Dredged river sediments and biosolids used as amendments for agricultural purposes can provide a suitable plant growth medium, a topsoil substitute. Nevertheless, trace metal bioaccumulation and risk of plant toxicity remains a concern. We conducted a greenhouse experiment to evaluate the plant growth and trace metal bioaccumulation on sediments and biosolid mixtures. These included dredged sediment from the Peoria Lakes portion of the Illinois River and class A biosolids from the Metropolitan Water Reclamation District of Greater Chicago. Six different mixtures were produced in addition to a standard greenhouse mix serving as a control. Barley (Hordeum vulgare) and snap bean (Phaseolus vulgaris) were grown on the mixtures in the greenhouse. Plants grew in all treatments, except for snap beans that were stunted likely by high salt content in unleached biosolid mixtures. The highest overall biomass production for barley was obtained in the treatment composed of 50% sediment and 50% biosolids. For snap bean, the highest biomass productions were obtained in treatments composed of ≤50% biosolids in the mixture. Trace metals in plant tissue were within ranges considered normal, except for Mo in snap bean, which was at a level considered excessive. However, addition of biosolids to sediments decreased Mo plant uptake. Based on our results, sediments mixed with biosolids make a fertile topsoil and have no inherent chemical or physical properties that would preclude its use as a plant growth medium. Adding sediments to unleached fresh biosolids improved plant growth and diminished trace metal uptake. The suggested optimal ratio of sediments to biosolids would be 80:20 to 70:30 by volume in most situations.

An experimental approach for estimating the parameters for an extended biokinetic model (Peev et al. 2004) of micropollutant removal in wastewater treatment is presented and exemplarily performed with 2,6-naphthalene disulfonate (2,6-NDSA) and benzothiazole sulfonate (BTSA) as model compounds. In particular, a set of short-term batch experiments, consisting of a micropollutant degradation experiment and a biomass decay experiment, were carried out. Both experiments comprise only the chemical analysis of micropollutant substrate concentrations over time. The experimental data were used to determine the biokinetic parameters by applying and verifying the methodology introduced in a previous publication (Schoenerklee and Peev, 2008). The results suggest that the model assumption of competent heterotrophic biomass utilizing the target micropollutant as growth substrate, gives a satisfactory description of the micropollutant biodegradation process by mixed bacterial cultures.

Background, aim and scope Opposite interests must coexist in coastal areas: the presence of significant cities and urban centres, of touristic and recreational areas, and of extensive shellfish farming. To avoid local pollution caused by treated wastewaters along the Northern Adriatic coast (Friuli Venezia-Giulia and Veneto regions), marine outfall systems have been constructed. In this study, the application of a numerical dispersion model is used to support the traditional monitoring methods in order to link information concerning the hydrodynamic circulation and the microbiological features, to evaluate possible health risks associated with recreational and coastal shellfish farming activities. The study is a preliminary analysis of the environmental impact of wastewater treatment plants (WWTPs) with submarine discharge outfalls. It also could be useful for the water profile definition according to the Directive 2006/7/EC on the quality of bathing water and for the integrated areal analysis (Ostoich et al. 2006), to define the area of influence of each submarine discharge point. Materials and methods Historical data on discharges of the considered WWTPs were recovered and evaluated. Data on discharges' control for Veneto region (WWTPs of Lido and Cavallino) were produced by the WWTPs' manager Veritas Laboratory service, while data for the WWTPs of Friuli Venezia-Giulia region were produced by the regional environmental protection agency in the institutional control activity following official methods. The hydrodynamic model used in this work is the three-dimensional version of the finite element model SHYFEM, developed at ISMAR-CNR (Marine Science Institute of the Italian National Research Council) in Venice (Umgiesser et al. J Mar Syst 