This study was conducted to evaluate the contribution of environmental factors such as solar radiation and dissolved organic matter (DOM) on the photo-induced dissolved gaseous mercury (DGM) production through laboratory experiments using field water samples collected from wetlands. DGM production was more significantly influenced by UVB intensity than UVA. DGM formation was also significantly affected by DOM chemical structure/composition rather than its concentration. Increasing NO3 − concentration limited DGM production, but photo-induced Hg oxidation stimulated by NO3 − would possibly occur when the NO3 − level is more than twice the DOC level. The addition of phosphorus into the field water samples induced a slight increase of DGM production; however, the addition of nitrogen decreased DGM formation, suggesting that an increase of limiting nutrients in water may promote biotic DGM production. Experiments using a Selenastrum capricornutum monoculture solution showed that cell density had a positive effect on DGM production. Moreover, the difference in DGM production between filtered and unfiltered samples showed that S. capricornutum significantly produced biotic DGM under UVA irradiation. Finally, our results imply that environmental factors such as light intensity, DOM sources, and site-specific microorganisms can significantly affect photo-induced Hg transformation.

The Diep River is a major freshwater ecosystem in the Western Cape, South Africa. Although it is surrounded by many sources of metal pollution, the actual metal levels in this river system are unknown. Wetland plants are known to accumulate metals and may possibly be used as biomonitors of metal contamination in a river system. One such species, the sedge Bolboschoenus maritimus, is found in abundance along the banks of this river. The aim of this study was to investigate and monitor the degree of metal contamination in the water and sediments of the lower Diep River, as well as to study the seasonal accumulation and distribution of metals in B. maritimus, and the use thereof as biomonitor species. Two sampling sites were used: one site above the wetland section of the river, receiving runoff mainly from agricultural lands (site 1), and one site close to the river mouth (site 2), exposed to several possible pollution sources. Water, sediment, and plant (root, leaf and stem) samples were collected seasonally for 1 year and analyzed for Al, Zn, Cu, and Fe. There was greater bioaccumulation of metals by plants at site 2, due to greater bioavailability of metals. B. maritimus was shown to be a root accumulator of metals. Seasonal fluctuations in root, stem, and leaf metal concentrations did not follow seasonal sediment concentration patterns. However, using B. maritimus as test species did provide valuable additional information to sediment and water analyses. More extensive research is needed to conclude whether this species is an effective biomonitor in the lower Diep River environment.

Polycyclic aromatic hydrocarbons and heavy metal (Pb, Cd, Cu, Zn, Hg, Fe, Co, Cr, Mo) contents were established in soil and plant samples collected in different areas of the railway junction Iława Główna, Poland. Soil and plant samples were collected in four functional parts of the junction, i.e. the loading ramp, main track within platform area, rolling stock cleaning bay and the railway siding. It was found that all the investigated areas were strongly contaminated with polycyclic aromatic hydrocarbons (PAHs). The PAH contamination of the soil was the highest in the railway siding and in the platform area (59,508 and 49,670 μg kg−1, respectively). In the loading ramp and cleaning bay, the PAH concentration in soil was lower but still relatively very high (17,948 and 15,376 μg kg−1, respectively). The contamination in the railway siding exceeded the average control level up to about 80 times. In the soil of all the investigated areas, four- and five-ring PAHs prevailed. The concentrations of PAHs were determined in four dominating species of plants found at the junction. The highest concentration was found in the aerial parts of Taraxacum officinale (22,492 μg kg−1) growing in the cleaning bay. The comparison of the soil contamination with PAHs in the investigated railway junction showed a very significant increase of the PAHs level since 1995. It was found that the heavy metal contamination was also very high. Pb, Zn, Hg and Cd were established at the highest levels in the railway siding area, whereas Fe concentration was the highest in the platform area. A significant increase in mercury content was observed in the cleaning bay area. The investigations proved very significant increase of contamination with PAHs and similar heavy metals contamination in comparison with the concentration determined in the same areas 13 years ago.

Achieving high productivity in agriculture is increasingly needed and requested; however, this activity should be performed in a sustainable and rational way. The use of micronutrients in the fertilization of the most diverse cultures is becoming a common practice on farms, but it is important to conduct studies in relation to fertilizers used for this supplement, including raw materials with which they are produced. Therefore, this study aimed to evaluate the phytoavailability of nutrients and toxic heavy metals Cd, Pb, and Cr; productivity; and yield components in wheat sown in soil with residue of N/P2O5/K2O + Zn-based fertilizer applied in previous crop. Treatments consisted of residual fertilization of five forms arranged in two doses (D1 = 300 kg ha−1 and D2 = 600 kg ha−1). The five types of fertilization were composed of formulated N/P2O5/K2O and the variation of different Zn sources. In the assessment of phytoavailability were determined levels of K, Ca, Mg, Cu, Mn, Zn, Fe, Cd, Pb, and Cr in wheat leaves. The results show that the residual effect of fertilization was not enough for there being difference between treatments at both doses used; however, it was found that the fertilizers used to Zn supply provided residual effect, providing significant levels of Pb and Cr for wheat plants.

