Seed maturation in hemp is not homogeneous, and the harvest is done when the seeds are 70-80% mature. This study was carried out to determine the germination and emergence performance of hemp (Cannabis sativa L.) seeds at different maturation stages. Mature, semi-mature and immature seeds were used as material in the study. The study was carried out as two separate experiments, germination and emergence. The germination test was carried out in petri dishes and the emergence test in viols. Both experiments were carried out according to the randomized complete block design with 3 replications. Germination rate (%), shoot and root length (mm), shoot and root fresh weight (mg plant-1) and shoot and root dry weight (mg plant-1) parameters were investigated in the germination study. In the emergence study, the emergence rate (%), seedling and root length (mm), seedling and root fresh weight (mg plant-1), and seedling and root dry weight (mg plant-1) values were examined. In the germination study, semi-mature seeds germinated but did not develop. Therefore, no data could be obtained from other parameters except germination rate. In germination study, germination rate varied between 6.67 and 84.67%, shoot length 27.2-38 mm, root length 39.4-50.8 mm, shoot fresh weight 30.66-49.89 mg plant-1, root fresh weight 4.32-7.69 mg plant-1, shoot dry weight 3.25-7.99 mg plant-1, root dry weight 0.68-2.03 mg plant-1. In the emergence study, emergence rate ranged between 5.18-82.69%, shoot length 68-136.4 mm, root length 37.4-69.6 mm, shoot fresh weight 60.33-154.80 mg plant-1, root fresh weight 27.30-46.73 mg plant-1, shoot dry weight 3.97-10.24 mg plant-1, root dry weight 2.61-5.43 mg plant-1. In both experiments, the highest values obtained from all the examined traits were obtained from mature seeds. In both studies, the highest values were obtained from mature seeds for all traits examined. Semi-mature and immature seeds gave similar results in terms of the traits examined.

In a lab experiment using seed priming, the faba bean (Vicia faba L.) seed germination and seedling development were studied. Twenty different priming techniques were utilized in the study, each comprising varying concentrations of NaOCI, CaCl2, KNO3, Manitol, PEG, KCL, H2O and a control group that received no priming. Four replications of a completely randomized design (CRD) were used in the experiment. Among the three priming treatments, there were substantial differences in the seedling growth metrics and germination rate. When 500 ppm NaOCl was used as a treatment, the highest seed germination percentage (96%) was attained. Although 100 ppm PEG had the greatest germination index (42.92), 10000 ppm NaOCl had the quickest mean germination time (8.27). Additionally, at a concentration of 1500 ppm NaOCl, the greatest seedling vigor index (29.79) and maximum germination coefficient (12.28) were likewise obtained. With H2O treatment, the maximum shoot length (21.09 cm) was observed for seedling growth parameters. The largest root length was produced by a 10000 ppm KNO3 treatment (11.19 cm). With 20000 ppm KNO3, the maximum root dry weight was achieved (88.50 mg), whereas H2O produced the highest shoot dry weight (51.0 mg). Additionally, it was discovered that a treatment with 10000 ppm KNO3 had the best root-shoot ratio (0.72). The research thus supports the possible use of seed priming as a method to improve faba bean seed germination and seedling growth. NaOCl and KNO3 seemed to work best for faba bean seed germination and seedling growth.

This study was conducted as both petri dishes and pot experiments on four different salt-sensitive cotton genotypes (Laser, May 505, May 455 and Selin) in order to investigate the role of exogenous salicylic acid applications in reducing the effects of salt stress. Six saline treatments; 0, 30, 60, 90, 120 mM NaCl were used. Each group divided into three sub-groups (hydo-primed control, 0.5 mM and 1.0 mM SA) on the basis of seed priming treatments. They were applied in three replications according to the randomized block design. In all genotypes, 90 mM and 120 mM salt stress negatively affected germination and seedling development. In salt stress up to 60 mM, it was recommended to May 505 and Selin genotypes with 0.5 mM salicylic acid pre-application to the seeds.

