Aquatic plants play an important role in maintaining the health of water environment in nature. Studies have shown that linear alkylbenzene sulfonate (LAS), a type of omnipresent pollutant, can cause toxic damage to aquatic plants. In the present research, we studied the physiological and growth response of submerged plant Potamogeton perfoliatus L. to different concentrations of LAS (0.1, 1.0, 10.0, 20.0, and 50.0 mg l⁻¹). The results showed that LAS is toxic to P. perfoliatus, and the toxicity is dose-dependent. Only slightly reversible oxidative damages were observed in the physiological parameters of P. perfoliatus when P. perfoliatus was exposed to lower LAS doses (< 10 mg l⁻¹): soluble sugar, soluble protein, H₂O₂, and malondialdehyde (MDA) content in P. perfoliatus increased significantly at 0.1 mg l⁻¹ and then returned to normal levels at 1.0 mg l⁻¹. Antioxidant enzymes were activated before the LAS concentration reached 10 mg l⁻¹, and the activities of superoxide dismutase (SOD), catalase (CAT), and photosynthesis pigment content declined significantly when the concentration of LAS exceeded 10 mg l⁻¹. In addition, at higher concentrations (20–50 mg l⁻¹) of LAS, dry weight and fresh weight of P. perfoliatus showed significant declines. The results indicate that LAS above 10 mg l⁻¹ can cause serious physiological and growth damage to P. perfoliatus.

Pheromone-mediated mating disruption (MD) is widely used as a control tool to manage the European grapevine moth (EGVM), Lobesia botrana. Most of the MD formulations are “passive” reservoir dispensers, which need to be used at a rather large number of units per hectare. A promising alternative is represented by automatic aerosol devices, releasing pheromone puffs at programmed time intervals. Herein, we investigated the effectiveness of MD aerosol product Isonet® L MisterX841 in reducing EGVM infestation on grape in comparison to the reference MD product Isonet® L and the grower’s standard. Experiments were carried out over 2 years in two different study sites of Aragon region (Spain). EGVM male catches were monitored using traps baited with the female sex pheromone. The effectiveness of MD formulations against the three generations of EGVM was assessed by determining the percentage of infested bunches and the number of nests per bunch. As expected, a much greater amount of male catches in the grower’s standard over Isonet® L MisterX841 and Isonet ® L was observed. No significant differences about EGVM male catches were found in vineyards where Isonet® L MisterX841 and Isonet® L were used. EGVM-infested bunches, as well as number of nests per bunch, were higher in the grower’s standard, if compared to vineyards where we tested Isonet® L MisterX841 and Isonet® L. However, the employ of the latter led to a lower EGVM bunch infestation, if compared to Isonet® L MisterX841. Overall, the MD approach proposed here is effective against EGVM. These aerosol devices require a lower number of units per hectare if compared to hand-applied dispensers, saving labor costs and contributing to reduce plastic disposal in agricultural settings.

To understand whether flavor enhancers pose potential risks to the environment, it is important to assess its effects on insects. Therefore, the objective of this study was to evaluate the toxicity of flavor enhancers on the survival and behaviors of the red imported fire ant, Solenopsis invicta. In this study, we found that the mortality of S. invicta workers that were fed glutamic acid monosodium salt hydrate, glycine, L-alanine, succinic acid, succinic acid disodium, inosinate 5′-monophosphate disodium salt hydrate, and GMP were significantly higher than the mortality rates of workers fed sucrose. Moreover, glycine and GMP exhibited the strongest toxicities and caused 100% mortality in workers after 84 h. LC₅₀ values were 0.004 g/ml and 0.02 g/ml for GMP and glycine, respectively. Additionally, at sublethal doses, both GMP and glycine solutions decreased foraging and digging behaviors. Our results suggest that flavor enhancers are toxic to insects and also likely to have a negative impact at sublethal concentrations.

