The wastewater generated from fish processing industry contains a credible level of biodegradable proteins and low biodegradable fats, oils, and grease (FOG). The conventional biological treatment of fish processing wastewater (FPWW) containing high concentration of FOG faces the challenges of clogging, hindrance to sedimentation due to the formation of hydrophobic sludge along with lipids, flocculation of sludge with poor activity, dewatering of sludge due to the presence of lipids, and formation of aminated offensive odors. The present investigation employed baffled moving bed biofilm reactor (BMBBR), up-flow anaerobic sludge blanket (UASB) reactor, fluidized immobilized cell carbon oxidation (FICCO) reactor, and chemoautotrophic activated carbon oxidation (CAACO) reactors in series to treat FPWW. Five treatment options were evaluated to elevate the correct option for the treatment of FPWW. The treatment option V had established the removal efficiency of COD, 99 ± 0.1%; protein, 99 ± 0.2%; lipids, 100%; and oil and grease, 100%.

In this article, the geographical location and availability of the most important crop residues generated in Mexico over the last 10 years (2008—2017) were determined. This study estimates the gross number of residues for the four most important cultivars in Mexico named conventional residues (CRs) such as corn, wheat, sorghum, and barley, and estimates were also made for regionally important crops identified as nonconventional residues (NCRs) such as coffee, sugarcane, and beans. The total and sustainable energy potentials (TEP and SEP) for agricultural residues were calculated, in similar way the butanol and electricity production potentials were also calculated if these residues were processed under a nonconventional biorefinery scheme; the calculated availability of crop residues was 59,059,666 t/year, thus demonstrating that Mexico could have great potential for bioenergy production. The estimated TEP was 1,787,241,249 PJ/year, and the SEP was 78,724,689 PJ/year. The production of butanol and its production cost were calculated for the main crop residues; the butanol volume ranged from 7348 to 161,610 t/day, and the volume of crops of regional importance ranged from 6461.9 to 151,389 t/day. The minimum butanol production cost was 2000 t/day of feedstock. The surplus electricity was determined for all crop residues.

Size-resolved trace metal concentrations at two background sites were assessed during a 1-year observation campaign, with the measurements performed in parallel at two mountain sites, where Mt. Dinghu (DHS) located in the rural region of Pearl River Delta (PRD) and Mt. Gongga (GGS) located in the Tibetan Plateau region. In total, 15 selected trace elements (Mg, Al, K, V, Mn, Fe, Cu, Zn, As, Mo, Ag, Cd, Ba, Tl, and Pb) in aerosol samples were determined using inductively coupled plasma mass spectrometry (ICPMS). The major metals in these two mountain sites were Fe, K, Mg, and Ca with concentrations ranging between 241 and 1452 ng/m³, 428 and 1351 ng/m³, 334 and 875 ng/m³, and 376 and 870 ng/m³, respectively, while the trace metals with the lowest concentrations were Mo, Ag, Cd, and Tl with concentrations lower than 4 ng/m³ in DHS and 2 ng/m³ in GGS. The pronounced seasonal variability in the trace elements was observed in DHS, with lower concentrations in spring and summer and relatively high in winter and autumn, whereas seasonal variance of trace elements is hardly observed in Mt. Gongga. The size distribution pattern of crustal elements of Al, Mg, K, Ba, and Fe was quite similar in DHS and GGS, which were mainly found in coarse particles peaked at 4.7–5.8 μm. In addition, V, Mo, Ag, and Tl were also concentrated in coarse particles, although the high enrichment factor (EF > 100) of which suggested anthropogenic origin, whereas trace metals of Cd, Mn, Zn, As, Cu, and Pb concentrated in fine mode particles. Specifically, these trace metals peak at approximately 1.5 μm in DHS, while those in GGS peaked at diameter smaller than 0.3 μm, indicating the responsible for long-range transport from the far urban and industrialized areas. Multivariate receptor model combined with the enrichment factor results demonstrated that the trace elemental components at these two background sites were largely contributed from the fossil fuel combustion (55.4% in DHS and 44.0% in GGS) and industrial emissions factors (20.1% vs. 26.5%), which are associated with long distance transport from the coastal area of Southeast China and the Northwestern India, respectively, as suggested by the backward air mass trajectory analysis. Local sources from soil dust contributed a minor variance for trace elements in DHS (9.7%) and GGS (13.8%), respectively.

The Jurassic coalfield in northern Shaanxi, China is one of the seven largest coalfields in the world. It is located in an arid region of northwestern China, with poor water resources and fragile ecological environment. Due to coal mining, the rock layers on the coal seam will be slumped and fractured to produce fissures. The penetrated fissures will cause a mine water burst disaster and cause damage to groundwater and surface water. The strip filling method can control the expansion of the diversion fissure zone and protect the groundwater and surface water from the underground mining of coal. In this paper, the effects of different strip filling conditions on the diversion fissure zone are studied by discrete element numerical experiments. The study indicates that the upward-fissure and the downward-fissure penetrations are the direct causes of the instability of the water-blocking rock group. After the upward fissure extends to a certain extent, there will be a downward fissure. Under the condition of controlling the width of the filling strip and the compressive strength, the strip filling method can effectively prevent the upward and downward fissures of the water-blocking rock group from penetrating and can ensure that the surface water system is not affected by the underground coal mining activities.