In a lab experiment using seed priming, the faba bean (Vicia faba L.) seed germination and seedling development were studied. Twenty different priming techniques were utilized in the study, each comprising varying concentrations of NaOCI, CaCl2, KNO3, Manitol, PEG, KCL, H2O and a control group that received no priming. Four replications of a completely randomized design (CRD) were used in the experiment. Among the three priming treatments, there were substantial differences in the seedling growth metrics and germination rate. When 500 ppm NaOCl was used as a treatment, the highest seed germination percentage (96%) was attained. Although 100 ppm PEG had the greatest germination index (42.92), 10000 ppm NaOCl had the quickest mean germination time (8.27). Additionally, at a concentration of 1500 ppm NaOCl, the greatest seedling vigor index (29.79) and maximum germination coefficient (12.28) were likewise obtained. With H2O treatment, the maximum shoot length (21.09 cm) was observed for seedling growth parameters. The largest root length was produced by a 10000 ppm KNO3 treatment (11.19 cm). With 20000 ppm KNO3, the maximum root dry weight was achieved (88.50 mg), whereas H2O produced the highest shoot dry weight (51.0 mg). Additionally, it was discovered that a treatment with 10000 ppm KNO3 had the best root-shoot ratio (0.72). The research thus supports the possible use of seed priming as a method to improve faba bean seed germination and seedling growth. NaOCl and KNO3 seemed to work best for faba bean seed germination and seedling growth.

Salinity, which is one of the abiotic stress factors, severely restricts plant production as a result of the negative effects of plants in different growth and development periods. Therefore, it is extremely important to determine the tolerance limits of plants to salinity in order to eliminate the limiting effect in terms of plant growth. Flax is an industrial plant that is used for multiple purposes and has commercial importance in the world. This research was carried out in controlled laboratory conditions in 2021 to determine the effects of salinity on the germination of flax seeds. In the study, germination rate, root length, root fresh weight, shoot length and shoot fresh weight were evaluated. The result showed that significant differences between different NaCl solutions for all evaluated characters. Although the highest value was obtained in the control group in Mures variety, the highest value was obtained in 25 nM NaCl concentration in all other characters except for the germination rate in Dakota variety. The highest germination rate of 93.3% was obtained from the control application (0 mM NaCl) in both varieties. On the other hand, there was no germination in both varieties in 200 mM application.

A field-based experiment was carried out in Rukum (East), Nepal, from February to June 2020, to assess the effect of different pre-sowing treatments on germination of Persian walnut. The experiment was carried out in a randomized complete block design with six treatments and four replications. The treatments included hot water treatment, chilling stratification only, cracking + Gibberellic acid (500ppm) followed by chilling stratification, cracking + Gibberellic acid (750ppm) followed by chilling stratification, Gibberellic acid (500ppm) + chilling stratification and Gibberellic acid (750ppm) + chilling stratification. The minimum days for germination (15.75 days) and highest germination (53.25%) were obtained when the combination of cracking with GA3 @ 750 ppm along with chilling stratification was done. The maximum shoot length (34.83 cm) was observed in the combination of cracking with GA3 @ 500 ppm followed by stratification but statistically similar shoot length (34.63 cm) was observed when cracking, application of GA3 @ 750 ppm followed by stratification was done. Cracking, treatment with GA3 @ 500 ppm followed by chilling stratification resulted in the highest shoot fresh weight (11.93 gm) and root fresh weight (10.77 gm) compared to the other treatments used. Thus, cracking along with treatment by GA3 @ 750 ppm followed by chilling stratification could be suggested to the walnut growers for better germination and a better morphological and physiological status of the rootstocks/seedlings.

