This study investigated the effects of pollution emissions on the bioreactivity of PM2.5 during Asian dust periods. PM2.5 during the sampling period were 104.2 and 85.7 μg m−3 in Xi'an and Beijing, respectively, whereas PM2.5 which originated from the Tengger Desert was collected (dust background). Pollution conditions were classified as non-dust days, pollution episode (PE), dust storm (DS)-1, and DS-2 periods. We observed a significant decrease in cell viability and an increase in LDH that occurred in A549 cells after exposure to PM2.5 during a PE and DS-1 in Xi'an and Beijing compared to Tengger Desert PM2.5. Positive matrix factorization was used to identify pollution emission sources. PM2.5 from biomass and industrial sources contributed to alterations in cell viability and LDH in Xi'an, whereas vehicle emissions contributed to LDH in Beijing. OC, EC, Cl−, K+, Mg2+, Ca, Ti, Mn, Fe, Zn, and Pb were correlated with cell viability and LDH for industrial emissions in Xi'an during DS. OC, EC, SO42−, S, Ti, Mn, and Fe were correlated with LDH for vehicle emissions in Beijing during DS. In conclusion, the dust may carry pollutants on its surface to downwind areas, leading to increased risks of particle toxicity.

Nitrogen oxide (NOx) emissions from flue gas lead to a series of environmental problems. Biological removal of Nitrogen oxide (NOx) from flue gas by microalgae is a potential approach for reducing the problems caused by these emissions. However, few microalgal strains are reported to remove NOx from flue gas. Here, a microalga strain PF3 (identified as Scenedesmus obliquus), which can remove NOx and fix CO₂ from flue gas is isolated. The tolerance of Scenedesmus obliquus PF3 to CO₂, NO, SO₂ and its adaptabilities to environmental factors (pH and temperature), and its performance in the removal of NO and CO₂ are investigated. Scenedesmus obliquus PF3 showed biomass accumulation when sparged with 15% CO₂ or 500 ppm NO or 50 ppm SO₂, and bisulfite less than 2 mM showed no toxicity to Scenedesmus obliquus PF3. Additionally, PF3 grew well in a wide range of pH and temperatures from 4.5 to 10.5 and 15 °C–30 °C, respectively. When sparged with simulated flue gas (100 ppm NO, 10% CO₂, (N₂ as balance gas)), the microalgae culture system removed NO and CO₂ at a rate of 2.86 ± 0.23 mg L⁻¹ d⁻¹ and 1.48 ± 0.12 g L⁻¹ d⁻¹, respectively, where up to 96.9 ± 0.03% (2.77 ± 0.08 mg L⁻¹ d⁻¹) and 87.7 ± 6.22% (1.29 ± 0.01 mg L⁻¹ d⁻¹) of the removed NO and CO₂, respectively, were assimilated in algal biomass. These results suggest that Scenedesmus obliquus PF3 is a promising candidate for NOx removal and carbon fixation of flue gas.

Epidemiological studies and animal experiments have suggested that exposure to Di-(2-ethylhexyl) phthalate (DEHP) is strongly associated with an increase in blood pressure. However, the mechanisms that result in the detrimental effects of DEHP exposure on blood pressure are unclear. In our study, mice were orally exposed to DEHP dosages of 0.1, 1, 10 mg/kg/day for 6 weeks. The results showed that DEHP could induce a significant increase in systolic blood pressure (SBP) and heart rate, and a significant thickening of the ventricular wall. To explore the underlying mechanism, we measured the level of: angiotensin converting enzyme (ACE); bradykinin B2 receptor (BK2R); endothelial nitric oxide synthase (eNOS); bradykinin and Ca²⁺ in cardiac cytoplasm as well as in serum nitric oxide (NO). The results suggested that DEHP could induce an increase in ACE levels, and a decrease in bradykinin levels. Moreover, BK2R, Ca²⁺, eNOS and NO decreased when mice were exposed to 10 mg/kg/day DEHP. Interestingly, 5 mg/kg/day angiotensin converting enzyme inhibitor (ACEI) treatment inhibited the increase in blood pressure, and inhibited the decrease in the levels of BK2R, Ca²⁺, eNOS, and NO, that were induced by DEHP exposure. Our results suggest that DEHP might increase blood pressure by activating ACE expression, and inhibiting the bradykinin-NO pathway.