51:123-145, 2008). Results and discussion Numerical simulations have been carried out with the 3D version of the finite element model SHYFEM for 3 months during autumn 2007 to evaluate the bacterial pollution dispersion along the coasts of Veneto and Friuli Venezia-Giulia regions, prescribing meteo-marine forcings and concentration values at the points corresponding to the positions of the submarine outfalls. Model results show that during autumn 2007 the discharges of the submarine outfalls of the Venice province seem to have no impact on the surface water quality, while there are some visible effects in the Gulf of Trieste. This reflects the behaviour of the experimental data collected by ARPAV and ARPA FVG and monitoring campaigns both on water and shellfish quality. Further results have been elaborated to identify the area of influence of each discharge point; scenarios were developed with imposed concentrations. The results seem to highlight that the two discharges of the Veneto region are not noticeable, while the discharges of the Gulf of Trieste (in particular the Servola and Barcola ones) are perceptible. Conclusions This study represents a new step towards the study of the microbiological pollution dispersion and impact due to the discharges of the submarine outfalls of the Veneto and Friuli Venezia-Giulia regions (nine considered discharge points). With the 3D version of the finite element model SHYFEM, the information obtained from the hydrodynamic circulation has been linked to the classical methods of analysis, to assess possible risks connected to the microbiological parameter Escherichia coli. Recommendations and perspectives In future studies the time scale for microbiological parameters' decay could be linked to various environmental parameters such as light climate, temperature, and salinity. Interesting information would come from the study of new scenarios with different configurations of the discharge of the pipelines and/or the treatment plants and in particular from the improvements of the 3D version of the SHYFEM model, to take the stratification process into account which occurs during spring-summer, since the Northern Adriatic Sea is a very complex ecosystem, both as physical and ecological processes.

Purpose As one component of the German ecological environment observation, the Environmental Specimen Bank program was initiated in the mid-1980s. Under the program, representative specimens of marine, fresh water, and terrestrial ecosystems are sampled regularly and archived under chemically stable conditions. An initial characterization of the samples provides data regarding the status quo of the respective ecosystems. The aim of the present publication is to give insight into these real-time monitoring data, which have been generated for the last 10 to 20 years. This is done exemplarily for the heavy metals cadmium (Cd), mercury (Hg), and lead (Pb) in marine specimens of the Baltic and the North Sea. Methods Bladder wrack (Fucus vesiculosus), blue mussel (Mytilus edulis), eelpout (Zoarces viviparus), and eggs of herring gulls (Larus argentatus) were sampled at one location in the Baltic Sea and at two sites in the North Sea (Schleswig-Holstein Wadden Sea and Lower Saxony Wadden Sea). Annual samples were pooled, homogenized, and analyzed for a set of elements. Cd and Pb were quantified after freeze-drying and microwave digestion using inductively coupled plasma-mass spectrometry. Total Hg in freeze-dried samples was determined by atomic absorption spectrometry using a direct mercury analyzer. Results Time series data covering up to two decades revealed comparable cadmium levels at all three locations. Concentrations in bladder wrack ranged between 0.10 and 0.37 µg/g on a wet weight basis (ww). Respective values for blue mussel and eelpout liver were 0.07-0.29 and 0.01-0.10 µg/g ww. Herring gull eggs were not included in cadmium analyses. Declining trends were observed in North Sea bladder wrack and mussels, eelpout from the Lower Saxony site, and mussels from the Baltic Sea. Upward trends were apparent in eelpout from the Schleswig-Holstein location. Mercury concentrations in Baltic Sea specimens ranged from 1.1-2.7 ng/g ww in bladder wrack to 2.6-5.1, 26-52, and 86-226 ng/g ww in blue mussel, eelpout muscle, and herring gull eggs, respectively. No temporal trends were observed. North Sea bladder wrack had accumulated 5.4-24 ng/g ww Hg. The respective Hg values for blue mussel