Alkylphenol (AP) and bisphenol A (BPA) contamination of urban runoff has already been established. Potential sources of these contaminants in runoff are endogenous to the urban watershed and are mainly related to traffic and leaching from construction materials. This article summarizes the results of experimental work carried out on a selection of building materials, automotive materials, and consumables, which can be in contact with rain, to assess their potential emission of alkylphenols, alkylphenol ethoxylates, and bisphenol A into runoff. 36 samples of materials, new and used, across 7 major families of building materials (PVC, concrete, polycarbonate, SBS-modified bitumen, drainage materials) and automotive materials (body, tires) were subjected to leaching tests with methanol and then, for a selection of them, with water. Automotive fluids were also directly analyzed. The results demonstrate the ubiquitous presence of APs and BPA in urban materials and their extractable character with water. The compounds with the strongest emission rates were bisphenol A and nonylphenol. The most important BPA emissions into water (10 to 300 ng/g) were measured for polycarbonate, tires, some car bodies, and PVC. Nonylphenol was leached in large quantities (1 to 10 ng/g) from PVC, some concretes, SBS-modified bitumen, and body samples. The tires were the only materials having a strong emission in octylphenol (1 to 10 ng/g). The analysis of automotive fluids confirmed the presence of BPA (0.3 to 5.5 g/L) and nonylphenol (2.3 to 2.9 mg/L) in brake fluids, while APs and BPA were found at trace levels in coolants and windscreen washer. Graphical abstract ᅟ

Particulate matter (PM) has been proven to cause health risks and may result in hospital emergency room visits (ERVs), which might be complicated by extreme temperature events. However, it remains unclear how temperature modulates the effect of different-sized particles on ERVs. This study used three separate time series analyses (2009–2011) to explore such temperature modulation effect in Beijing, China. The analytical approaches included a bivariate response surface model, a non-stratification parametric model, and a stratification parametric model. Results showed that the average daily concentrations of PM₁₀ and PM₂.₅ in Beijing were 110.16 and 67.89 μg/m³, respectively, during the study period, which were higher than in most Western countries. Our findings indicated that the temperature modulation effects of PM₂.₅ were more evident than that of PM₁₀. The effects of PM on morbidity depend on temperature. The effects were estimated for the increases in total, respiratory, and cardiovascular ERVs per 10 μg/m³ increase in PM₂.₅ and PM₁₀ concentrations at high temperature level (> 28 °C). The estimated increases in the three types of ERVs for PM₂.₅ were 0.15, 0.35, and 0.34%, respectively. For PM₁₀, the increases were 0.12, 0.08, and 0.14%, respectively. In addition, the results showed that the elderly (age ≥ 65) and women are more vulnerable to PM at high temperatures. These findings may have implications for the health impact associated with both air pollution and global climate change.

The solute transport model MODFLOW has become a standard tool in risk assessment and remediation design. However, particle transport models that take into account both particle agglomeration and deposition phenomena are far less developed. The main objective of the present study was to evaluate the feasibility of adapting the standard code MODFLOW/MT3D to simulate the agglomeration and transport of three different types of polymer-modified nanoscale zerovalent iron (NZVI) in one-dimensional (1-D) and two-dimensional (2-D) saturated porous media. A first-order decay of the particle population was used to account for the agglomeration of particles. An iterative technique was used to optimize the model parameters. The model provided good matches to 1-D NZVI-breakthrough data sets, with R ² values ranging from 0.96 to 0.99, and mass recovery differences between the experimental results and simulations ranged from 0.1 to 1.8 %. Similarly, simulations of NZVI transport in the heterogeneous 2-D model demonstrated that the model can be applied to more complicated heterogeneous domains. However, the fits were less good, with the R ² values in the 2-D modeling cases ranging from 0.75 to 0.95, while the mass recovery differences ranged from 0.7 to 6.5 %. Nevertheless, the predicted NZVI concentration contours during transport were in good agreement with the 2-D experimental observations. The model provides insights into NZVI transport in porous media by mathematically decoupling agglomeration, attachment, and detachment, and it illustrates the importance of each phenomenon in various situations. Graphical Abstract ᅟ

Silver nanoparticle-aided enhancement in the anti-corrosion potential and stability of plant extract as ecologically benign alternative for microbially induced corrosion treatment is demonstrated. Bioengineered silver nanoparticles (AgNPs) surface functionalized with plant extract material (proteinacious) was generated in vitro in a test tube by treating ionic AgNO₃ with the leaf extract of Azadirachta indica that acted as dual reducing as well as stabilizing agent. Purity and crystallinity of the AgNPs, along with physical and surface characterizations, were evaluated by performing transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive x-ray spectra, single-area electron diffractions, zeta potential, and dynamic light scattering measurements. Anti-corrosion studies against mild steel (MS1010) by corrosion-inducive bacterium, Bacillus thuringiensis EN2 isolated from cooling towers, were evaluated by performing electrochemical impedance spectroscopy (EIS), weight loss analysis, and surface analysis by infrared spectroscopy. Our studies revealed that AgNPs profoundly inhibited the biofilm on MS1010 surface and reduced the corrosion rates with the CR of 0.5 mm/y and an inhibition efficiency of 77% when compared to plant extract alone with a CR of 2.2 mm/y and an inhibition efficiency of 52%. Further surface analysis by infrared spectra revealed that AgNPs formed a protective layer of self-assembled film on the surface of MS1010. Additionally, EIS and surface analysis revealed that the AgNPs have inhibited the bacterial biofilm and reduced the pit on MS1010. This is the first report disclosing the application of bioengineered AgNP formulations as potent anti-corrosive inhibitor upon forming a protective layer over mild steel in cooling water towers. Graphical Abstract ᅟ

