Currently, the reduction of reactive dyes present in the textile effluent is a big challenge due to the threat to the environment. Existing physical and chemical methods contains many drawbacks. In the present scenario microbial reduction pays much attention and current focus of research. Therefore, the present study isolated dye decolorizing bacterium Exiguiobacterium aurantiacum (TSL7) from activated sludge and identified by molecular techniques and 16S rDNA sequences. Decolorization was not established in Bushnell hass broth composition in accordance with absence of carbon and nitrogen source. The three environmental factors pH, starch and beef extract were selected from Plackett-Burman design experiments. The central composite design was employed to optimize the maximum removal of remazol golden yellow (91.83%) with pH, 6.89, starch, 0.49% (w/v) and beef extract 0.67% (w/v) respectively, These key factors playing a major role in the bacterial dye removal and the interactions were evaluated statistically. The optimal value of significant factors supports to maximize the dye removal competency of isolated bacterium. Thus results exhibited that local salt tolerant bacterium Exiguiobacterium aurantiacum (TSL7) could be a potential candidate for an in situ-bioremediation of inorganic salts abundant textile effluents in the textile industry.

Global plastic production has exceeded 300 million tons per year (Plastics Europe, 2015). In the marine and freshwater environments, larger plastics abrade and photo-degrade resulting in persistent environmental microplastics that are not effectively removed by existing wastewater treatment plants (WWTPs). The ecological effects of microplastics on the marine environment are poorly understood, with even less attention to freshwater systems. To assess whether microplastics have infiltrated food webs of shallow nearshore ecosystems of the St. Lawrence River, we sampled four sites along the international section of the St. Lawrence River, from Alexandria Bay to Waddington, NY. Twelve sediment samples along with one hundred and forty-nine Dreissenid mussels (Dreissena polymorpha and D. bugensis) were collected from the littoral zone, and forty one road-killed anuran amphibian specimens were collected adjacent to the river.  Sediment subsamples at two of four sediment sampling sites contained plastic micro-particles. No microbeads were detected within any of the Dreissenid mussels or anuran digestive tract samples. The Dreissenids were likely too small to ingest microbeads greater than 35 microns. Microplastics congregating in the littoral zone may pose a threat within the food web through potential ingestion, requiring further methodological development.

In the present study, analytical solutions are obtained for two-dimensional advection dispersion equation for conservative solute transport in a semi-infinite heterogeneous porous medium with pulse type input point source of uniform nature. The change in dispersion parameter due to heterogeneity is considered as linear multiple of spatially dependent function and seepage velocity whereas seepage velocity is nth power of spatially dependent function. Two forms of the seepage velocity namely exponentially decreasing and sinusoidal form are considered. First order decay and zero order production are also considered. The geological formation of the porous medium is considered of heterogeneous and adsorbing nature. Domain of the medium is uniformly polluted initially. Concentration gradient is considered zero at infinity. Certain new transformations are introduced to transform the variable coefficients of the advection diffusion equation into constant coefficients. Laplace Transform Technique (LTT) is used to obtain analytical solutions of advection-diffusion equation. The solutions in all possible combinations of temporally and spatially dependence dispersion are demonstrated with the help of graphs.

Surface water contains a large number of pollutants, particularly human pathogens, organic toxicants and heavy metals. Due to the toxic nature of heavy metals towards marine organisms, its removal from the environment has been a growing issue. The biosorption of heavy metal ions from surface water using fish scales has emerged as an environmentally friendly technique. This study assessed the degree of heavy metals accumulation in the scales of Oreochromis niloticus and determining its efficiency as a bioindicator for Cu, Mn and Fe ions removal in the environment of Wewe and Owabi rivers. This study shows that the levels of Cu, Mn, Fe adsorbed from the Owabi river were 685.70 ± 16.51, 247.06 ± 50.46 and 892.90 ± 96.29 mg/kg, respectively. Moreover, the levels of Cu, Mn and Fe adsorbed from Wewe river were 501.60 ± 77.78, 300.89 ± 54.61     and 413.04 ± 9.92 mg/kg, respectively. Under best optimum adsorption conditions, Cu was the best removed heavy metal ions in both surface water reservoirs. Multivariate analysis showed that Cu and Mn showed association in Owabi river, while Mn and Fe were correlated in Wewe river signifying their similarities to a common anthropogenic activity. The Fourier–transform infrared spectrum revealed the existence of a nitro, amine, and carbonyl groups in the biosorption process. This study highlighted that Oreochromis niloticus scales was an efficient bio–sorbent in removing Cu, Mn and Fe ions from Owabi and Wewe rivers.

This study carried out to investigate the production of hydrogen using the organic fraction of municipal solid waste OFMSW, where the anaerobic digester was depended as a method for disposing and treating OFMSW and producing bio-hydrogen. Bio-hydrogen production had been studied under different parameters including pH, solid content T.S%, temperature and mixing ratios between the thick sludge to OFMSW. The optimal conditions were found at pH, T.S%, temp and mix ratio of 7, 8%, 32oC, and 1:5, respectively where the hydrogen yield was (138.88 mL/gm vs).  To found the most important parameters in this process, the ANN model had been applied. The effectiveness of temperature, total solid, mixing ratio and pH comes in the following sequence 100%, 75.8%, 71.9%, and 57.2% respectively, with R2 of 95.7%. Multiple correlation model was used to formulate an equation linked between the hydrogen production and the parameters effected on. Gompertz model was applied to compare between theoretical and experimental outcomes, it also given a mathematical equation with high correlation coefficient R2 of 99.95% where the theoretical bio-hydrogen was (141.76 mL/gm vs) under best conditions. The first order kinetic model was applied to evaluate the dynamics of the degradation process. The obtained negative value of (k = - 0.0886), indicates that, the solid waste biodegradation was fast and progresses in the right direction.