and eelpout muscle were 19-64 and 73-187 ng/g ww. Highest Hg contents were detected in herring gull eggs (90-1,100 ng/g ww). Declining trends of Hg were observed in herring gull eggs at both North Sea locations and in blue mussels at the Lower Saxony site. Lead concentrations in Baltic Sea specimens were 48-222 ng/g ww in bladder wrack, 85-189 ng/g ww in blue mussel, 2.0-9.5 and 10-42 ng/g ww in eelpout muscle and liver, and 2.7-26 ng/g ww in herring gull eggs. In the North Sea, Pb concentrations were as follows: 68-397 ng/g ww in bladder wrack, 101-507 ng/g ww in blue mussels, 2.6-35 and 5.9-158 ng/g ww in eelpout muscle and liver, and 3.5-55 ng/g ww in herring gull eggs. Highest Pb-levels were found at the Lower Saxony site. Declining Pb-trends were observed in bladder wrack from the Baltic Sea; in bladder wrack and mussel at the Schleswig-Holstein location; and in bladder wrack, mussels, eelpout liver, and herring gull eggs at the Lower Saxony site. Conclusions During the 10 to 20 years of monitoring, reliable data were obtained which allow a good insight into metal contamination of marine biota. Assessment of the data according to OSPAR criteria (OSPAR 2005) revealed cadmium levels above the derived background concentrations in mussels of all three sites. Mercury levels above background concentrations were found at both North Sea locations, whereas only mussels at the Lower Saxony site had Pb concentrations above the reference value. Archived specimens are available for further analyses and questions which may arise in the future (speciation of elements, metallomics).

Concept and purpose Virtually all water treatment facilities worldwide generate an enormous amount of water treatment residual (WTR) solids for which environmentally friendly end-use options are continually being sought as opposed to their landfilling. Aluminium-based WTR (Al-WTR) can offer huge benefits particularly for phosphorus (P) removal and biofilm attachment when used as media in engineered wetlands. However, potential environmental risks that may arise from the leaching out of its constituents must be properly evaluated before such reuse can be assured. This paper presents results of an assessment carried out to monitor and examine the leachability and leaching patterns of the constituents of an Al-WTR used as media in laboratory-scale engineered wetland systems. Main features, materials and methods Al-WTR was used as media in four different configurations of laboratory-scale engineered wetland systems treating agricultural wastewater. Selected metal levels were determined in the Al-WTR prior to being used while levels of total and dissolved concentration for the metals were monitored in the influent and effluent samples. The increase or decrease of these metals in the used Al-WTR and their potential for leaching were determined. Leached metal levels in the effluents were compared with relevant environmental quality standards to ascertain if they pose considerable risks. Results Aluminium, arsenic, iron, lead and manganese were leached into the treated effluent, but aluminium exhibited the least leaching potential relative to its initial content in the fresh Al-WTR. Levels of P increased from 0.13 mg-P/g (fresh Al-WTR) to 33.9-40.6 mg-P/g (used Al-WTR). Dissolved levels of lead and arsenic (except on one instance) were below the prescribed limits for discharge. However, total and dissolved levels of aluminium were in most cases above the prescribed limits for discharge, especially at the beginning of the experiments. Conclusions, recommendations and perspectives Overall, the study indicates that leaching is observed when Al-WTR is beneficially reused for enhanced P removal in engineered wetlands. In particular, levels of aluminium in the treated effluent beyond the prescribed limits of 0.2 mg/l were observed. However, since the results obtained indicate that aluminium leached is mostly associated with solids, a post-treatment unit which can further reduce the level of aluminium in the treated effluent by filtering out the solids could serve to mitigate this. In addition, plants used in such wetland systems can uptake metals and this can also be a potential solution to ameliorating such metal releases. Periodic monitoring is thus advised. Notwithstanding, the use of Al-WTR as a media in engineered wetlands can serve to greatly enhance the removal of P from wastewaters and also serve as support material for biofilm attachment.

