Tourism development contributes to the vitality of rural areas: it increases employment opportunities for residents, promotes the development of relations among different business entities and attractiveness of rural environment. In this article, the situation regarding the development of one type of tourism – educational tourism – in Lithuanian rural areas, factors encouraging and limiting this development have been analysed. The research question is what are the main problems regarding the development of educational tourism in rural areas. The aim of the research is to present relevant solutions after the analysis of the problems regarding the development of educational tourism in rural areas. Theoretical research was performed while applying methods of content analysis and synthesis of scientific literature and other researches. The method of case analysis was chosen to describe the state of the development of educational tourism and to identify main problems. In total 18 cases were analysed (18 providers of the educational tourism services in rural areas). In order to collect necessary information, methods of semi-structured interview, analysis of secondary informational resources and direct participation in researched educational programs were applied. The development of educational tourism is promoted by the factors related to the environment of manor, historical place or nature as well as professional qualification, working experience, enthusiasm and ability to be flexible about customers’ needs of actors responsible for rural development. Volatility of demand regarding educational programs, lack of specialists and challenges related to cooperation were identified as problematic issues.

Urban-rural income convergence provides an opportunity to reduce the income inequality, ensuring cohesion and increasing economic output. The results show that urban-rural income convergence is a continuous tendency in the EU; the urban-urban income gap declines – rural population received 79% of net income of population living in cities in 2017 (in 2010 it was 69%). The rural population accounts for 27.3% of the EU and any changes have notable impact on the rest of the economy. Nationally the urban-rural income convergence dramatically differs amid the EU countries. In order to model an impact of urban-rural income convergence, a comparative-static approach that involves an input-output model is applied. Two scenarios are estimated for Latvia’s economy: rural net income in Latvia is assumed to be 89% of cities net income (as in the Euro Area average) in both scenarios, in the first one the saving rate is constant; in the second rural households anticipate the additional net income as a gift (saving rate for extra net income is equal to zero). The results of the first scenario argue that households final demand expenditures increase by 4.5%, output by 2.7%. The largest increase of output is modelled in chemical products (8.9%), paper products (8.7%), electrical equipment (6.2%), pharmaceutical products (6.1%), and textile (5.8%) industries. In the second scenario, the output increase: 3%. The results certify that the increase and convergence of income in rural areas are important even in advanced economies, such as the EU countries. The national and EU policies are welcome and can give notable impact on economic growth.

In a period of economic prosperity, the real estate market is very active. The demand for real estate is causing the growth of prices, thus inducing people to sell their properties. As the easiest and often most convenient way of selling the property is partnering a real estate company, even 95 per cent of sales are provided through the mediation. However, the increasing demand in services is often leading to the decrease in service quality. It is worth mentioning that, while the amount of real estate agencies is increasing, service quality becomes the main competitive advantage for companies. In order to contribute to a body of knowledge on service quality, this research deals with a problem: what service quality is provided by real estate agencies to farmers selling their properties, and what service quality dimensions have to be improved. The research aims to establish the undermanaged dimensions of service quality obtained by Lithuanian farmers selling their property through real estate agencies. The determination of latter dimensions is crucial for real estate agencies achieving to successfully compete in the market of real estate in Lithuania. In order to reach the aim of the research, previously elaborated service quality models were analysed and adapted to a current research framework. The questionnaire survey was provided to establish a model of service quality real estate agencies expected by farmers selling their property. Finally, the four-dimensional REASQ model was established.

In a landscape of increasing customer/firm interactions in digital space, content marketing, which aims to generate prospects and sales to foster customers’ brand engagement, brand awareness and trust, is on the rise. Notwithstanding, despite significant marketing specialist interest, scientific content marketing research is not widely developed. Therefore, it encourages the need for new studies in the content marketing field. This paper introduces theoretical and practical aspects of content marketing decisions for the creation of desired customer value in the tourism sector. The aim of the presented research is to determine which combinations of content marketing decisions could create the desired value for the customer in the tourism sector. Understanding the content marketing decisions that create the desired value for customers could lead to a proper implementation of content marketing in the tourism sector. The presented results of q-sort study indicate twelve different combinations of content marketing decisions which could be used by tourism organizations in order to create desired value for their customer. Thus, it means that increasement of desired customer value can be made in the light of content marketing usage. The paper ends with insights, conclusions, limitations and future research possibilities.

Norway spruce (Picea abies (L.) Karst.) is economically important tree species, vulnerable to impact of different biotic (cervids, bark beetle etc.) and abiotic (wind, wet snow etc.) factors and their combinations, expected to increase in frequency and/or magnitude in future due to climate changes. The aim of the study was to characterize occurrence damages in Norway spruce stands in Latvia. Data from 635 National forest inventory sample plots were used in the analysis, thus providing the information primarily on the non-lethal damages, since the dead trees in most of the cases would be removed from the stands in sanitary cuts. Damages were reported for 11.6 ± 1.1% of spruces from total basal area of spruces in the assessed pure and mixed stands. Admixture of other tree species or soil (group of forest types) had no significant effect on the proportion of damaged spruces. Also, no statistically significant differences in dimensions were observed between damaged and undamaged trees. The major cause of damages was browsing (three quarter of damaged spruces, in contrast to only one-quarter of the rest of the trees) and the highest proportion of damaged spruces were in stands in the age group 41 – 80 years, significantly differing from that in younger (up to 20 years) stands, demonstrating both the preferences of cervids to a certain dimensions of spruce as well as accumulation of damages over time.

