This paper discusses the continuous field view of representing geography and its role in forest inventory. Describing all forest attributes at any location or point and storing this information in digital databases, as an alternative to store forest compartments as vector polygons and associated attributes, is considered to be important for development of remote sensing and GIS applications for forest inventories. Main results achieved following this approach during the last decade in Lithuanian university of agriculture are described. Special research polygon near Kaunas was developed. Four auxiliary data sources (Spot Xi, Landsat TM, digital aerial photos and stand-wise inventory material), three estimators (two-phase sampling with stratification, the k-nearest neighbours and regression) as well as different methods for auxiliary data integration were examined to get point-wise forest characteristics. The lowest root mean square errors at a level of virtual sample point using optimal implementation tactics are – for mean diameter 24 %, height 18%, age 28%, basal area 37%, volume per 1 ha 40% and percentage of coniferous trees 29% of the mean value of corresponding forest characteristic. Integrating additional auxiliary information – characteristics of forest compartments, estimated during the conventional stand-wise inventory – and satellite images improved the overall estimation accuracy. Pre-stratification of sample plots using the attributes of compartments improved the estimation accuracy for certain stand groups. A new approach of segmentation, aimed to construct conventional forest compartments – estimation of point-wise forest characteristics for every pixel of satellite imagery and using them instead of original image values – was suggested and investigated.

Progeny testing of Scots pine in Latvia is carried out in only few locations, however, material from selections via seed orchards is deployed in various climatic and soil conditions, therefore concerns arise for influence of genotype environment interaction on levels of genetic gain. Problem is addressed based on 3 open pollinated progeny tests, consisting of 80 open pollinated families, located in 3 distant climatic regions in Latvia. Test age is 27 years, therefore not only growth, but also branch quality traits can be reliably analyzed. Strong genetic correlation (rb=0.80-0.94) among sites for tree height and diameter was found, but considerably weaker for branch traits like diameter of thickest branch (rb=0.52-0.67), average branch diameter, and sum of branch diameters (rb=0.41-0.49). Coefficients of additive genetic variation and coefficients of phenotypic variation among family means, determining potential of improvement via breeding, can be inflated by up to half, based on single site estimates for growth traits and double for quality traits. Backward selection based on results of several trials, in contrast to forward selection or utilization of single experiment results, could lead to improvement of branch traits close to the same as for growth traits (height and diameter). Single site narrow-sense heritability estimates for analyzed growth and quality traits are up to twice as large as across site estimates, indicating possibilities of serious bias in genetic gain estimates based on results from one test site. Testing at 4-5 sites for further breeding work is recommended.

Willows (Salix sp.) and reed canary grass (Phalaris arundinecea L.) (RCG) are fast growing perennial energy crop and potential cultures for recovering of cutaway peat lands. Cut away peat land soils are characterized by high acidity (pHKCl 2-3), high NH4**+1, and lack of P and K. Wood ash could be good liming agent and resource of potassium. Waste water sewage sludge (WWSS) compost is effective fertilizer and source of phosphorus. The objective of the study was to investigate the effect of application of WWSS compost and wood ash fertilizers of different doses on ingrown of willow cuttings and RCG in potted cultures. The wood ash addition of 10 g lE-1 and 20 g lE-1 to WWSS compost mix with peat from used query in proportions 1:1 and 4:1 were tested. The length of shoots and dry mass of shoots and roots were assessed to determine the effect of fertilization on growth of crops. Chemical analyses of growing media were performed to determine the content of main nutrient elements and pHKCl changes during season. The positive effect of fertilization on growth of crops was observed - an optimum dose for willows is (10 g lE-1) equivalent to 10 tDM haE-1 wood ash with mix of WWSS compost with peat. RCG produces more biomass in growing media containing largest doses of wood ash and WWSS compost premix. The willows produced bigger amount of biomass and accumulated more nutrients from growing media than RCG.