Background, aim, and scope Arthropods, with over a million species described, are ubiquitous throughout different environments. Knowledge of their responses to human impact is crucial for understanding and predicting changes in ecosystem structure and functions. Our aim was to investigate the general patterns and to identify sources of variation in changes of the diversity, abundance and fitness of terrestrial arthropods (including Arachnida, Collembola and Insecta) in habitats affected by point polluters. Main features We found 134 suitable studies which were published between 1965 and 2007. These data came from impact zones of 74 polluters in 20 countries with the largest representation from Russia (28 polluters), Poland (12 polluters) and the USA (six polluters). The database allowed calculation of 448 effect sizes (i.e. relative differences between measurements taken from polluted and control sites) on the effects of various point polluters like non-ferrous industries, aluminium plants, cement, magnezite, fertilising and chemical plants, power plants, iron- and steel-producing factories. We used meta-analysis to search for general effects and to compare between polluter types and arthropod groups, and linear regression to describe the latitudinal gradient and to quantify relationships between pollution and arthropod responses. Results The overall effect of pollution on arthropod diversity did not differ from zero. However, species richness of soil arthropods (both living on the soil surface and within the soil) tended to decrease, and species richness of herbivores to increase, near point polluters. Abundance of terrestrial arthropods near point polluters decreased in general. This decrease resulted from strong adverse effects on soil arthropods, especially on decomposers and predators. Densities of herbivores increased, but a number of research biases that we discovered in published data may have led to overestimation of the latter effect. The dome-shaped density pattern along pollution gradients was discovered only in 5% of data sets. Among herbivores, only free-living defoliators and sap-feeders demonstrated higher densities in polluted sites; the effects of pollution on other guilds were not significant. Near the polluters, conifers suffered higher increase in damage from herbivores than deciduous woody plants and herbs. Overall effect of pollution on arthropod performance was negative; in particular, individuals from polluted sites were generally smaller than individuals from control sites. This negative effect weakened with increase in duration of the pollution impact, hinting evolution of pollution resistance in populations inhabiting polluted sites. Stepwise regression analysis demonstrated that pollution-induced changes in both the density and performance of arthropods depended on climate of the locality. Negative effects on soil fauna increased with increase in annual precipitation; positive effects on herbivore population density increased with increases in both mean July temperature and annual precipitation. Discussion We detected effects of research methodology on the outcome of published studies. Many of them suffer from research bias—the tendency to collect data on organisms or under conditions in which one has an expectation of detecting significant effects. Pseudoreplicated studies (one polluted site contrasted to one control site) frequently reported larger effects than replicated studies (several polluted sites contrasted with several control sites). These methodological flaws especially influenced herbivory studies; we conclude that increase in herbivory in both heavily and moderately polluted habitats is not as frequent as it was earlier suggested. In contrast, the decrease in abundance of predators is likely to be a widespread phenomenon. Thus, our analysis supports the hypothesis that pollution may favour herbivore populations by creating an enemy-free space. Consistent declines in abundance of soil arthropods in impact zones of different polluters suggest that this group can potentially be used in bioindication of pollution-induced changes in terrestrial ecosystems. Conclusions Main effects of pollution on arthropod communities (decreased abundance of decomposers and predators and increased herbivory) may have negative consequences for structure and services of entire ecosystems. Responses of arthropods to pollution depend on both temperature and precipitation in such a way that ecosystem-wide adverse effects are likely to increase under predicted climate change. Recommendations and perspectives Our analysis confirmed that local severe impacts of industrial enterprises on biota are well-suited to reveal the direction and magnitude of the biotic effects of aerial pollution, as well as to explore the sources of variation in responses of organisms and communities. Although we analysed the effects of point polluters, our conclusions can be applied to predict consequences of pollution impacts on regional and even global scales. We argue that possible interactions between pollution and climate should be accounted for in the analyses of global change impacts on biota.

