Municipal wastewater contains multi-component mixtures of active pharmaceutical ingredients (APIs). This could shape microbial communities in sewage treatment plants (STPs) and the effluent-receiving ecosystems. In this paper we assess the risk of antimicrobial effects in STPs and the aquatic environment for a mixture of 18 APIs that was previously detected in the effluent of a European municipal STP. Effects on microbial consortia (collected from a separate STP) were determined using respirometry, enumeration of culturable microorganisms and community-level physiological profiling. The mixture toxicity against selected bacteria was assessed using assays with Pseudomonas putida and Vibrio fischeri. Additional data on the toxicity to environmental bacteria were compiled from literature in order to assess the individual and expected joint bacterial toxicity of the pharmaceuticals in the mixture. The reported effluent concentration of the mixture was 15.4 nmol/l and the lowest experimentally obtained effect concentrations (EC10) were 242 nmol/l for microbial consortia in STPs, 225 nmol/l for P. putida and 73 nmol/l for V. fischeri. The lowest published effect concentrations (EC50) of the individual antibiotics in the mixture range between 15 and 150 nmol/l, whereas 0.9–190 μmol/l was the range of bacterial EC50 values found for the non-antibiotic mixture components. Pharmaceutical cocktails could shape microbial communities at concentrations relevant to STPs and the effluent receiving aquatic environment. The risk of antimicrobial mixture effects was completely dominated by the presence of antibiotics, whereas other pharmaceutical classes contributed only negligibly to the mixture toxicity. The joint bacterial toxicity can be accurately predicted from the individual toxicity of the mixture components, provided that standardized data on representative bacterial strains becomes available for all relevant compounds. These findings argue for a more sophisticated bacterial toxicity assessment of environmentally relevant pharmaceuticals, especially for those with a mode of action that is known to specifically affect prokaryotic microorganisms.

A main challenge in ecological risk assessment is to account for the impact of multiple stressors. Nuclear facilities can release both radiological and chemical stressors in the environment. This study is the first to apply species sensitivity distribution (SSD) combined with mixture models (concentration addition (CA) and independent action (IA)) to derive an integrated proxy of the ecological impact of combined radiological and chemical stressors: msPAF (multisubstance potentially affected fraction of species). The approach was tested on the routine liquid effluents from nuclear power plants that contain both radioactive and stable chemicals. The SSD of ionising radiation was significantly flatter than the SSD of 8 stable chemicals (namely Cr, Cu, Ni, Pb, Zn, B, chlorides and sulphates). This difference in shape had strong implications for the selection of the appropriate mixture model: contrarily to the general expectations the IA model gave more conservative (higher msPAF) results than the CA model. The msPAF approach was further used to rank the relative potential impact of radiological versus chemical stressors.

Metals are ubiquitous and normally co-occur as mixtures in soil, but there remains much to do regarding the development of appropriate models which incorporate mixture interactions and bioavailability to estimate their phytotoxicity and phytoaccumulation. Here, we developed a probability-based electrostatic toxicity model (ETM) and a Langmuir-type electrostatic uptake model (EUM) to predict and normalize toxicity and uptake of zinc-copper mixtures in Hordeum vulgare L. in different soils. For model development, the electrical potential (ψ0) and metal ion activities ({M2+}0) at the cell-membrane surface was computed based on plant physiological properties and soil solution chemistry. Single metal toxicity correlated more closely to their corresponding {M2+}0 than to ion activities in soil solution or total soil metal concentrations. The ETM explained up to 89% of the variance in mixture toxicity across different soils. Incorporation of ψ0 into the EUM improved the model's ability for predicting metal uptake. Besides, cell-surface H+ appeared to significantly inhibit copper uptake via competition or other mechanisms, beyond its effect upon ψ0. Our results for the first time demonstrate that electrostatic theory can be used to predict and reconcile mixture toxicity and uptake data in different soils, indicating the potential of electrostatic-based models in risk assessment of multimetal-contaminated soils.

In this study, the phototoxicity of cadmium sulfide (CdS), molybdenum disulfide (MoS2), and tungsten disulfide (WS2) nanoparticles (NPs) toward Escherichia coli (E. coli) under UV irradiation (365 nm) was investigated. At the same mass concentration of NPs, the toxicity of three NPs decreased in the order of CdS > MoS2 > WS2. For example, the death rates of E. coli exposed to 50 mg/L CdS, MoS2, and WS2 were 96.7%, 38.5%, and 31.2%, respectively. Transmission electron microscope and laser scanning confocal microscope images of E. coli exposed to three NPs showed the damage of cell walls and release of intracellular components. The CdS-treated cell wall was more extensively damaged than those of MoS2-treated and WS2-treated bacteria. WS2 and MoS2 generated superoxide radical (O2⁻), singlet oxygen (¹O2), and hydroxyl radical under UV irradiation, CdS produced only O2⁻ and ¹O2. CdS and WS2 released ions under UV irradiation, while MoS2 did not. Reactive oxygen species (ROS) generation and toxic ion release jointly resulted in the antibacterial activities of CdS and WS2. ROS generation was the dominant toxic mechanism of MoS2 toward the bacteria. This study highlighted the importance of considering the hazardous effect of sulfide NPs after their release into natural waters under light irradiation condition.