The measurement of aerosols (PM₁.₀ and PM₂.₅) was conducted during 2016 and 2017 in Beijing, Tangshan and Shijiazhuang, investigating the spatial and temporal variations of aerosols and major chemical components. The WRF-Chem model was applied to simulate the impacts of aerosol direct and semi-direct feedbacks on meteorological factors and identify the source of PM₂.₅. The results showed that the average annual concentrations were 63.3–88.7 μg/m³ for PM₁.₀ and 81.3–112 μg/m³ for PM₂.₅ at the three study cities, and the average seasonal concentration ratios of PM₁.₀/PM₂.₅ ranged from 64.3% to 86.0%. PM₁.₀ and PM₂.₅ showed a good correlation that the squared correlation coefficients were all higher than 0.9, indicating both mainly came from the same emission sources. Water-soluble inorganic ions and carbonaceous components were major chemical species in PM₁.₀ and PM₂.₅, accounting for 48.9%–54.1% and 25.6%–27.8% in PM₁.₀, 48.1%–52.3% and 22.7%–24.7% in PM₂.₅. Those chemical species showed spatially similar characteristics but pronounced seasonal differences, with higher concentrations in autumn and winter, lower in spring and summer. Aerosol feedbacks had different effects on various meteorological factors. Three study cities monthly-mean incoming solar radiation decreased by 40.6 W/m², 82.2 W/m², 38.4 W/m², and 49.9 W/m²; planetary boundary layer height reduced by 54.0 m, 109 m, 32.2 m and 85.2 m; temperature at 2 m decreased by 0.5 °C, 0.8 °C, 0.5 °C and 1.3 °C; relative humidity increased by 1.5%, 2.6%, 1.3% and 4.7% in April, July, October and January, respectively, while wind speed changes were relatively smaller than above factors. Additionally, the major sources of PM₂.₅ in January were identified as transportation in Beijing, while industrial and domestic sources in Tangshan and Shijiazhuang. The obtained results will provide more in-depth and comprehensive understanding of aerosol pollution and management strategies.

Coexistence of antibiotics/heavy metals and the overexpression of resistance genes in the vermicompost has become an emerging environmental issue. Little is known about the interaction and correlation between chemical pollutants and biological macromolecular compounds. In this study, three typical vermicompost samples were selected from the Yangtze River Delta region in China to investigate the antibiotic, heavy metal and corresponding antibiotic resistance genes (ARGs) and heavy metal resistance genes (HRGs). The results indicated the prevalence of tetracycline (TC), copper (Cu), zinc (Zn), cadmium (Cd), corresponding TC-resistance genes (tetA, tetC, tetW, tetM, tetO, and tetS) and HRGs (copA, pcoA, cusA, czcA, czcB, and czcR) in the three vermicompost samples. In addition, the ARG level was positively associated with the water-soluble TC fraction in the vermicompost, and it was same between the HRG abundance and exchangeable heavy metal content (p < 0.05). Moreover, a positive correlation was found between ARG and HRG abundance in the vermicompost samples, suggesting a close regulation mechanism involving the expression of both genes. The result obtained here could provide new insight into the controlling risk of heavy metals, TC, and relevant resistance genes mixed contamination in the vermicompost.

A new carboxylate-functionalized hydrochar (CFHC) was successfully prepared by reaction of hydrochar with maleic anhydride under solvent-free conditions and followed by deprotonating carboxyl group of hydrochar with NaHCO₃ solution. CFHC was characterized using X-ray photoelectron spectroscopy (XPS), elemental analysis (EA), zeta potential, Brunauer-Emmett-Teller surface area (BET) and Fourier-transform infrared spectroscopy (FTIR), and its adsorption properties and mechanisms to methylene blue (MB) and Cd(II) were investigated using the batch method. The isotherm adsorption data were accorded with Langmuir model and the maximum uptakes were 1155.57 and 90.99 mg/g for MB and Cd(II) at the temperature of 303 K, respectively. The joint analysis of batch experiments and characterizations of hydrochar confirmed the π-π interaction was accompanied by electrostatic interaction and hydrogen bond for MB adsorption, while the surface complexation and ion exchange were predominant mechanisms for Cd(II) adsorption. Therefore, a highly effective adsorbent CFHC prepared by a simple and environmentally friendly solid-phase synthesis is a promising candidate for wastewater treatment.

Dissolved organic carbon (DOC) has a major influence upon sorption/desorption and transport of hydrophobic organic contaminants (HOCs) in soil environments. However, the molecular mechanisms of DOC sorption and its effects on aged HOC desorption in contaminated soils still remain largely unclear. Here, effects of three different DOC (one from commercial peat and two from biochars produced at 300 °C and 500 °C pyrolysis temperatures, respectively) and oxalate (as a reference) on abiotic desorption behavior of aged phenanthrene from three agricultural soils were investigated. Results showed that desorption of aged phenanthrene from soils was predominantly dependent on soil organic carbon content. The presence of DOC and oxalate resulted in higher desorption of phenanthrene compared to water alone, and the effects were positively related to soil organic carbon content and DOC/oxalate concentration. The facilitating effects of DOC were further increased during the second consecutive desorption, whereas oxalate had no such effect. Ultra-high-resolution Fourier transform-ion cyclotron resonance-mass spectrometry confirmed the molecular fractionation of DOC at the soil-water interface during DOC sorption. Specifically, the DOC molecules with O-rich moieties were preferentially adsorbed, whereas the molecules with phenolic and aromatic structures were selectively retained in the soil solutions through competitive displacement and co-sorption reactions during sorption. The enriched phenyl structures in the retained DOC facilitated its association with phenanthrene in the solutions and thus the release of phenanthrene from the soils. In contrast, oxalate replaced some organic carbon from the soils and thus released the associated phenanthrene into the solutions. Our findings highlight the importance of the molecular composition and structure of DOC for the desorption of phenanthrene in soil-water environments, which may help improve our understanding of the release and transport of organic compounds in the environments.