This study analyzes the impact of economic growth, energy consumption, trade openness, and tourism on environmental degradation measured by CO₂ emissions by using annual data of 112 countries for the period 1995 to 2017. Furthermore, the study also analyzes the relationship of the variables as mentioned above in four income and five regional groups of the world. The findings confirm the existence of environmental Kuznets curve (EKC), and level of income (turning point) is also determined, which helps in the improvement of the environmental quality of selected sample countries. The results of the overall sample show that economic growth, use of energy, and tourism are proved to be harmful to the environment, whereas the result of trade openness is not statistically robust. Results of sub-samples are mixed. Findings of this study highlight some essential steps which must be taken by the government and international environmental agencies for the protection of the environment through efficient utilization of energy and sustainable tourism.

Municipal wastewater treatment facilities produce a lot of sludge which is concentrated with different pollutants. The sustainable design of the sludge disposal alternatives is of crucial importance for touristic cities like Mashhad in Iran. Increasing sludge generation and its accumulation in the city and more stringent legislations highlight the challenge of sludge disposal, recently. This study compares different alternatives to reach maximum possible environmental benefits as well as the most cost-effective technologies. In this study, life cycle analysis (LCA) assesses different scenarios for disposal of sewage sludge which is aerobically treated and dewatered for two real case studies. Alteymore and KhinArab are wastewater treatment units in the city. The scenarios include incineration, composting, and landfilling alternatives. The incineration and landfill scenarios are the least interesting solutions according to different life cycle impact categories. The heavy metals’ emission to the soil worsens their impacts. Also, lifecycle cost analysis reveals that composting scenario is more cost-saving than others. However, main disadvantage of the composting scenario is its contribution in freshwater eutrophication. To move towards sustainability, the composting scenario is here determined as the best scenario for sludge disposal in Mashhad.

Despite the fact that there are tens of thousands of thermal baths in existence, knowledge about the occurrence of pharmaceutically active compounds (PhACs) in untreated thermal wastewater is very limited. Because used thermal water is typically legally discharged into surface waters without any treatment, the effluent poses environmental risks for the receiving water bodies. The aim of this study was to show the occurrence patterns and spatiotemporal characteristics of 111 PhACs in thermal wastewater. Six thermal water outflows of different thermal baths were tested in different seasons in the Budapest metropolitan region (Hungary), and diurnal analysis was performed. After solid-phase extraction, the samples were analysed and quantified by coupling supercritical fluid chromatography and mass spectrometry to perform simultaneous multi-residue drug analysis. The results confirm that water discharge pipes directly transport pharmaceuticals into surface water bodies; 34 PhACs were measured to be over the limit of quantification at least once, and 21 of them were found in more than one water sample. The local anaesthetic drug lidocaine, antiepileptic carbamazepine, analgesic derivative tramadol and illicit drug cocaine were detected in more than half of the samples. Caffeine, metoprolol and bisoprolol (cardiovascular drugs), benzoylecgonine (cocaine metabolite), diclofenac (NSAID), citalopram (antidepressant) and certain types of hormones also have a significant frequency of 30-50%. However, the occurrence and concentrations of PhACs vary according to the season and number/types of visitors. As demonstrated by the diurnal fluctuation, drug contamination of thermal waters can significantly vary, even for similar types of baths; furthermore, the quantity and types of some pollutants rapidly change in the discharged thermal wastewater.

One of the most toxic heavy metals in the environment nowadays is lead (Pb). Even though exposure to lead has been reduced in some developed countries, individuals working in certain occupations are still exposed to lead at dangerous levels. Occupational exposure is of great concern and is also the main cause of lead poisoning. Although experts in various fields have been investigating the toxic effects of lead and its compounds for many years now, the association between chronic lead exposure and geno-toxicity is still an interesting point of research. The study aims to evaluate the possible DNA damage and the oxidative stress status induced by occupational exposure to lead and the role of concomitant smoking. The study was conducted on 60 subjects divided into two groups: an exposed group (40 male workers exposed to lead in their workplaces). This group was further divided into two subgroups; 20 workers were cigarette smokers and the other 20 workers were non-smokers. The other control group consists of 20 healthy males, not exposed to lead and matched by age to the exposed group (10 were smokers and the rest were non-smokers). Venous blood samples were collected from each participant for the determination of the following: blood lead level (BLL), plasma malondialdehyde (MDA) levels, and DNA damage using agarose gel electrophoresis. The exposed workers had significantly higher levels of lead and MDA, as well as a high frequency of DNA fragmentation. Smoking workers showed a greater frequency of DNA fragmentation than non-smokers. A significant relation was revealed between the BLL, as well as the MDA level, and the degree of DNA fragmentation among the lead-exposed workers. The study has shown additional evidence proving the association between Pb exposure and oxidative stress. The results further reinforced the role of cigarette smoking in augmenting such oxidative damage in the Pb-exposed population. However, further studies are recommended to evaluate the effect of cigarette smoking on Pb-exposed workers.

The aim of this study was the valorization of titanium flakes (waste) from titanium and titanium alloy ingot production factories and using in applications related to metals recovery as retention bed for some trace metals. The titanium flakes were anodized for surface nanostructuration with TiO₂ nanotubes and then annealed in order to increase the surface stability. The nanostructured titanium flakes were loaded and pressed in a retention column linked with inductively coupled plasma spectrometer (ICP-OES). This system allowed determination of trace elements such as beryllium, lanthanum, lutetium, and ytterbium from sample solutions. Beryllium recovery percentage was over 90%, while lanthanides have just a satisfactory recovery percentage (about 65% Yb and Lu and 50% La). The TiO₂ nanotube architecture was not affected during utilization being able to perform for a long time. A thermodynamic and kinetic study was done for beryllium due to its successful adsorption recovery percentage. The obtained results showed that the titanium waste is a promising material for rare earth and relatively rare earth elements retention and recovery. Graphical abstract Graphical abstract