The environmental pathways for the dissemination of antibiotic resistance have recently received increased attention. Aquatic environments act as reservoirs or sources of antimicrobial-resistant bacteria, antimicrobial residues, and antimicrobial resistance genes (ARGs). Therefore, it is imperative to identify the role of polluted water in the dissemination of antimicrobial resistance. The aim of this study was to evaluate the antimicrobial residues, ARGs, and microbiota in the freshwater systems of the Mekong Delta. We selected 12 freshwater sites from aquacultures and rivers in Can Tho, Vietnam and analyzed them for 45 antimicrobial residues and 8 ARGs by LC/MS/MS and real-time PCR, respectively. A 16S rDNA-based metagenomic analysis was conducted to characterize the water microbiota. Residues of sulfamethoxazole (10/12) and sulfadimidine (7/12) were widely detected, together with the sulfa-resistance genes sul1 (11/12) and sul2 (9/12). Additionally, sulfamethoxazole residues and the β-lactamase-resistance gene blaCTX-M-1 were detected in eight freshwater systems (8/12), suggesting that these freshwater systems may have been polluted by human activity. The metagenomic analysis showed that all the tested freshwater systems contained the phyla Proteobacteria, Actinobacteria, and Bacteroidetes, representing 64% of the total microbiota. Moreover, the Cai Rang River site (Ri-E), which is located at the merge point of wastewaters from backyard-based aquacultures, contained the genera Polynucleobacter, Variovorax, and Limnohabitans, representing more than 78.4% of the total microbiota. Bacterial diversity analysis showed that the Ri-E exhibited the lowest diversity compared with other regions. Principal coordinate analysis showed that the differences among water microbiotas in backyard-based aquacultures could be explained by the farmers' aquaculture techniques.In conclusion, this study demonstrated a collapse of bacterial diversity at the merge point of wastewaters from backyard-based aquacultures in the Mekong Delta.

A gas chromatography tandem mass-spectrometry method dedicated to the analysis of 50 metabolites of polycyclic aromatic hydrocarbons (OH-PAHs) was applied to urine specimens collected from female Long Evans rats under controlled exposure to a mixture of PAHs (at 7 doses ranging from 0.01 to 0.8 mg/kg, by gavage, 3 times per week for 90 days). On four occasions (day 1, 28, 60 and 90), urine samples were collected over a 24 h period. Among these 50 OH-PAHs, 41 were detected in urine samples. Seven additional OH-PAHs were identified for the first time: 1 corresponding to metabolite of pyrene and 3 of anthracene.Strong linear dose versus urinary concentration relationships were observed for 25 of the 41 OH-PAHs detected in rat urine, confirming their suitability for assessing exposure to their respective parent compound. In addition, some isomers (e.g. 1-OH-pyrene, 3-OH-/4-OH-chrysene, 10-OH-benz[a]anthracene, 8-OH-benzo[k]fluoranthene, 11-OH-benzo[b]fluoranthene and 3-OH-benzo[a]pyrene) that were detected starting from the lowest levels of exposure or even in controls were considered particularly relevant biomarkers compared to metabolites only detected at higher levels of exposure. Finally, on the basis of the excretion profiles (on days 1, 28, 60 and 90) and urinary elimination kinetics of each OH-PAH detected at days 1 and 60, this study highlighted the fact that sampling time may influence the measurement of metabolites in urine.Taken together, these results provide interesting information on the suitability of the analysis of OH-PAHs in urine for the assessment of PAH exposure, which could be taken into consideration for the design of epidemiological studies in the future.