In this study, carbon nanotube-based adsorbents, oxidized multi-walled carbon nanotube (OMWCNT) with non-magnetic property and OMWCNT-Fe₃O₄ and OMWCNT-κ-carrageenan-Fe₃O₄ nanocomposites with magnetic property, having different structural and surface properties were prepared and their adsorptive properties for the removal of toxic diquat dibromide (DQ) herbicide from water by adsorption were determined in detail. For each adsorption system, the effects of initial DQ concentration, contact time and temperature on the adsorption processes were determined. Equilibrium time was found to be 300 min for DQ solutions. OMWCNT showed faster adsorption and higher maximum adsorption capacity value than magnetic adsorbents. With increasing initial herbicide concentration from 5.43 mg.L⁻¹ to 16.3 mg.L⁻¹, the values of initial sorption rate exhibited a decrease from 29.1 mg.g⁻¹.min⁻¹ to 4.28 mg.g⁻¹.min⁻¹ for OMWCNT-DQ system, from 1.21 mg.g⁻¹.min⁻¹ to 0.823 mg.g⁻¹.min⁻¹ for OMWCNT-Fe₃O₄-DQ system and from 0.674 mg.g⁻¹.min⁻¹ to 0.612 mg.g⁻¹.min⁻¹ OMWCNT-κ-carrageenan-Fe₃O₄ system. Maximum adsorption capacity value of OMWCNT was approximately 2.8-fold higher than magnetic OMWCNT-Fe₃O₄ and 5.4-fold higher than magnetic OMWCNT-κ-carrageenan-Fe₃O₄ at 25 °C. Adsorption kinetic and isotherm data obtained for all adsorption systems were well-fitted by pseudo second-order and Langmuir models, respectively. Thermodynamic parameters indicated that the adsorption of DQ onto carbon nanotube-based adsorbents was spontaneous and endothermic process. Furthermore, OMWCNT having the highest herbicide adsorption capacity could be regenerated and reused at least five times. This study showed that carbon nanotube-based adsorbents with magnetic and non-magnetic property were of high adsorption performance for the removal of DQ from water and could be promising adsorbent materials for the efficient removal of herbicides from wastewaters.

Plastic pollution is prevalent worldwide and affects marine wildlife from urbanized beaches to pristine oceanic islands. However, the ecological basis and mechanisms that result in marine animal ingestion of plastic debris are still relatively unknown, despite recent advances. We investigated the relationship between scavenging behavior and plastic ingestion using green turtles, Chelonia mydas, as a model. Diet analysis of C. mydas showed that sea turtles engaging in scavenging behavior ingested significantly more plastic debris than individuals that did not engage in this foraging strategy. We argue that opportunistic scavenging behavior, an adaptive behavior in most marine ecosystems, may now pose a threat to a variety of marine animals due to the current widespread plastic pollution found in oceans.

Organophosphate esters (OPEs) and phthalate esters (PAEs) are extensively used as additives in commercial and household products. However, knowledge on human exposure to OPEs and PAEs remains limited in China. This study aimed to investigate OPE and PAE metabolites in urine samples of primiparas and to evaluate the cumulative risk of OPE and PAE exposure. A total of 8 OPE metabolites and 11 PAE metabolites were measured in urine samples of 84 primiparas from Shenzhen, China. The OPE metabolites were found in at least 72% of the urine samples with bis(2-chloroethyl) phosphate (BCEP) being the dominant analogue. Among the 11 PAE metabolites, mono-n-butyl phthalate (mBP) was the most abundant analogue and had a median concentration (139 μg/L) greater than those reported in urine samples from other countries and regions. A significant, positive correlation was found between Σ₈OPEMs (the sum of 8 OPE metabolites) and body mass index (BMI). The urinary concentration of Σ₁₁PAEMs (the sum of 11 PAE metabolites) was positively associated with the time of computer using by the primiparas. The estimated daily intakes (EDI) of tris(2-chlorethyl) phosphate (TCEP, the parent chemical of BCEP) and di-n-butyl phthalate (DnBP, the parent chemical of mBP) were determined to be 0.47 and 9.14 μg/kg bw/day, respectively. The 95th percentile EDI values for TCEP and DnBP both exceeded their corresponding reference doses. Twelve and fifty-five percentage of the primiparas were estimated to have HIRfD (hazard index corresponding to reference doses) and HITDI (hazard index corresponding to tolerable daily intake) values exceeding 1 for OPEs and PAEs, respectively, suggesting a relatively high exposure risk.