Plywood overlaid with resin impregnated paper films is used in various decorative applications for which high stability of aesthetic qualities is of great importance. The top veneer of the plywood for these materials is perfectly protected from a direct contact with water as far as the covering film is not damaged. However, in case of film damage water can cause clearly visible defects in a relatively short period of time. To reduce these types of defects, unsophisticated and efficient way was developed. It involves filling the vessel system of the top veneer with industrial phenol-formaldehyde resin by using a hot-press. Influence of some phenol-formaldehyde resin properties on its penetration in birch veneer as well as the effect of wood moisture content were tested. The proposed top veneer pre-treatment method with phenol-formaldehyde resin reduced the average swelling zone distance from damage site by half for oven pre-dried plywood with 3% moisture content before treatment. Moreover, it was found that using plywood with moisture content of 9% the swelling zone distance was reduced by two thirds compared to untreated overlaid plywood.

In this study, antifungal properties of an organoclay additive were investigated. Two types of organoclay (red and white) were tested in Petri dishes to determine their toxicity against the brown rot fungus Coniophora puteana and the white rot fungus Trametes versicolor. Red organoclay was more efficient than the white one and, depending on the fungus, inhibited or stopped the fungal growth. Red organoclay was chosen as an additive to produce a new type of plywood product. Biological durability of this plywood product was determined according to the methods: NF B 51-295 (bending strength test) and LVS ENV 12038:2002 (mass loss test). The loss in bending strength exceeded 81% and 65% after exposure to brown and white rot fungi, respectively. The mass loss of the plywood product after the decay test was higher than 3%, which defined the material as not fully resistant against decay fungi. According to CEN/TS 15083-1:2005, the plywood product corresponded to the durability class 3 (moderately durable) to 5 (not durable) depending on the fungus.

Birch plywood has proved itself to be one of the most rational ways of wood processing. Growing demand of high performance birch plywood products requires a complex numerical analysis based on Finite Element Method (FEM), instead of using simple analytical assumptions, which prevent optimization of plywood construction (lay-up). In the research samples of birch plywood of several thicknesses, both sanded and non-sanded, with fibre direction of external veneer both in the longitudinal and transverse directions were tested. An extensometer and optical strain gauge were used for strain measurement. The FEM analysis, using commercial software SolidWorks Simulation Premium (SW), versus experimental bending and tension testing according to LVS EN 789 was carried out in this paper. The analysis of results indicates that there is a high correlation between the results of the experiments and the FEM. Particularly for in tension loaded specimens one can be tested up to the maximum ply strength (100 MPa); meanwhile, in bending up to 71MPa – the average stress in load bearing ply at the proportionality limit. Due to software restrictions, shear stresses cannot be evaluated. Future studies are considered to investigate terms for designing plywood with dynamic properties of strength and stiffness to be taken into account.

Green infrastructure (GI) is a strategically planned network of high quality natural and semi-natural areas and provides a range of ecosystem services and protects biodiversity in urban settings. It is very important to increase understanding of the role of GI from a scientific and a socio-economic perspective. The main goal was to understand and assess the ways that tourists use from experiencing urban green infrastructure in the cities they visit. An interview questionnaire survey took place among tourists of the following countries and cities: Latvia (Riga and Jelgava) and Portugal (Lisbon and Faro). The questionnaire includes perception, psychological aspects and preferences, behaviour and activities and general questions as well as biographical information about tourists. The study represents that no significant differences have been found between respondent groups in Latvia and Portugal. The results of the survey show that in future there is a need to improve the linkage between GI and social-cultural activities in cities. Therefore, studies for tourists’ perceptions, preferences and uses of GI will provide the alternative management approaches for urban planning and tourism development in future.

The aim of research was to determine peculiarities of relations between mature layer of the stand with distribution of spruce (Picea abies. Kr.) regeneration according phenology forms and growth specifics. The study examined the success of the resumption of spruce in the Leningrad region under the canopy of the parent stand. In stands with different share of spruce and in various forest-typological conditions, the features of the relationship between the maternal canopy of the stand, the distribution of the natural resumption of spruce by phenological forms and its course of growth were investigated. The account of the undergrowth was carried out by two methods: continuous reading and selective-statistical method. Regardless of the state of viability of spruce undergrowth, the increase in success of regeneration goes from a late vegetation season growth start form to an early one. Under the canopy of the maternal tree stand, young spruce of the early form has the best growth and development indices. In general, under the canopy of spruce stands, the annual height increment in spruce undergrowth, regardless of the phenological structure, the size categories and the state of viability, is greater than under the canopy of pine, pine-spruce and birch-spruce stands. The best characteristics of spruce undergrowth, regardless of phenological forms in vaccinio-myrtillo-pinetum type of forest are described. When analysing the characteristics of spruce undergrowth under the canopy of the stand, taking into account the phenological and altitudinal structure, and the state of viability, it was revealed that at the average age prevailing in the spruce undergrowth of the transitional form, the best parameters of growth have small and medium forms and growth in the early form. Analysing the characteristics of spruce undergrowth under the canopy of the stand, taking into account the phenological and height structure, as well as vitality status, it was revealed that at average age, dominating for the spruce undergrowth of transitional form, the best parameters of small and medium groups of undergrowth has early vegetation season growth start form. The best parameters of the growth have a large group of undergrowth of late vegetation season growth start form.