خيارات البحث
النتائج 1 - 3 من 3
Research of treatment of wastewater from milk collection stations in sand filter
2008
Askinis, S., Lithuanian Univ. of Agriculture, Kaunas (Lithuania). Water Management Inst.
Highly polluted wastewater accumulates in milk collection stations. Its biochemical oxygen demand (BOD5) ranges from 369 to 1388 mg O2 lE-1. The average contamination was 600 mg O2 lE-1. There was a comparatively small amount of biogenic materials in it: total nitrogen – 27.3, total phosphorus – 5.0 mg lE-1. When variations of wastewater amounts are high, sand filters of vertical filtration are successfully used for the treatment of household wastewater. Model investigations were carried out to establish the possibilities of using these filters in treating wastewater in milk collection stations. The efficiency of wastewater treatment with these filters was 99.3% by BOD5, 99.1% – by suspended solids, 91.2% – by total nitrogen and 98.8% – by total phosphorus. According to the research results dependency equations were made; they were used to calculate the amount of main contaminants in milk collection stations that infiltrated through a layer of silt of diff rent thickness. The calculations showed that wastewater treatment to permissible limits is ensured by filtration through 0.6 m thick layer of sand. The average treatment level by BOD5 in such a filter of vertical filtration would be 20 mg O2 lE-1 and the treatment efficiency – 95.9%. Treatment efficiency of total nitrogen would be 88.1%, total phosphorus – 96.9, suspended solids – 95.5%. Preliminary research in the model showed that sand filters of vertical filtration can be used to treat wastewater from milk collection stations.
اظهر المزيد [+] اقل [-]Manufacturing and application studies of Sots pine bark pellets
2015
Spalvis, K., Latvian State Forest Research Inst. Silava, Salaspils (Latvia);Latvia Univ. of Agriculture, Jelgava (Latvia) | Daugavietis, U., Latvian State Forest Research Inst. Silava, Salaspils (Latvia)
This paper describes the use of Scots pine (Pinus sylvestris L) bark humus and fine fractions for animal litter pellet manufacture, and the efficacy of various additives in improving absorbency. In Latvia is no researches about litter pellet manufacture of pine bark, and possibilities of increasing water absorbency; in internationals research papers there is also no information about the possibilities of improving water absorbency of pine bark pellets with various additives. The additives tested were fresh and fallen leaves, tree needles, dried hogweed and sawdust. Pellets were manufactured with a ZLSP200B granulator at Adazi city, Latvia, in 2014. The results indicated that production of small diameter pine bark pellets could be problematic. Absorbency of the pellets was tested both by rinsing and soaking the pellets, and results were compared to woodchip particle litter pellets. It was found that the best absorbency was achieved with adding up to 30% sawdust, which increased pellet absorbency both by rinsing and soaking. The results indicate that it is possible to manufacture pellets using Scots pine (Pinus sylvestris L.) bark humus and fine fraction with good absorbency which can be disposed of in sewerage systems.
اظهر المزيد [+] اقل [-]Impacts of biocover composition on greenhouse gas emission
2023
Siltumens, Kristaps | Grinfelde, Inga | Burlakovs, Juris | Liepa, Sindija | Grinberga, Linda
It is generally estimated that gas, which generates more than half of the greenhouse gas (GHG) emission from waste industries in landfills, is seen as a serious environmental problem worldwide. It is therefore essential to promote management methods to reduce GHG emissions from landfills as well as other sources. One way of achieving this is the usage of different types of biocover applied to them. The aim of this study is to clarify the impact of the biocover created on GHG emissions. An experiment was conducted in laboratory conditions that studied the effectiveness of biocover developed in the laboratory. Three experimental columns with a diameter of 160 mm and a height of 1500 mm were created. Active compost saturated with water at a thickness of 500 mm was used as a source of methane, a permeable layer of sand at a thickness of 300 mm was further formed and finally covered with biocover. Biocover represented 60% of fine-fraction waste, 20% of soil and 20% of compost. The experiment was launched on June 6, 2022, and the first measurements were made two weeks later. All measurements were performed with the CRDS gas measurement device Picarro G2508 (Picarro Inc., USA California). All data analysis was carried out using Descriptive statistics methods. The largest reduction in emissions is projected directly for methane emissions, as biocover technology is appropriate to reduce methane emissions. Other GHG emissions are also expected to be reduced. NH3 emission measurements were also carried out to investigate the impact of the biocover on it. This experiment shows that the biocover created is effective and can be composed of material that has already been served. The experiment is intended to continue to obtain long-term data on the development of biotransformation and to develop more promising approaches in the future to reduce GHG emissions from landfills.
اظهر المزيد [+] اقل [-]