Metformin is the most commonly used anti-diabetic drug in the world. When consumed, this unmetabolised pharmaceutical compound is excreted by the body and eventually enters the environment through a variety of pathways. Based on its high consumption and excretion rates, high concentrations of metformin have been detected in influents of wastewater treatment plants. Metformin and its transformation product, guanylurea, are also expected to be present in other aquatic environments based on their physico-chemical properties. Not surprisingly, guanylurea has also been detected in surface water, groundwater, and drinking water. Available information on ecotoxicological effects of metformin suggests that metformin is a potential endocrine disruptor and thus further emphasising the threat this drug could pose to our environment. This review provides a comprehensive overview of metformin and critically discusses available literature data with respect to its global use/demand, occurrence, fate and ecotoxicity in treatment facilities equipped with conventional and advanced treatment technologies, and its degradation/removal mechanisms. Final section highlights the existing knowledge gaps regarding its ultimate fate under the natural and engineered ecosystems and identifies some important research areas requiring urgent attention from regulatory makers and scientific community.

Most current-use pesticides have short half-lives in the water column and thus the most relevant exposure scenarios for many aquatic organisms are pulsed exposures. Quantifying exposure using discrete water samples may not be accurate as few studies are able to sample frequently enough to accurately determine time-weighted average (TWA) concentrations of short aquatic exposures. Integrative sampling methods that continuously sample freely dissolved contaminants over time intervals (such as integrative passive samplers) have been demonstrated to be a promising measurement technique. We conducted several modeling scenarios to test the assumption that integrative methods may require many less samples for accurate estimation of peak 96-h TWA concentrations. We compared the accuracies of discrete point samples and integrative samples while varying sampling frequencies and a range of contaminant water half-lives (t50 = 0.5, 2, and 8 d). Differences the predictive accuracy of discrete point samples and integrative samples were greatest at low sampling frequencies. For example, when the half-life was 0.5 d, discrete point samples required 7 sampling events to ensure median values > 50% and no sampling events reporting highly inaccurate results (defined as < 10% of the true 96-h TWA). Across all water half-lives investigated, integrative sampling only required two samples to prevent highly inaccurate results and measurements resulting in median values > 50% of the true concentration. Regardless, the need for integrative sampling diminished as water half-life increased. For an 8-d water half-life, two discrete samples produced accurate estimates and median values greater than those obtained for two integrative samples. Overall, integrative methods are the more accurate method for monitoring contaminants with short water half-lives due to reduced frequency of extreme values, especially with uncertainties around the timing of pulsed events. However, the acceptability of discrete sampling methods for providing accurate concentration measurements increases with increasing aquatic half-lives.

We studied mercury contamination in 25 seabird species breeding along a latitudinal gradient across the Southern Ocean, from Gough Island (40°S) through Marion Island (47°S) to Byers Peninsula (63°S). Total mercury concentrations in body feather samples of adults caught at breeding colonies from 2008 to 2011 were determined. Krill (Euphausia spp.) and other zooplankton consumers had low mercury concentrations (gentoo penguin Pygoscelis papua, chinstrap penguin Pseudomonas Antarctica, common diving petrel Pelecanoides urinatrix, broad-billed prion Pachyptila vittata; mean levels 308–753 ng g−1), whereas seabirds consuming squid or carrion had high mercury concentrations (ascending order: Kerguelen petrel Aphrodroma brevirostris, southern giant petrel Macronectes giganteus, soft-plumaged petrel Pterodroma mollis, sooty albatross Phoebetria fusca, Atlantic petrel Pterodroma incerta, northern giant petrel Macronectes halli, great-winged petrel Pterodroma macroptera; 10,720–28038 ng g−1). The two species with the highest mercury concentrations, northern giant petrels and great-winged petrels, bred at Marion Island. Among species investigated at multiple sites, southern giant petrels had higher mercury levels at Marion than at Gough Island and Byers Peninsula. Mercury levels among Byers Peninsula seabirds were low, in two species even lower than levels measured 10 years before at Bird Island, South Georgia. Replicate measurements after about 25 years at Gough Island showed much higher mercury levels in feathers of sooty albatrosses (by 187%), soft-plumaged petrels (53%) and Atlantic petrels (49%). Concentrations similar to the past were detected in southern giant petrels at Gough and Marion islands, and in northern giant petrels at Marion. There were no clear indications that timing of moult or migratory behavior affected mercury contamination patterns among species. Causes of inter-site or temporal differences in mercury contamination could not be verified due to a lack of long-term data related to species’ diet and trophic levels, which should be collected in future together with data on mercury contamination.

