Arbuscular mycorrhizal fungi (AMF) hold a crucial role in ecosystems because they are involved in nutrient cycling between soil and plants. This work aimed at evaluating the impacts that atmospheric pollution by polycyclic aromatic hydrocarbons may have on infectivity of indigenous AMF in soils. Two agricultural soils (Maconcourt, La Bouzule) were exposed for 2 weeks to ambient air (control, C) or to atmospheric phenanthrene (PHE) deposition (180 μg m−3 air). After exposure, soils were divided into a top (0–1 cm) and a bottom (1–15 cm) layer fraction. AMF infectivities of soils were determined after 2 weeks of atmospheric exposition using leek (Allium porum) as bioassay plant. Atmospheric PHE was mainly recovered in the top layer of soil (500–1,350 μg kg−1) of both soils and did not readily diffuse into the depth. Atmospheric contamination led to decreases in AMF infectivities of the top layer in both soils and affected the growth of leeks. Our results not only report evidence that infectivity of indigenous AMF is sensitive to PHE in soils but also emphasize that AMF are primary affected by the soil layer regardless to the pollution level.

Novel adsorption materials—Fe–Ni nanostructures and C/Fe–Ni composites—with the carbonaceous material coming from sewage sludge, have been developed and evaluated to remove indigo carmine from aqueous solution. The adsorbents were characterized by transmission and scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and Brunauer–Emmett–Teller analysis. Sorption kinetics and isotherms were determined and the adsorption behaviours analysed. All adsorbents here studied have exhibited good efficiency to remove indigo carmine from aqueous solution. Pseudo-second-order kinetic and Langmuir–Freundlich isotherm models were successfully applied to the experimental data. Fe–Ni nanostructures adsorption capacity was 977.18 mg/g, followed by C/Fe–Ni 75/25% composite with 654.33 mg/g, and a lowest value, 486.41 mg/g, was obtained for C/Fe–Ni 95/5% composite. It can be suggested that the sorption mechanism of the dye is chemisorption on these heterogeneous novel, cheap and efficient functional materials. All materials provide the highest adsorption capacities in pH between 4 and 10. In addition, three sorption–desorption cycles using 30% H2O2 solution and distilled water were performed; sorption efficiencies of both composites (C/FeNi 75/25% and C/FeNi 95/5%) decreases in each cycle, but this behaviour is not observed for FeNi nanoscale oxides.

Air pollution emissions were not continually monitored in the Upper Silesian Industrial District (USID), southern Poland, and data is only available for the last 20 years. Long-lasting and severe tree ring reductions in pines growing 5–20 km north of the USID area recorded particularly high levels of air pollution emissions in the period 1950–1990. Especially high amounts of reductions and many missing rings were found in the period 1964–1981. At the same time, pines growing 60 km west of the USID do not record deep ring reductions; this proves that the phenomenon is of a regional nature. Increases in infant mortality and lung, bronchial, and tracheal cancer morbidity rates among males were also recorded in the USID during periods of high air pollution. Infant mortality rates increased several years after the tree ring reductions. Therefore, it may be possible to use tree ring reductions as an early indicator of the occurrence of adverse effects on human health.

We examined the effects of ozone and elevated CO₂ concentration in summer on the growth and photosynthetic traits of three representative birch species in Japan (mountain birch, Monarch birch, and white birch). Seedlings of the three birch species were grown in 16 open-top chambers and were exposed to two levels of ozone (6 and 60 nmol mol⁻¹ for 7 h per day) in combination with two levels of CO₂ (370–380 and 600 μmol mol⁻¹ for daytime) from July to October. No adverse effects of ozone were found in the Monarch birch or the white birch, but elevated ozone in summer reduced branch biomass and net photosynthesis, and accelerated leaf abscission, in the mountain birch. Elevated CO₂ promoted root development and thereby reduced the ratio of shoot dry mass (stem + branch) to root dry mass (S/R ratio) in the mountain birch and white birch. In contrast, there was no difference in dry mass between ambient and elevated CO₂ for the Monarch birch, due to downregulation of photosynthesis. Studies of the combined effect of CO₂ and ozone revealed that elevated CO₂ did not ameliorate the effect of ozone on mountain birch in late summer. In considering the ameliorating effect of CO₂ on ozone damage, it is necessary to take account of the species and the season.

During the intensive flood in May–June 2010, the floodplains in Little Poland Vistula Gap, used mostly for agriculture, were waterlogged for a period of over 1 month. The aim of the study was to assess the effect of the flood on the level of contamination of the soils in this region. The analysis included basic physicochemical soil properties, contents of ten metals, and concentrations of 16 polycyclic aromatic hydrocarbons (PAHs). The studies cover two territories on opposite sites of the river Vistula (Wilkow and Janowiec) differing in their areas (70 and 4.6 km2) and time of water logging (30 and 10 days). Forty soil samples were collected from both areas immediately after the flood event from the upper (0–30 cm) soil layer together with four samples from the 30–60-cm depth layer. This was supplemented by eight samples from the flood-deposited sediment layer (thickness, 2 cm). The concentrations of identified metals (As, Ba, Cr, Sn, Zn, Cd, Co, Cu, Ni, Pb) at all the sampling points were below the Polish legal limits for the upper layer of soils for agriculture use. The same regarded the median contents of nine PAHs compounds specified in the Polish regulations. In both areas, the median contents of Σ16 PAHs (0.21–0.35 mg kg−1), Zn (10.3–10.6 mg kg−1), Pb (9.2–10.7 mg kg−1), and Cd (0.03 mg kg−1) were much below the mean concentrations of those contaminants in arable soils on the national and European levels. The results show that this severe flooding episode in “clean” agricultural area had no immediate negative impact on the soils as regards the basic physicochemical properties (organic matter content, acidity, nitrogen content) and did not result in excessive soil contamination.