Background, aim, and scope Primitive wax refining techniques had resulted in almost 50,000 tonnes of acidic oily sludge (pH 1-3) being accumulated inside the Digboi refinery premises in Assam state, northeast India. A novel yeast species Candida digboiensis TERI ASN6 was obtained that could degrade the acidic petroleum hydrocarbons at pH 3 under laboratory conditions. The aim of this study was to evaluate the degradation potential of this strain under laboratory and field conditions. Materials and methods The ability of TERI ASN6 to degrade the hydrocarbons found in the acidic oily sludge was established by gravimetry and gas chromatography-mass spectroscopy. Following this, a feasibility study was done, on site, to study various treatments for the remediation of the acidic sludge. Among the treatments, the application of C. digboiensis TERI ASN6 with nutrients showed the highest degradation of the acidic oily sludge. This treatment was then selected for the full-scale bioremediation study conducted on site, inside the refinery premises. Results The novel yeast strain TERI ASN6 could degrade 40 mg of eicosane in 50 ml of minimal salts medium in 10 days and 72% of heneicosane in 192 h at pH 3. The degradation of alkanes yielded monocarboxylic acid intermediates while the polycyclic aromatic hydrocarbon pyrene found in the acidic oily sludge yielded the oxygenated intermediate pyrenol. In the feasibility study, the application of TERI ASN6 with nutrients showed a reduction of solvent extractable total petroleum hydrocarbon (TPH) from 160 to 28.81 g kg⁻¹ soil as compared to a TPH reduction from 183.85 to 151.10 g kg⁻¹ soil in the untreated control in 135 days. The full-scale bioremediation study in a 3,280-m² area in the refinery showed a reduction of TPH from 184.06 to 7.96 g kg⁻¹ soil in 175 days. Discussion Degradation of petroleum hydrocarbons by microbes is a well-known phenomenon, but most microbes are unable to withstand the low pH conditions found in Digboi refinery. The strain C. digboiensis could efficiently degrade the acidic oily sludge on site because of its robust nature, probably acquired by prolonged exposure to the contaminants. Conclusions This study establishes the potential of novel yeast strain to bioremediate hydrocarbons at low pH under field conditions. Recommendations and perspectives Acidic oily sludge is a potential environmental hazard. The components of the oily sludge are toxic and carcinogenic, and the acidity of the sludge further increases this problem. These results establish that the novel yeast strain C. digboiensis was able to degrade hydrocarbons at low pH and can therefore be used for bioremediating soils that have been contaminated by acidic hydrocarbon wastes generated by other methods as well.

Introduction Isotope ratios of lead (²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb) in Japanese women's hair of the twentieth century were measured to evaluate lead contamination of human proximate environment of those days. Materials and Methods The historic hair samples (n = 40) were collected in 1980s by staffs of Department of Human Ecology, University of Tokyo, from Japanese women who cut their hair in 1910s to 1968 by themselves for hair piece or needle pad and who had stored it by the time of collection. Additional five contemporary hair samples (one from male and four from females) were also included. The hair samples were digested with HNO₃, diluted with water to Pb concentration of 10 µg/kg, and isotope ratios were measured by inductively coupled plasma mass spectrometry. Results and Discussion Isotope ratios as well as Pb concentration in the hair samples of the twentieth century varied to a considerable extent depending on the period of hair cut. The oldest hair samples (1910-1920s) had the highest concentration and the most distinct isotope ratios from those of Japanese domestic Pb indicating serious contamination of proximate environment of people of those days with Pb originated from mines in other regions of the world, probably through the usage of Pb-containing face powder. The concentration and isotope ratios of Pb decreased thereafter indicating less serious contamination of proximate environment of Japanese which, in turn, should have affected by environmental contamination of mid-twentieth century due to industrial activities and leaded gasoline. Contemporary Pb level was quite low (<1 mg/kg); however, isotope ratios were close to those in 1960s when hair concentration was assumed to be strongly affected by leaded gasoline.