Over the past 20 years, global production of copper (Cu) and zinc (Zn) rank in the top three compared to other metals such as Pb, Cd, Cr, Ni, As and Hg. However, due to the potential for exposure and toxicity to humans, more attention of environmental pollution was paid to other metals such as Cd and Hg. Aquatic organisms are sensitive to Cu and Zn. Even though internal concentrations of these required elements are homeostatically controlled, toxic effects can occur at the fish gill surface. In this work, concentrations in surface waters and toxic effects of Cu, Zn, Ni, Cr, Pb, Cd, As, Hg were determined and risk of various metals in Tai Lake, China were evaluated using both risk quotients and joint probability distributions. Two transition metals, Cu and Zn posed the greatest risks to aquatic organisms while measured concentrations of other metals were less than thresholds for adverse effects. Approximately 99.9% and 50.7% of the aquatic organisms were predicted to be affected by Cu and Zn in surface water of Tai Lake respectively. Our results highlight ecological risks of Cu and Zn in water of a typical, large, urban lake in Eastern China, which was ignored in the past.

Plastic pollution is recognised as an emerging threat to aquatic ecosystems, with microplastics now the most abundant type of marine debris. Health effects caused by microplastics have been demonstrated at the species level, but impacts on ecological communities remain unknown. In this study, impacts of microplastics on the health and biological functioning of European flat oysters (Ostrea edulis) and on the structure of associated macrofaunal assemblages were assessed in an outdoor mesocosm experiment using intact sediment cores. Biodegradable and conventional microplastics were added at low (0.8 μg L−1) and high (80 μg L−1) doses in the water column repeatedly for 60 days. Effects on the oysters were minimal, but benthic assemblage structures differed and species richness and the total number of organisms were ∼1.2 and 1.5 times greater in control mesocosms than in those exposed to high doses of microplastics. Notably, abundances of juvenile Littorina sp. (periwinkles) and Idotea balthica (an isopod) were ∼2 and 8 times greater in controls than in mesocosms with the high dose of either type of microplastic. In addition, the biomass of Scrobicularia plana (peppery furrow shell clam) was ∼1.5 times greater in controls than in mesocosms with the high dose of microplastics. This work indicates that repeated exposure to high concentrations of microplastics could alter assemblages in an important marine habitat by reducing the abundance of benthic fauna.

Application of empirical models to adsorption of contaminants on natural heterogeneous sorbents is often challenging due to the uncertainty associated with fitting experimental data and determining adjustable parameters. Sediment samples from contaminated and uncontaminated portions of a study site in Maine, USA were collected and investigated for adsorption of arsenate [As(V)]. Two kinetic models were used to describe the results of single solute batch adsorption experiments. Piecewise linear regression of data linearized to fit pseudo-first order kinetic model resulted in two distinct rates and a cutoff time point of 14–19 h delineating the biphasic behavior of solute adsorption. During the initial rapid adsorption stage, an average of 60–80% of the total adsorption took place. Pseudo-second order kinetic models provided the best fit to the experimental data (R2 > 0.99) and were capable of describing the adsorption over the entire range of experiments. Both Langmuir and Freundlich isotherms provided reasonable fits to the adsorption data at equilibrium. Langmuir-derived maximum adsorption capacity (St) of the studied sediments ranged between 29 and 97 mg/kg increasing from contaminated to uncontaminated sites. Solid phase As content of the sediments ranged from 3.8 to 10 mg/kg and the As/Fe ratios were highest in the amorphous phase. High-pH desorption experiments resulted in a greater percentage of solid phase As released into solution from experimentally-loaded sediments than from the unaltered samples suggesting that As(V) adsorption takes place on different reversible and irreversible surface sites.

In this current work, the magnetic composite microsphere containing glutamine modified chitosan and silica coated Fe3O4 nanoparticles (CS-Gln-MCM) has been successfully prepared and extensively characterized, which is a kind of biodegradable materials. CS-Gln-MCM shows enhanced removal efficiency for both acid green 25 (AG25), an amphoteric dye, and mercury ions (Hg²⁺) from water in the respective while measured pH range compared with chitosan magnetic composite microsphere (CS-MCM) without modification. It is due to the fact that the grafted amino acid provides a variety of additional adsorption active sites and diverse adsorption mechanisms are involved. In AG25 and Hg²⁺ aqueous mixture, the modified adsorbents bear preferential adsorption for AG25 over Hg²⁺ in strong acidic solutions ascribed to multiple interactions between AG25 and CS-Gln-MCM, such as hydrogen bonding and electrostatic interactions. While, in weak acidic conditions, an efficient simultaneous removal is observed for different adsorption effects involved in aforementioned two pollutants. Besides, CS-Gln-MCM illuminates not only short equilibrium time for adsorption of each pollutant less than 20.0 min but also rapid magnetic separation from water and efficient regeneration after saturated adsorption. Therefore, CS-Gln-MCM bears great application potentials in water treatment.