Air pollution plays a pivotal role in the deterioration of many materials used in buildings and cultural monuments causing an inestimable damage. This study aims to estimate the impacts of air pollution (SO2, HNO3, O3, PM10) and meteorological conditions (temperature, precipitation, relative humidity) on limestone, copper and bronze based on high resolution air quality data-base produced with AMS-MINNI modelling system over the Italian territory over the time period 2003–2010. A comparison between high resolution data (AMS-MINNI grid, 4 × 4 km) and low resolution data (EMEP grid, 50 × 50 km) has been performed. Our results pointed out that the corrosion levels for limestone, copper and bronze are decreased in Italy from 2003 to 2010 in relation to decrease of pollutant concentrations. However, some problem related to air pollution persists especially in Northern and Southern Italy. In particular, PM10 and HNO3 are considered the main responsible for limestone corrosion. Moreover, the high resolution data (AMS-MINNI) allowed the identification of risk areas that are not visible with the low resolution data (EMEP modelling system) in all considered years and, especially, in the limestone case. Consequently, high resolution air quality simulations are suitable to provide concrete benefits in providing information for national effective policy against corrosion risk for cultural heritage, also in the context of climate changes that are affecting strongly Mediterranean basin.

In recent years, an increasing trend towards investigating and monitoring the contamination of the environment by microplastics (MP) (plastic pieces < 5 mm) has been observed worldwide. Nonetheless, a reliable methodology that would facilitate and automate the monitoring of MP is still lacking. With the goal of selecting practical and standardized methods, and considering the challenges in microplastics detection, we present here a critical evaluation of two vibrational spectroscopies, Raman and Fourier transform infrared (FTIR) spectroscopy, and two extraction methods: thermal extraction desorption gas chromatography mass spectrometry (TED-GC-MS) and liquid extraction with subsequent size exclusion chromatography (SEC) using a soil with known contents of PE, PP, PS and PET as reference material. The obtained results were compared in terms of measurement time, technique handling, detection limits and requirements for sample preparation. The results showed that in designing and selecting the right methodology, the scientific question that determines what needs to be understood is significant, and should be considered carefully prior to analysis. Depending on whether the object of interest is quantification of the MP particles in the sample, or merely a quick estimate of sample contamination with plastics, the appropriate method must be selected. To obtain overall information about MP in environmental samples, the combination of several parallel approaches should be considered.

The effects of graphene oxide (GO) on the transport and deposition behaviors of colloids with different sizes in packed quartz sand were investigated in both NaCl (10 and 50 mM) and CaCl2 solutions (1 and 5 mM) at pH 6. Fluorescent carboxylate-modified polystyrene latex microspheres (CMLs) with size ranging from 0.2 to 2 μm were utilized as model colloids. Both breakthrough curves and retained profiles of colloids in the presence and absence of GO in suspensions under all examined solution conditions were analyzed. The breakthrough curves of all three different-sized CMLs with GO were higher yet the retained profiles were lower than those without GO at both examined ionic strengths in NaCl solutions. The observation showed that GO increased the transport and decreased the deposition of all three different-sized CMLs in NaCl solutions. However, in CaCl2 solutions, opposite observation was achieved at two different ionic strength conditions. Specifically, the presence of GO increased the transport and decreased the deposition of all three different-sized CMLs in 1 mM CaCl2 solutions, whereas, it decreased the transport and increased the deposition of all three different-sized CMLs in 5 mM CaCl2 solutions. Comparison the breakthrough curves and retained profiles of CMLs versus those of GO yielded that the overall transport and deposition behaviors of all three different-sized CMLs with GO copresent in suspensions agreed well with the transport and deposition behaviors of GO under all examined conditions. The transport and deposition behaviors of CMLs in packed porous media clearly were controlled by those of GO under the conditions investigated in present study due to the adsorption of CMLs onto GO surfaces. Our study showed that once released into natural environment, GO would adsorb (interact with) different types of colloids and thus have significant influence on the fate and transport of colloids in porous media.

Application of bioash from biofuel combustion to soil supports nutrient recycling, but may have unwanted and detrimental ecotoxicological side-effects, as the ash is a complex mixture of compounds that could affect soil invertebrates directly or through changes in their food or habitat conditions. To examine this, we performed laboratory toxicity studies of the effects of wood-ash added to an agricultural soil and the organic horizon of a coniferous plantation soil with the detrivore soil collembolans Folsomia candida and Onychiurus yodai, the gamasid predaceous mite Hypoaspis aculeifer, and the enchytraeid worm Enchytraeus crypticus. We used ash concentrations spanning 0–75 g kg⁻¹ soil. As ash increases pH we compared bioash effects with effects of calcium hydroxide, Ca(OH)2, the main liming component of ash. Only high ash concentrations above 15 g kg⁻¹ agricultural soil or 17 t ha⁻¹ had significant effects on the collembolans. The wood ash neither affected H. aculeifer nor E. crypticus. The estimated osmolalities of Ca(OH)2 and the wood ash were similar at the LC50 concentration level. We conclude that short-term chronic effects of wood ash differ among different soil types, and osmotic stress is the likely cause of effects while high pH and heavy metals is of minor importance.