The vegetation of Pruno-Fraxinetum plant communities was described in 2004 – 2005 according to the Braun-Blanquet method throughout Latvia, in forests where common ash (Fraxinus excelsior L.) are dominant species in tree layer on moist soils. Classification of relevés (in total 52) by two way indicator species analysis (TWINSPAN) resulted in two variants of this association: typical variant (typicum) and variant with Filipendula ulmaria. Ellenberg indicator values were used to find out the relationship of flora with climatic (light, temperature, continentality) and edaphic (soil reaction, nitrogen, moisture) factors. Canonical correspondent analysis (CCA) was used to find out differences between two variants of Pruno-Fraxinetum. Results of this research have shown that these forests have complicated structure (form four vegetation layers, high species richness), which mainly depends on moist, rich eutrophic soils, usually with presence of limes. Main differential soil factors in ecological analysis are gradients of soil richness: moisture and nitrogen regimes. The influence of other factors was less expressed. Due to the human influence, especially drainage, the moist ash forests are decreasing and the species composition is changed. As Pruno-Fraxinetum forests in Latvia lie on the northern border of its distribution, the species composition differs from forests in the rest Europe; species characteristic determined by floodplain forests in Central Europe are absent.

Fire is a major disturbance in hemiboreal forests; it affects not only trees, but also ground vegetation. Previous studies have analysed the succession of ground vegetation after the fire, but not addressed the impact of the size of the burned area on revegetation of it. Therefore, the aim of our study was to assess the differences in post-fire ground vegetation in relation to the distance from the edge of the affected area. Vegetation data were collected using Braun-Blanquet method in three sites (122 sample plots) affected by forest fire and five clearcuts (not affected by fire) (92 plots), all regenerated by Scots pine 6 – 7 years before the assessment. The number of ground vegetation species (in all sites predominantly birds or wind dispersed) as well as their projective cover was not affected by the distance from the nearest edge of burned or clearcut, except in burned sites on dry sand soil (Vaccinosa and Myrtillosa), where herbaceous plant and shrub cover was decreasing (from 23.5% to 11.6%) and bryophyte and lichen cover – increasing (from 3% to 13.9%) with an increasing distance from the edge of the area. The total number of plants in burned areas was twice smaller than in clearcut in the same soil conditions but such large difference in projective cover was not observed. There were no significant differences between burned and clearcut areas in respect to Ellenberg’s indicator values on both soil types, as well as no trend in Ellenberg’s values for soil moisture in relation to distance from the nearest stand edge.

The impact of climatic and genetic factors on needle cast damage, as well as relationship between the degree of damage and survival and growth of trees was evaluated in the study. The analysis was done in two series of experiments, both established in two locations in Latvia (central and eastern part). Needle cast damage (in 5 grade scale) as well as the height and height increment, diameter of root collar and survival of trees were assessed. Results suggest that the degree of needle cast damage was influenced by the genetic, as well as climatic factors, and also their interaction. The average degree of needle cast damage in experiment of open-pollinated families was 4.7 ± 0.01 in central and 4.6 ± 0.03 in eastern Latvia; in the experiment of control-crossed families it was 4.6 ± 0.02 in central and 3.4 ± 0.04 in eastern Latvia. The impact of genetics on the needle cast damage degree was statistically significant (p is less than 0.05), and this effect was observed when any of growth traits (diameter, height or height increment) was used as a covariate in analysis. Results suggest the potential to select more resistant families, since the genetic correlation of grade of the damage between locations was significant (r = 0.40 - 0.72) and therefore improve also the growth of trees, since the grade of the damage had a negative correlation with growth traits both at provenance and family mean level (r = -0.69 and r = -0.42; p is less than 0.01).

Recent studies have demonstrated the occurrence of different needle cast (Lophodermium spp.) species in young Scots pine Pinus sylvestris L. stands in different regions of Latvia. The impact of these fungi has been known also historically, but is predicted to increase in future due to climate changes that are forecasted to have a positive impact on presence and vigour of various species of fungi. The aim of the study was to characterize the needle cast damage in young Scots pine stands in central Latvia. Material was collected in 12 Scots pine stands at the age of 3 to 26 years in 28 plots with a total area of 8.1 ha in the middle of two consecutive growing seasons (years 2012 and 2013). The impact of disease was visually assessed using a 5 grade scale, depending on the proportion of damaged (brown) one-year old needles. Incidence of damaged trees (P, %) and damage intensity (R, %) was calculated and used to characterize the occurrence and severity of the infection in the stands as well as its link to other stand parameters. Damage incidence (ranging from 20 to 100%), as well as the intensity (from 4 to 35%) was slightly (incidence-also significantly) higher in 2013 in comparison to 2012; correlation between those two parameters was strong in both years (r = 0.94 and r = 0.84, respectively). The stand age, density (ranging from 1200 to 6900 trees haE-1) and tree height did not significantly correlate with the damage incidence or intensity. Forest type (Hylocomiosa or Myrtillosa mel.) was not a significant factor, too.