This study is a systematic assessment of different houses and apartments, their ages and renovation status, indoors and outdoors, and in summer vs. winter, with a goal of bringing some insight into the major sources of semivolatile organic compounds (SVOCs) and their variability. Indoor and outdoor air concentrations of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and novel flame retardants (NFRs) were determined at 17–20 homes in Czech Republic in winter and summer.Indoor concentrations were consistently higher than outdoor concentrations for all compounds; indoor/outdoor ratios ranged from 2–20, with larger differences for the current use NFRs than for legacy PCBs. Seasonal trends differed according to the use status of the compounds: the PCBs had higher summer concentrations both indoors and outdoors, suggesting volatilization as a source of PCBs to air. PBDEs had no seasonal trends indoors, but higher summer concentrations outdoors. Several NFRs (TBX, PBT, PBEB) had higher indoor concentrations in winter relative to summer. The seasonal trends in the flame retardants suggest differences in air exchange rates due to lower building ventilation in winter could be driving the concentration differences.Weak relationships were found with building age for PCBs, with higher concentrations indoors in buildings built before 1984, and with the number of electronics for PBDEs, with higher concentrations in rooms with three or more electronic items. Indoor environments are the primary contributor to human inhalation exposure to these SVOCs, due to the high percentage of time spent indoors (>90%) combined with the higher indoors levels for all the studied compounds. Exposure via the indoor environment contributed ∼96% of the total chronic daily intake via inhalation in summer and ∼98% in winter.

To determine if trinitrotoluene (TNT) forms nonextractable residues in mussels (Mytilus galloprovincialis) and fish (Cyprinodon variegatus) and to measure the relative degree of accumulation as compared to extractable TNT and its major metabolites, organisms were exposed to water fortified with 14C-TNT. After 24 h, nonextractable residues made up 75% (mussel) and 83% (fish) while TNT accounted for 2% of total radioactivity. Depuration half-lives for extractable TNT, aminodinitrotoluenes (ADNTs) and diaminonitrotoluenes (DANTs) were fast initially (<0.5 h), but slower for nonextractable residues. Nonextractable residues from organisms were identified as ADNTs and DANTs using 0.1 M HCL for solubilization followed by liquid chromatography-tandem mass spectrometry. Recovered metabolites only accounted for a small fraction of the bound residue quantified using a radiotracer likely because of low extraction or hydrolysis efficiency or alternative pathways of incorporation of radiolabel into tissue.

Most of the organohalogenated contaminants (OHCs) have high environmental stability and are lipophilic in nature, thus bioaccumulate through the various routes e.g., inhalation, dermal contact and food intake. Human exposure to these OHCs can induce adverse health effects. Studies on the occurrence of OHCs in human samples from Saudi Arabia are scarce. Therefore, this study aimed at providing preliminary insight on the occurrence of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated biphenyl ethers (PBDEs) in diabetic and non-diabetic donors from KSA. Serum samples were collected from type 2 diabetic patients (n = 40) and control donors (n = 20) to study the impact of OHCs on their health. For the first time we studied the difference of ƩOHCs in type 2 diabetic and control participants. The order of obtained results was ƩOCPs (35–650 ng/g lw)> ƩPCBs (15–90 ng/g lw)> ƩPBDEs (1.5–68 ng/g lw). The major contributors were p,p′-DDE (median 44 ng/g lw), PCB 153 (2.3 ng/g lw), PCB 138 (2.1 ng/g lw), BDE 153 (1.2 ng/g lw) and BDE 47 (0.85 ng/g lw). Exposure to different OHCs between male and female donors was not significantly different (p > 0.05). However, ƩPCBs and ƩOHCs were significantly higher (p < 0.05) in diabetic donors than those of control group. We computed significantly positive correlations (p < 0.05) among different OHCs and between OHCs and age factor. The current study highlights the presence of different OHCs in humans from Jeddah, KSA. This is a preliminary study based on small sample size but our results suggested that detailed studies are required to understand the sources of these pollutants and their impact on human health.