The majority of oil from oceanic oil spills (e.g. the recent accident in the Gulf of Mexico) converges on coastal ecosystems such as mangroves. Microorganisms are directly involved in biogeochemical cycles as key drivers of the degradation of many carbon sources, including petroleum hydrocarbons. When properly understood and managed, microorganisms provide a wide range of ecosystem services, such as bioremediation, and are a promising alternative for the recovery of impacted environments. Previous studies have been conducted with emphasis on developing and selecting strategies for bioremediation of mangroves, mostly in vitro, with few field applications described in the literature. Many factors can affect the success of bioremediation of oil in mangroves, including the presence and activity of the oil-degrading microorganisms in the sediment, availability and concentration of oil and nutrients, salinity, temperature and oil toxicity. More studies are needed to provide efficient bioremediation strategies to be applicable in large areas of mangroves impacted with oil. A major challenge to mangrove bioremediation is defining pollution levels and measuring recuperation of a mangrove. Typically, chemical parameters of pollution levels, such as polycyclic aromatic hydrocarbons (PAHs), are used but are extremely variable in field measurements. Therefore, meaningful mangrove monitoring strategies must be developed. This review will present the state of the art of bioremediation in oil-contaminated mangroves, new data about the use of different mangrove microcosms with and without tide simulation, the main factors that influence the success of bioremediation in mangroves and new prospects for the use of molecular tools to monitor the bioremediation process. We believe that in some environments, such as mangroves, bioremediation may be the most appropriate approach for cleanup. Because of the peculiarities and heterogeneity of these environments, which hinder the use of other physical and chemical analyses, we suggest that measuring plant recuperation should be considered with reduction in polycyclic aromatic hydrocarbons (PAHs). This is a crucial discussion because these key marine environments are threatened with worldwide disappearance. We highlight the need for and suggest new ways to conserve, protect and restore these environments.

Aldama dentata Llave & Lex. is a plant native to Latin America that exhibits metallicolous populations. Its ecophysiological (EP) response to Cu stress, administered as graded soil concentrations (Cs) of the fungicide copper(II) oxychloride, is examined in depth. Using a systems biology- and population dynamics-inspired approach, an r/K-driven model is proposed that satisfactorily explains the plant Cu concentration (Cp) versus Cs EP response curves for the root, shoot, and whole plant. A. dentata was found to be a Cu excluder (ME). The dual role of Cu as a nutrient and toxin at low and high concentrations, respectively, manifested as a parabolic variation of the foliar area where the toxicity appeared as a second-order effect. The power-law variance of biomass (Bp) with Cp expected from the universal allometric scaling law of biology was loosely followed and is discussed in terms of the mode of Cu uptake by the plant and Cu’s dual physiological role. Biometric growth indices reflected the impact of Cu on the photosynthetic energy harvest. The general applicability of the r/K-driven model was corroborated by its successful application to the published Cp–Cs data of the well-known Cu ME, Silene vulgaris. The r–K factors suggest a new quantitative manner of comparing the phytoavailability of the metal and the plant’s accumulation capability across soil types. A. dentata with high root Cp but low Bp diminution could potentially find use as a Cu phytostabilizer.

Sampling is conducted during 2006 in Lahontan Reservoir, Nevada to investigate seasonal variation of total mercury (THg) and methylmercury (MeHg) partitioning in different phytoplankton size fractions as a function of point source (fluvial) mercury (Hg) loads, reservoir residence time, and algal growth. Carson River Hg inputs into the reservoir are extremely dynamic with spring loads two orders of magnitude larger than summer loads. Chlorophyll a measurements show two periods of algal growth. A small amount of algal growth occurs March to May. A second more substantial bloom occurs in the late summer, which is dominated by large, filamentous algae. THg concentrations (C b) and partitioning coefficients (K d) in total suspended particulate matter (SPM) are highest when fluvial inputs of Hg-contaminated sediment are large and are not necessarily associated with living biomass. However, MeHg K d in the small size fraction is indirectly related to fluvial loads and more strongly associated with living biomass in the later portion of the summer when algal growth occurs and reservoir residence times are longer. Data suggest size distinction is important to MeHg partitioning in the reservoir. Lumping all sizes into a single SPM sample will bias the analysis toward low MeHg C b and low MeHg K d in late summer when Aphanizomenon flos-aquae dominates the phytoplankton assemblage.