Solution pH is among the most important parameters that influence heavy metal biosorption. This work presents a kinetic study of the effects of pH on chromium biosorption onto Cupressus lusitanica Mill bark from aqueous Cr(VI) or Cr(III) solutions and proposes a mechanism of adsorption. At all assayed contact times, the optimum pH for chromium biosorption from the Cr(III) solution was 5.0; in contrast, optimum pH for chromium biosorption from the Cr(VI) solution varied depending on contact time. The kinetic models that satisfactorily described the chromium biosorption processes from the Cr(III) and Cr(VI) solutions were the Elovich and pseudo second-order models, respectively. Diffuse reflectance infrared Fourier transform spectroscopy studies suggest that phenolic compounds present on C. lusitanica Mill bark play an important role in chromium biosorption from the Cr(III) solution. On the other hand, chromium biosorption from the Cr(VI) solution involved carboxyl groups produced on the bark by redox reactions between oxygen-containing groups and Cr(VI), and these were in turn responsible for the biosorption of Cr(III) produced by Cr(VI) reduction.

The Loxahatchee National Wildlife Refuge (Refuge) developed as a system with waters low in nutrients. Today, the Refuge wetlands are impacted by inflows containing elevated nutrient concentrations originating from agricultural sources flowing into canals surrounding the west side and from urban and horticultural areas flowing into canals surrounding the eastern side of the Refuge. We analyzed water quality sampled at 40 sites divided into eastern and western areas and four zones in the Refuge. We defined four zones as the canals surrounding the Refuge marsh, the perimeter zone, the transition zone, and the interior zone. The canal receiving agricultural inflows had greater alkalinity and conductivity (SpC), Si and SO4 but lower turbidity and total suspended solids than the canal receiving urban and horticultural inflows. Alkalinity, total dissolved solids (TDS), SpC, Ca, Cl, and SO4 concentrations were greater in the perimeter than in transition and interior zones. Alkalinity and SpC values and SO4 concentrations were greater in the transition than in interior zone. Alkalinity, SpC, and TDS values and Ca, SO4, and Cl concentrations correlated in negative curvilinear relationships with distance from the canal (r 2 = 0.78, 0.70, 0.61, 0.78, 0.64, 0.57, respectively). Analysis of multiple water quality parameters may reveal the complexity of interactions that might be overlooked in a simple single parameter analysis. These data show an impact of canal water containing high nutrient concentrations on water quality flowing from the canal towards the Refuge interior.

This article describes the synthesis of p-sulfonated calix[4,6]arene derivatives and firstly their immobilization onto magnetic nanoparticles for removal of some carcinogenic aromatic amines. The prepared new water-soluble calix[4,6]arene appended magnetic nanoparticles (p-C[4]-MN and p-C[6]-MN) were characterized by a combination of Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analyses. The separation and quantification of aromatic amines were performed by high performance liquid chromatography. In batch sorption experiments, the compounds 7 and 8 were found to be effective sorbent for aromatic amines. It was observed that the percentage of aromatic amine removal was 44–97 % for compound 7 and 63–97 % for 8 when the pH of the aromatic amine solution was in the range of 3.0–8.5. The sorption of aromatic amines by p-sulfonated calix[n]arenes-based magnetic nanoparticles shows that sulfonic acid groups play a major role for the formation of hydrogen bonds and electrostatic interactions.

An effective adsorbent for the removal of heavy metals was manufactured by immobilization of jujube powder. The adsorptions of Cd, Zn and Cu from aqueous solutions by jujube complex beads (Type 1 and Type 2) were studied in a batch adsorption system. The adsorption data were fitted well with the Langmuir isotherm models. The adsorption capacities (β) for Cd, Zn and Cu were 4.23, 2.93 and 3.64 mg/g in Type 1 and 1.24, 0.70 and 1.35 mg/g in Type 2 beads. The removal efficiencies of the Type 2 beads, with a larger unit surface area, were lower than those of the Type 1 due to part of the casein or cyclic AMP being destroyed during the drying process of the Type 1. These values for Type 1 beads were higher than those of all other adsorbents for each heavy metal. A comparison of the kinetic models on the overall adsorption rate showed that the adsorption system was best described by pseudo-first-order kinetics. The removal efficiencies of Cd, Zn and Cu exhibited similar tendencies to those observed in the equilibrium tests. This indicates that the jujube complex beads developed in this study can be used as promising adsorbents for the removal of heavy metals from wastewater.

We investigated the influence of cadmium stress on zinc hyperaccumulation, mineral nutrient uptake, and the content of metal-binding proteins in Arabidopsis halleri. The experiments were carried out using plants subjected to long-term cadmium exposure (40 days) in the concentrations of 45 and 225 μM Cd²⁺. Inductively coupled plasma-mass spectrometry, size exclusion chromatography coupled with plasma-mass spectrometry, and laser ablation inductively coupled plasma-mass spectrometry used for ablation of polyacylamide gels were employed to assess the content of investigated elements in plants as well as to identify metal-binding proteins. We found that A. halleri is able to translocate cadmium to the aerial parts in high amounts (translocation index >1). We showed that Zn content in plants decreased significantly with the increase of cadmium content in the growth medium. Different positive and negative correlations between Cd content and mineral nutrients were evidenced by our study. We identified more than ten low-molecular-weight (<100 kDa) Cd-binding proteins in Cd-treated plants. These proteins are unlikely to be phytochelatins or metallothioneins. We hypothesize that low-molecular-weight Cd-binding proteins can be involved in cadmium resistance in A. halleri.