The study aims to understand employees’ knowledge, awareness, and overall perception of drinking water quality in the Iron and Steel Industry in Burnpur, India. Further, this study evaluated drinking water’s physicochemical and bacteriological properties collected from different company sites. This study uses a mixed-method approach with individual interviews of selected employees (n=342) and the laboratory test of eight selected drinking water sites. The results show that most employees considered drinking water acceptable to be excellent. However, only 30% of employees in Site 1 (Coke Oven By-Product department) have reported organoleptic properties of water under the excellent category. The result explained that other physicochemical and bacteriological properties are in good status in all sites except for a colony count, expressing their suitability for drinking purposes. In summary, employees’ perception of water quality aligns with their drinking water’s physicochemical and bacteriological properties.

Nickel laterite mining is one of the sources of nickel-iron material used for producing steel and various materials. This mining activity leaves waste in the mine, including rocks, overburden, silt, and dust. Characterization is an important primary step in understanding waste for proper management, utilization, and disposal. The pH, organic matter, and elemental composition are analyzed in this study. The pH of nickel laterite mine waste is neutral to moderately alkaline, which makes it unlikely to cause acid mine drainage, which is one of the most prevailing environmental problems of mines. The organic matter content also showed favorable results for plant growth. However, the macronutrients necessary for the plant are too high, making it less favorable for agricultural utilization. Elemental composition shows the presence of nickel and other elements lower than the economically acceptable level. However, processing the lower grade can be the best option when all higher-grade resources are exhausted. The nickel laterite mine waste can be reused to further extract the metals when sources of higher grades are depleted, repurposed such as in the production of bricks and ceramics, or mined-out mines can be repurposed for renewable energy sources such as solar and wind farms.

In this fast-moving world, we use many electronic items daily to fulfill our daily work. Also, in the fast-growing economy, electronic items play key roles. India’s e-waste is projected to be around 18 lakh metric tons. According to industry sources, electronic trash will climb to almost 50 lakh metric tons in the next three years. According to government sources, only ten percent of electronic waste is gathered. These electronic items and batteries contain many heavy metals that are hazardous to humanity’s and the environment’s health. These heavy metals should be retrieved from the disposed of e-waste, so the resource can be reused or recycled, rather than continuously extracting heavy metals from the earth’s crust. In 2015, The “Initiative on Environmental Threats of Electronic Waste” was introduced by the Ministry of Electronics and Information Technology (MeitY). This project is part of the Indian government’s ‘Digital India’ strategy. There is an immediate need to implement green supply chain management and resource recovery from electronics waste so that circular material management (SDG 12) & sustainability can be achieved. This article demonstrates the problems and presents E-Waste recycling procedures, Life cycle assessment of E-waste, and EPR practices, along with potential areas for improvement. The bibliometric analysis was performed using R-studio biblioshiny tools for the last 53 years and 1243 published articles to understand the research trends.

The 7.4 Mw of tectonic earthquake caused liquefaction in Pasigala on September 28, 2018, happened due to the fault movement of Palu-Koro. It affected the water availability every spring. The research aim is to determine the spatial model of water production every spring after the natural tectonic disaster, especially in Palu and Poboya watersheds-a model built based on the integration between the spatial data overlaying and the statistical regression correlation. The sites are purposively selected at six springs spots and divided into four clusters (Poboya, Uemanje, Ranjuri Beka, Mantikole). The model assessment was generated based on the springs’ performance from x variables (catchment area, land cover, aquifer, free-ground water depth, fault, number of springs users) and the y variable (water discharge). The result shows that Poboya’s performance is bad-disturbed, while Uemanje, Ranjuri, Beka, and the performance of Mantikole are disturbed. The bad performance of springs requires conserving watershed areas through forest and land conservation, tree enrichment planting, wise land management, and good water use.

The present study aimed to evaluate the possible impact of noise pollution. This study was conducted in Raipur, the capital of Chhattisgarh state, India, to analyze the relationship between noise pollution and health complaints. A total of 18 locations were selected for monitoring noise pollution levels in the morning (9:00-10:30 AM) and evening (7:00-8:30 PM). Noise maps were prepared for both the time interval, and it was found that the highest equivalent noise level (Leq)of 81.31 dBA was observed at location L3 whereas the lowest Leq of 63.25 dBA was observed at L16 in the morning and in the evening 77.33 dBA at L3 and 60.14 dBA at L16 were observed. A questionnaire survey was performed on the population (n = 400) exposed to noise and analyzed through a variance-based partial least square (PLS) structural equation model (SEM). From the survey, it was found that most of the respondents are exposed to higher noise levels and are facing health issues of “pain in the ear,” “rise in blood pressure,” “loss of sleep,” “whistling and buzzing” in their ear, “headache,” “heaviness” and “efficiency problem.” A total of 109 hypotheses were proposed and analyzed through bootstrapping with a subsample size of 5000 in SmartPLS software. 18 hypotheses were found to be significant in the proposed model. SEM analysis revealed an interrelation between noise pollution and health effects. It is recommended that strict regulation in nearby sensitive areas must be imposed and an awareness drive on a large scale shall be conducted to enlighten the city’s population regarding noise effects as well as various measures for controlling.