PURPOSES AND AIMS: Economically efficient methods for removing arsenic from the drinking water supply are urgently needed in many parts of the world. Iron oxides are known to have a strong affinity for arsenic in water. However, they are commonly present in the forms of fine powder or floc, which limits their utility in water treatment. In this study, a novel granular adsorbent, iron-oxide-coated diatomite (IOCD), was developed and examined for its adsorption of arsenic from water. MATERIALS AND METHODS: An industrial-grade diatomite was used as the iron oxide support. The diatomite was first acidified and dried and then coated with iron oxide up to five times. The prepared IOCD samples were characterized for their morphology, composition, elemental content, and crystal properties by various instruments. Experiments of equilibrium and kinetic adsorption of As(V) on IOCD were conducted using 0.1- and 2-L polyethylene bottles, respectively, at different pH and temperatures. RESULTS: Iron oxide (α-Fe₂O₃ hematite) coated onto diatomite greatly improves (by about 30 times) the adsorption of As(V) from water by IOCD as compared to using raw diatomite. This improvement was attributed to increases in both surface affinity and surface area of the IOCD. The surface area of IOCD increased to an optimal value. However, as the IOCD surface area (93 m²/g) was only 45% higher than that of raw diatomite (51 m²/g), the enhanced As(V) adsorption resulted primarily from the enhanced association of negatively charged As(V) ions with the partial positive surface charge of the iron oxide. The As(V) adsorption decreased when the solution pH was increased from 3.5 to 9.5, as expected from the partial charge interaction between As(V) and IOCD. The adsorption data at pH 5.5 and 7.5 could be well fitted to the Freundlich equation. A moderately high exothermic heat was observed for the As(V) adsorption, with the calculated molar isosteric heat ranging from −4 to −9 kcal/mol. The observed heats fall between those for physical adsorption and chemisorption and are indicative of the formation of a series of ion-pair complexes of As(V) ions with iron oxide surface groups. CONCLUSIONS: This study demonstrated that the granular IOCD was successfully developed and employed to remove the As(V) in aqueous solution. The Freundlich isotherm well fitted the equilibrium adsorption data of As(V) onto IOCD, and both the pseudo-second-order model and the pore diffusion model simulated well the adsorption kinetics. Compared to other iron-oxide-based adsorbents reported in the literatures, the adsorption capacity of IOCD is relatively high and its kinetics is fast.

Background, aim, and scope Two new high phenol-degrading strains, Micrococcus sp. and Alcaligenes faecalis JH 1013, were isolated. The two isolates could grow aerobically in mineral salts medium containing phenol as a sole carbon source at concentration of 3,000 mg L⁻¹. It was found that the binary mixed culture of the two isolates possessed good potential for phenol removal. Material and methods Phenol biodegradation using the binary mixed culture of the two isolates was studied. The optimal conditions were determined to be temperature 32°C, pH 7.0, inoculum size 10.0%, and agitation rate 150 rpm in the synthetic wastewater. In addition, the kinetics of the cell growth and phenol degradation by the binary mixed culture were also investigated using Haldane model over a wide range of initial phenol concentrations from 20 to 2,400 mg L⁻¹. Results The experimental data indicated that the binary mixed culture had pretty high phenol degradation potential, which could thoroughly degrade the phenol in the synthetic wastewater containing phenol 2,400 mg L⁻¹ within 72 h under aerobic condition. Under the optimal conditions, the phenol concentration was reduced speedily from 1,000 to below 0.28 mg L⁻¹ in the presence of the binary mixed culture, and the phenol degradation rate reached 99.97% after 16 h. It was well below the standard value 0.28 mg L⁻¹ as described by Chinese Environmental Protection Agency. It was clear that the Haldane kinetic model adequately described the dynamic behavior of phenol degradation by the binary mixed culture with kinetic constants of q max = 0.45 h⁻¹, K sq = 64.28 mg L⁻¹, and K iq = 992.79 mg L⁻¹. The phenol concentration to avoid substrate inhibition had been inferred theoretically to be 252.62 mg L⁻¹. Conclusions Phenol, as the only carbon source, could be degraded by the binary mixed culture at high initial phenol concentrations. Phenol exhibited inhibitory behavior, and the growth kinetics of the binary mixed culture could be correlated well by the simple Haldane's inhibitory model. The kinetics parameters were invariably required for the design and simulation of batch and continuous bioreactor treating phenolic wastewaters.