A constructed wetland composed of a pond- and a marsh-type wetland was employed to remove nitrogen (N) and phosphorus (P) from effluent of a secondary wastewater treatment plant in Korea. Nutrient concentrations in inflow water and outflow water were monitored around 50 times over a 1-year period. To simulate N and P dynamics in a pond- and a marsh-type wetland, mesocosm experiments were conducted. In the field monitoring, ammonium (NH ₄ ⁺ ) decreased from 4.6 to 1.7 mg L⁻¹, nitrate (NO ₃ ⁻ ) decreased from 6.8 to 5.3 mg L⁻¹, total N (TN) decreased from 14.6 to 10.1 mg L⁻¹, and total P (TP) decreased from 1.6 to 1.1 mg L⁻¹. Average removal efficiencies (loading basis) for NO ₃ ⁻ , NH ₄ ⁺ , TN, and TP were over 70%. Of the environmental variables we considered, water temperature exhibited significant positive correlations with removal rates for the nutrients except for NH ₄ ⁺ . Results from mesocosm experiments indicated that NH ₄ ⁺ was removed similarly in both pond- and marsh-type mesocosms within 1 day, but that NO ₃ ⁻ was removed more efficiently in marsh-type mesocosms, which required a longer retention time (2-4 days). Phosphorus was significantly removed similarly in both pond- and marsh-type mesocosms within 1 day. Based on the results, we infer that wetland system composed of a pond- and a marsh-type wetland consecutively can enhance nutrient removal efficiency compared with mono-type wetland. The reason is that removal of NH ₄ ⁺ and P can be maximized in the pond while NO ₃ ⁻ requiring longer retention time can be removed through both pond and marsh. Overall results of this study suggest that a constructed wetland composed of a pond- and a marsh-type wetland is highly effective for the removal of N and P from effluents of a secondary wastewater treatment plant.

The kinetics and mechanism of methylene blue adsorption onto raw pine cone biomass (Pinus radiata) was investigated under various physicochemical parameters. The extent of the methylene blue dye adsorption increased with increases in initial dye concentration, contact time and solution pH but decreases with the amount of adsorbent, salt concentration and temperature of the system. Overall the kinetic studies showed that the methylene blue adsorption process followed pseudo-second-order kinetics among various kinetic models tested. The different kinetic parameters including rate constant, half-adsorption time and diffusion coefficient are determined at different physicochemical conditions. Equilibrium data were best represented by Langmuir isotherm among Langmuir and Freundlich adsorption isotherm. The maximum monolayer adsorption capacity of pine cone biomass was 109.89 mg/g at 30°C. The value of separation factor, R L, from Langmuir equation and Freundlich constant, n, both give an indication of favourable adsorption. Thermodynamic parameters such as standard Gibbs free energy (∆G 0), standard enthalpy (∆H 0), standard entropy (∆S 0) and the activation energy (A) were calculated. A single-stage batch absorber design for the methylene blue adsorption onto pine cone biomass has been presented based on the Langmuir isotherm model equation.

The use of sewage mud in agriculture has generated several discussions due to the risks of soil contamination mainly by metals. Due to the intimate contact of the diplopods with soil, they have been successfully used in ecotoxicological analyses. The impact of the external environment in the physiological changes in organs and tissues of different organisms can be reflected by the ultrastructural changes of their cells. Using the transmission electron microscopy, this study aimed to analyze the ultrastructural alterations in the midgut of the diplopod Rhinocricus padbergi exposed to substrate containing sewage mud from a Sewage Treatment Station of São Paulo State, Brazil. Therefore, it was sought to identify cellular alterations resulting from the subchronic exposure (90 days of exposure) of the animals to complex and potentially toxic mixtures such as sewage mud at different concentrations (1%, 10%, and 50%). The control group presented integrity in the cells and tissues that constitute the midgut. The animals exposed to sewage mud at 10% and 50% died before the 90 days of exposure. The analysis of the midgut of the animals exposed to 1% of sewage mud showed alterations in the epithelial cells, cells of the fat body layer, and hepatic cells. The main alterations observed were cytoplasmatic vacuolization, loss of the plasmatic membrane, and nuclear envelope integrity. We conclude that the mud sample presents a mixture of complex substances of cytotoxic and genotoxic action to the diplopod, causing cell death, since both the nucleus and other cellular compartments were damaged.