A spent bleaching earth (SBE) from an edible oil refinery has been regenerated by thermal processing in oven, followed by washing with a cold solution of hydrochloric acid (1M). Optimal regeneration conditions have been controlled by decolorization tests of degummed and neutralized soybean oil. Optimal values of treatment (temperature 350°C, carbonization time 01 h, and HCl concentration 1M) gave a very efficient material. After bleaching oil by regenerated spent bleaching earth (RSBE), the chlorophyll-a and β-carotenes contained in crude edible oil and observed respectively at 430, 454, and 483 nm, value of λ ₘₐₓ, are very much decreased. The results obtained after decolorization of edible oil by RSBE material indicate, that, during the process, the bleaching oil did not undergo any changes in the free fatty acid content. The peroxide value (PV) was reduced from 4.2 to 1.8 meq O₂/kg, and the color has been improved (Lovibond color yellow/red: from 50/0.5 to 2.7/0.3, respectively). The RSBE material obtained was characterized by several techniques (FTIR, SEM). The results show that the heat treatment did not affect the mineral structure of RSBE, and the regenerated material recovered its porous structure.

A number of severe norovirus outbreaks due to the consumption of contaminated shellfish have been reported recently. In this study, we evaluated the distribution of coliphage densities to determine their efficacy as fecal indicators of enteric viruses, including noroviruses, in water samples collected from a shellfish growing area in Republic of Korea over a period of approximately 1 year. Male-specific and somatic coliphages in water samples were analyzed using the single agar layer method, and norovirus genogroups I and II, which infect mainly humans, were analyzed using duplex reverse transcription quantitative PCR. Male-specific and somatic coliphages were detected widely throughout the study area. Several environmental parameters, including salinity, precipitation, temperature, and wind speed were significantly correlated with coliphage concentrations (P < 0.05). Moreover, the concentrations of male-specific coliphages were positively correlated with the presence of human noroviruses (r = 0.443; P < 0.01). The geospatial analysis with coliphage concentrations using a geographic information system revealed that densely populated residential areas were the major source of fecal contamination. Our results indicate that coliphage monitoring in water could be a useful approach to prevent norovirus contamination in shellfish.

In this study, avocado seed was successfully used as raw material for producing activated carbons by conventional pyrolysis. In order to determine the best condition to produce the activated carbons, a 2² full-factorial design of experiment (DOE) with three central points was employed by varying the temperature and time of pyrolysis. The two evaluated factors (temperature and time of pyrolysis) strongly influenced the SBET, pore volumes, hydrophobicity–hydrophilicity ratio (HI) and functional groups values; both factors had a negative effect over SBET, pore volumes and functional groups which means that increasing the values of factors leads to decrease of these responses; on the other hand, with regards to HI, both factors caused a positive effect which means that increasing their values, the HI has an enhancement over its values. The produced activated carbon exhibited high specific surface areas in the range of 1122–1584 m² g⁻¹. Surface characterisation revealed that avocado seed activated carbons (ASACs) have hydrophilic surfaces and have predominantly acidic groups on their surfaces. The prepared ASACs were employed in the adsorption of 25 emerging organic compounds such as 10 pharmaceuticals and 15 phenolic compounds which presented high uptake values for all emerging pollutants. It was observed that the activated carbon prepared at higher temperature of pyrolysis (700 °C), which generated less total functional groups and presented higher HI, was the activated carbon with higher sorption capacity for uptaking emerging organic contaminants. Based on results of this work, it is possible to conclude that avocado seed can be employed as a raw material to produce high surface area and very efficient activated carbons in relation to treatment of polluted waters with emerging organic pollutants.