Ozone is a hazardous gas for the environment and negatively affects plant and human health. These days, phytoextracts are commonly used as a source of bioactive compounds for reducing the detrimental environmental effects on plants. In the presented study, soybean cultivar JS-335 was used to assess the protective role of synthetic ascorbic acid (SAA) and orange juice (25% orange juice, enriched ascorbic acid) under ozone stress conditions. The results showed that under ozone stress, soybean cultivar JS-335 reduced growth and biomass and negatively affected the biochemical properties of plants due to these changes, finally causing yield losses. Foliar-applied OJ >and SAA improved plant growth and development and increased crop yield. It was discovered that a 25% OJ coupled with ascorbic acid and other essential nutrients and biomolecules was almost as effective as a 100 ppm SAA in reducing the harmful effects of ozone stress on soybean plants. As a result, it was determined that OJ, a less expensive source of ascorbic acid, can improve ozone resistance in plants in ozone-prone areas.

The present study analyzed the spatio-temporal variations in the Land Use Land Cover types within Ranipet Municipal town in Ranipet District, Tamil Nadu State, India, using two different platforms (QGIS and IDRISI Selva v.17.0). The possible parameters driven the net changes in the Land Use Land Cover (LULC) types were also incorporated for the analysis. Results revealed the positive net changes in the built-up area are about 26.8%, and combined other classes like vegetation, barren land, and water bodies have net negative changes during 1997-2019. Particularly barren land was found to have a reduction of 17.4% due to the massive industrialization in the study area. Further, the LULC maps were used for future prediction (2029) using the dynamic models of CA-ANN (Cellular Automata and Artificial Neural Network) and CA-Markov. Predicted maps yielded a kappa index of 81.6% and 82.6% for CA-ANN and CA-Markov, representing their respective accuracy levels. The CA-Markov model is extended for determining the probable long-term changes for 2080 in LULC with a kappa index of 76.2%. Compared to the CA-ANN model using the QGIS platform, CA-Markov provided better analysis, particularly from one cell to the other. According to the survey and the ground truth in the locality, industrialization and occupational shift were the most influential drivers of LULC dynamics. Moreover, the results of this study assist the stakeholders in the decision-making process for future sustainable land use management.

Plastic needs have expanded along with population growth, industrialization, and urbanization. Plastic is unrivaled due to its useful properties and is used to prepare numerous important goods daily. This paper encloses the different kinds and applications of petroleum-based plastic and the drawbacks related to their use, i.e., its nonbiodegradability which leads to their stay in the environment for a very long time. Additionally, there are not enough effective disposal techniques for the large volume of plastic waste produced; thus, plastic garbage builds up in the environment and endangers it. Limiting the usage of plastic is necessary to protect the environment. This can be done with the help of bioplastic, which is an excellent substitute for plastic. The different kinds of bioplastic and their biodegradability in different mediums, viz., soil compost and aquatic systems, are addressed in this paper. Along this, the different areas of application of bioplastic have been explored. The present study also addresses the underlying mechanism of plastic polymerization and biodegradation and the current status of bioplastics in the global market.

The water, food, and energy demands are the basic requirements of society. These demands are increasing daily due to an increase in population or lifestyle changes. To fulfill these ever-increasing demands, several water resource projects have come up which require the storage or diversion of river water. These interventions have caused widespread degradation of aquatic ecosystems. Due to the degradation of the aquatic ecosystem, several programs all around the globe began. In this series, Brisbane Declaration (2007) provided a more holistic definition of Environmental Flows (EFs) as the quantity, timing, duration, frequency, and quality of flows required to sustain freshwater, estuarine and near-shore ecosystems and the human livelihoods and well-being that depend on them. The present study was envisaged to assess for environmental flows of the Tawi river with a major objective of assessing the environmental flows of the Tawi river using the Global Environmental Flow Calculator developed by IWMI. The method provides E-Flows for different Environmental Management Classes. For the western Himalayan region, the river stretches in Environmental Management Class ‘B’ and ‘C’. The assessment provides E-Flows in two ways: (i) the percentage of Mean Annual Runoff and (ii) average monthly environmental flows. E-Flows were estimated as 42.34% to 56.96% of Mean Annual Runoff and varied from 5.73 cumecs during November to 68.23 during August.

Pollution abatement and flood control activities require effective water resource planning, engineering assessment, sophisticated technology, and appropriate hydraulic structure designs. This paper x-rays flood mitigation and pollution abatement strategies that can be adopted in the Kaduna metropolis in Nigeria. Analytical hierarchy process of design, questionnaires, engineering assessment approach, and standard method for estimation of the runoff discharge was adopted for this research. Estimating water balance components and QSWAT Hydrological Model can be used with the QGIS interface for a greener environment. Suitable hydraulic systems were designed for long-term flood control in the River Kaduna catchment area through an analytic hierarchy Process. Statistical analysis, manning equations, and rational methods were utilized for adequate assessment and planning. The hydraulic discharge capacity of culverts, open channels, and other hydraulic structures was carefully checked. Flooding greatly impacts infrastructural development, and inadequate drainage systems contribute to it. Mitigation strategies, adequate water resource planning, and management will greatly benefit from addressing flood-related issues in the study area. This research provides information on the flood vulnerability of infrastructures and mitigation strategies that can be adopted in the study area. Viable policies and management strategies can be utilized to avert losses traceable to floods in developing and developed countries.