Advanced Oxidation Processes (AOPs) have been employed to degrade biorefractory organic matters. This study investigates the combination of classical Fenton reaction with electrochemical oxidation, the electro-Fenton process, for the treatment of semi aerobic landfill leachate, collected from Pulau Burung Landfill Site (PBLS), Penang, Malaysia. The investigation has been carried out in batch reactors with aluminum electrodes to establish the optimal treatment conditions. The effects of applied current, pH, reaction time, electrodes separation distance, H2O2/Fe2+ molar ratio, and H2O2 and Fe2+ concentrations, significant process parameters by themselves, have also been investigated. According to the obtained results, electro-Fenton process is very efficient for the treatment of landfill leachate. Optimum oxidation efficiency has been achieved when neither H2O2 nor Fe2+ are overdosed, so that the maximum amount of OH radicals is available for the oxidation of organic compounds. The highest COD and color removals have been 92% and 93%, respectively; obtained at initial pH=3, H2O2/Fe2+ molar ratio=1, applied current= 2A, treatment duration= 30 min, and electrodes separation distance= 3 cm. The current efficiency declines from 94% to 38% when the current rises from 0.5A to 2A.

The effluent generated from a thermal power plant waste is a mixture of several chemicals and to identify the effect of these chemicals on soil, a case study on naturally contaminated sites at Al-Musayyib region, Hilla city in Iraq has been carried out. Soil and water samples were collected from the sites and analyzed to identify the pollutants and their effect on soil characteristics. Laboratory experiments were formulated to model the field around a channel collecting effluent for about 20 years and the pollutant transport pattern through the soil using soaking process was studied. Experiments were also conducted to study the effect of pollutants on engineering properties of the soil. For environmental management, permeable reactive barriers are used as stabilization and solidification technology to control the pollution through the soil. In this study, the suitability of locally available materials like activated granular carbon was also investigated as reactive media in permeable reactive barrier. The results have shown higher change in geo-environmental properties of soil with the soaking period and it has also been proved that granular carbon improves the geo-environmental properties of polluted soil.

The response of climate to perturbations in GHGs is location dependent. Six experiments: control (CTRL); double CH4; double CO2; double N2O; halved CFC11 and halved CFC12 were carried out to reveal the local area response to different GHGs levels in the atmosphere over West Africa. Double CH4, CO2 and N2O generally induce wetness but they also induce localized dryness at the hilly and mountainous areas of SW Ghana, Central Nigeria, Northern Cameroon and South-eastern Central African Republic. Increase in ground temperature is induced by double GHGs with intensified warming at the north by double CO2. However, patches of cooling are induced at the north. Changes in specific humidity induced by double CO2, CH4 and N2O are similar. Intensified tropical easterly jet is induced by double GHGs. A dipole anomaly of wind with positive at the lower latitude and negative at higher latitude is induced at the northern part of West Africa. Significant reduction in cloud water content is induced from 900 to 400 hPa and 0 and 15oN.

Coal mining and related industry can increase heavy metals (HMs) concentrations in soil, atmosphere and wheat, thereby posing metal-associated human health risk via food ingestion.  In this study, 58 samples of soil, wheat, and dust were collected from Xuzhou coal mine eastern China, six kinds of HMs Pb, Cd, Cu, Zn, As and Cr were studied for their spatial distribution in wheat, enrichment in different wheat organs (roots, stem leaf, glumes, and grains), pollution level and potential human health risks. Results show that the spatial distribution of HMs in wheat grains were likely to coal while dissimilar to soil.  Most of heavy metals enrichment in wheat organs retained in glume and stem leaf after roots, and followed by grains, indicating that HMs was accumulated more from atmospheric dust as compared to other sources. Meanwhile, 71% of wheat grains were contaminated by HMs comprehensively in Xuzhou coal mine area. The potential health risk indicated that ingestion of food was the main exposure route causing non-carcinogenic and carcinogenic risk for inhabitants. This study provides basic information to control HMs enrichment from atmospheric dust and human health risk management policies in the mining area.

A total of 58 Cadmium tolerant bacterial isolates were isolated from 26 samples collected from 20 villages/city of different contaminated water samples from industrial and mining affected areas of Chhattisgarh (India). Out of 58 bacterial isolates, 15 bacterial isolates were able to grow in presence of 40 mM cadmium chloride. These fifteen were further screened by biochemical characterization, antibiotic susceptibility and presence of czcA gene. However, finally five selected isolates (BSWC3, RgCWC2, RgUWC1, RpSWC3, KDWC1) were identified by 16S rRNA gene sequencing belonged to the genus Serratia liquefaciens, Klebsiella quasipneumoniae subsp. similipneumoniae, Klebsiella pneumoniae, Pantoea dispersa and Enterobacter tabaci, respectively. Among these two best culture Serratia liquefaciens BSWC3 and Klebsiella pneumoniae RpSWC3 were testes for their bioremediation efficiency individually as well as in mixed culture. Atomic Absorption spectrophotometer analysis of samples revealed that cadmium (Cd) tolerant bacterial isolates BSWC3, RpSWC3 and Combination of BSWC3 and RpSWC3 were significantly reduce of cadmium concentration i.e. 44.46%, 40% and 50.92%, respectively as compared to control. Therefore, the finding of the present study revealed the use of mixed culture or consortium of indigenous isolates is the better option for bioremediation of heavy metals.