improved the attenuation of PCBs, especially for highly chlorinated congeners. In the microcosm experiment, 40% or more of the initial total PCBs was removed after sequential flood–drying treatments, compared to less than 10% in the sterilized control and 20% in the constant-drying system. Variation in the quantity of PCBs degrading and dechlorinating bacterial groups were closely related to the alteration of anaerobic–aerobic conditions. These results suggested that alternating anoxic–oxic environment in paddy field led to the sequential aerobic–anaerobic transformation of PCBs, which provided a favorable environment for natural PCB attenuation.

A systematic study on the chemical characteristics of ambient PM2.5, collected during October-2011 to March-2012 from a source region (Patiala: 30.2°N, 76.3°E; 250 m amsl) of biomass burning emissions in the Indo-Gangetic Plain (IGP), exhibit pronounced diurnal variability in mass concentrations of PM2.5, NO3−, NH4+, K+, OC, and EC with ∼30–300% higher concentrations in the nighttime samples. The average WSOC/OC and SO42−/PM2.5 ratios for the daytime (∼0.65, and 0.18, respectively) and nighttime (0.45, and 0.12, respectively) samples provide evidence for secondary organic and SO42− aerosol formation during the daytime. Formation of secondary NO3− is also evident from higher NH4NO3 concentrations associated with lower temperature and higher relative humidity conditions. The scattering species (SO42− + NO3− + OC) contribute ∼50% to PM2.5 mass during October–March whereas absorbing species (EC) contribute only ∼4% in October–February and subsequently increases to ∼10% in March, indicating significance of these species in regional radiative forcing.

Surface sediments and corals (Acropora sp. and Montipora sp.) from the coastline of Kenting were analyzed in 2009 and 2010 for content levels of polycyclic aromatic hydrocarbons (PAHs) using gas chromatography-mass spectrometry. The total PAH concentrations (t-PAH) in corasls (143–1715 ng g−1 dw) were significantly higher than in the ambient sediments (2–59 ng g−1 dw) indicating the bioaccumulation of PAHs in corals. The spatial and seasonal variation in PAH levels suggested that land-loaded contaminants may be the main source of PAHs in the Kenting coral reefs. Based on molecular indices, PAHs were substantially of petroleum origin. The major PAH components were phenanthrene, pyrene and fluorine, but PAH congeners in corals and sediments still have characteristic composition patterns which would be altered by the bio/accumulation mechanisms. Further study is essential to assess and understand the impacts of these chemicals on coral reefs.

Various sources supply PAHs that accumulate in soils. The methodology we developed provided an evaluation of the contribution of local sources (road traffic, local industries) versus remote sources (long range atmospheric transport, fallout and gaseous exchanges) to PAH stocks in two contrasting subcatchments (46–614 km²) of the Seine River basin (France). Soil samples (n = 336) were analysed to investigate the spatial pattern of soil contamination across the catchments and an original combination with radionuclide measurements provided new insights into the evolution of the contamination with depth. Relationships between PAH concentrations and the distance to the potential sources were modelled. Despite both subcatchments are mainly rural, roadside areas appeared to concentrate 20% of the contamination inside the catchment while a local industry was found to be responsible for up to 30% of the stocks. Those results have important implications for understanding and controlling PAH contamination in rural areas of early-industrialized regions.

Carbon nanotubes (CNT) are strong sorbents for organic micropollutants, but changing environmental conditions may alter the distribution and bioavailability of the sorbed substances. Therefore, we investigated the effect of green algae (Chlorella vulgaris) on sorption of a model pollutant (diuron, synonyms: 3-(3,4-Dichlorophenyl)-1,1-dimethylurea, DCMU) to CNT (multi-walled purified, industrial grade, pristine, and oxidized; reference material: Diesel soot). In absence of algae, diuron sorption to CNT was fast, strong, and nonlinear (Freundlich coefficients: 105.79–106.24 μg/kgCNT·(μg/L)−n and 0.62–0.70 for KF and n, respectively). Adding algae to equilibrated diuron-CNT mixtures led to 15–20% (median) diuron re-dissolution. The relatively high amorphous carbon content slowed down ad-/desorption to/from the high energy sorption sites for both industrial grade CNT and soot. The results suggest that diuron binds readily, but – particularly in presence of algae – partially reversibly to CNT, which is of relevance for environmental exposure and risk assessment.

Pharmaceutical compounds (PCs) are introduced into agricultural soils via irrigation with treated wastewater (TWW). Our data show that carbamazepine, lamotrigine, caffeine, metoprolol, sulfamethoxazole and sildenafil are persistent in soils when introduced via TWW. However, other PCs, namely diclofenac, ibuprofen, bezafibrate, gemfibrozil and naproxen were not detected in soils when introduced via TWW. This is likely due to rapid degradation as confirmed in our microcosm studies where they exhibited half-lives (t1/2) between 0.2–9.5 days when soils were spiked at 50 ng/g soil and between 3 and 68 days when soils were spiked at 5000 ng/g soil. The degradation rate and extent of PCs observed in microcosm studies were similar in soils that had been previously irrigated with TWW or fresh water. This suggests that pre-exposure of the soils to PCs via irrigation with TWW does not enhance their biodegradation. This suggests that PCs are probably degraded in soils via co-metabolism.