Wood based ash can be used as a liming material and fertilizer in forest, thus providing a solution for utilization of wood ash and formation of additional increment of trees, especially on organic soils, where lack of potassium and phosphorus is a well-known factor limiting the growth of trees. Yet, many studies have been made with adverse results mostly because of different soil types and species investigated. However, by now the best results on fertilization with wood ash have been found on drained peatlands, where some nutrient deficiencies have emerged. The aim of this study was to find out the growth response of Norway spruce on drained organic soils after spreading of potassium sulphate (K2SO4) and wood ash (WA). The experiment was carried out in three middle aged Norway spruce (Picea abies) stands on drained mineral and peat soil. Experiment consisted of three replications of each treatment in each stand including WA, K2SO4 and the control on 400 square meter sub-sample plots each. The diameter and height of trees were measured. The samples of increment cores were collected 4 years after fertilization to determine the additional volume increment, which varied from 8.5 m**3 haE-1 in WA plots and from 9.7 m**3 ha-1 to 17.2 m**3 haE-1 on K2SO4 plots. Both - the wood ash and potassium application - significantly increased the increment of Norway spruce on drained mineral and peat soil, although no significant differences were found between the treatments (p = 0.82, α = 0.05).

Recently, a renewed interest in non-harmful, environmentally friendly adhesives has ensued among the industry professionals, both environmental and healthcare scientists. In this study, organic rich lake sediments (sapropel) from two lakes located in Latgale Region of Latvia were used as a glue to investigate the potential use of such adhesive for manufacture of composite materials from wood. Sapropel is a valuable resource with multiple areas of application, e.g., agriculture, balneology. Available amount of sapropel in Latvia is estimated at up to 2 billion m**3. Prior the tests, characterization of sapropel samples was done. Properties of the obtained composite material samples from wood and sapropel, as well as the mechanical properties were investigated. Tests involved the assessment of static bending strength and shear strength tests, durability according to their operating performance (D1-D4), as well as dried natural peat tensile strength perpendicular to the grain direction were determined and compared to the literature data; and the opportunities to use new composite materials in accordance with to the standards were discussed. The results of the study revealed an insight into possibilities to develop products of higher added value from sapropel as adhesive in combination with various resources. Results indicated that the samples made from Lake Pilvelis sapropel gain to better results of bending strength determination (parallel bending - 88.7 MPa). The aim of this study was to explore options to produce veneer using two kinds of sapropel as a glue and to determine the optimal properties according to the standards, as well as to characterize properties of the obtained composite material.

As worldwide trends are changing gradually and sustainable resources economy and reduction of hazardous emissions are coming to the forefront, several industry sectors are forced to revalue their resource consumption. The main emphasis is currently placed on the recycling of by-products. One of the methods, definitely, includes burning of by-products to generate power, however it is not always the most efficient one. By-products must be used in the manner that ensures that they provide high added value for the operation of the company and are environmentally friendly. This research focuses on the use of the by-products of birch (Betula) veneer manufacturing, in order to obtain thermal insulation material. The following characteristics of the wood fibre insulation material were determined: thermal conductivity, water absorption, vapour permeability, and prototype reaction to fire. The characteristics of the obtained wood fibre thermal insulation material: thermal conductivity 0.038 W•mE-1•kE-1; water absorption 12 kg•mE-2; the conformity of the material even to D fire reaction class was not determined. The principal conclusion: the wood fibre thermal insulation material conforms to the requirements set for thermal insulation materials.