This study has been carried out in 2017-2018 in order to determine seed dormancy and effective germination depth wild mustard (Sinapis arvensis L.). The in-vitro dormancy breaking experiments (tip breaking, sanding, H2SO4 application, holding in flowing and still water, GA3, KNO3 and GA3+KNO3 combination application) has been applied to wild mustard seeds collected from wheat field in Tokat province and has been applied to wild mustard seeds collected from wheat field in Tokat province and the most effective method was determined as 1000 ppm GA3+KNO3 with 98% impact on seed germination at 15°C within 72 hours. In contrast germination rate has been calculated as 5% in control plants. Furthermore 15°C was assessed as optimum temperature for seed germination was the most effective temperature and during depth studies 100% of wild mustard seeds germinated at 3-5 cm. Because of the difficulies with the work with seeds and plants that have dormancy, these data will contribute future studies.

A field-based experiment was carried out in Rukum (East), Nepal, from February to June 2020, to assess the effect of different pre-sowing treatments on germination of Persian walnut. The experiment was carried out in a randomized complete block design with six treatments and four replications. The treatments included hot water treatment, chilling stratification only, cracking + Gibberellic acid (500ppm) followed by chilling stratification, cracking + Gibberellic acid (750ppm) followed by chilling stratification, Gibberellic acid (500ppm) + chilling stratification and Gibberellic acid (750ppm) + chilling stratification. The minimum days for germination (15.75 days) and highest germination (53.25%) were obtained when the combination of cracking with GA3 @ 750 ppm along with chilling stratification was done. The maximum shoot length (34.83 cm) was observed in the combination of cracking with GA3 @ 500 ppm followed by stratification but statistically similar shoot length (34.63 cm) was observed when cracking, application of GA3 @ 750 ppm followed by stratification was done. Cracking, treatment with GA3 @ 500 ppm followed by chilling stratification resulted in the highest shoot fresh weight (11.93 gm) and root fresh weight (10.77 gm) compared to the other treatments used. Thus, cracking along with treatment by GA3 @ 750 ppm followed by chilling stratification could be suggested to the walnut growers for better germination and a better morphological and physiological status of the rootstocks/seedlings.

In this study, the effects of the extracts obtained from flower, stem, leaf, branch and their mixture of Nerium oleander L. on the seed germination and seedling growth of four Pistacia species (Pistacia terebinthus L., P. vera L., P. khinjuk Stocks., P. atlantica Desf. and P. terebinthus L.) were investigated. Five hundred grams of N. oleander was taken from the plant parts and the extracts were mixed with distilled water (1.5 L). The extracts were applied to Pistacia species for 24 and 48 hours. The results showed that the extract had positive effects on their germination and growths of the species mentioned above. The highest germination rate for all the Pistacia species was obtained from the extracts of flower, while the lowest germination rate was recorded in the mixture of all parts of N. oleander mentioned above. Moreover, the treatment time was found to reduce the germination ratio. It was also found that the extracts from the stem of N. oleander were the most effective on the stem height of the Pistacia species studied. It was followed by the extracts from branches, leaves and flower, respectively. Furthermore, the findings indicated that the extracts from the stem of N. oleander had pronounced effect on the stem diameter of the Pistacia species studied. It was followed by the extracts from flower, leaves, and branches, respectively. In general, the effects of the extracts from several parts of N. oleander on the germination and other growing parameters were found to be almost comparable to those of synthetic promoter, Gibberellic Acid (GA3).

Pinus brutia Ten., Red pine, known to be tough drought resistant pine specie, could effectively be used for afforestation of disturbed areas. It is of great interest for the afforestation in arid zones. Appropriate seed sources for the specific areas guarantees reforestation success. Away from its native areas Pinus brutia Ten. is planted for its ornamental value and timber production purposes. Selection of drought resistant provenances can very well increase the survival success. In this study, the effects of water potential on germination were studied in fourteen provenances of Pinus brutia Ten. from Turkey. Water potentials between 0 and -8 bars were obtained using polyethylene glycol 6000 (PEG-6000) solutions. Seeds were kept for 35 day at 20 ± 0.5°C. A decrease in water potential produced a marked reduction in germination percentage and germination value. As a result, significant variations between the provenances were found. It was determined that, under a -8 bar water stress, Isparta-Bucak and Mersin-Silifke, respectively corresponding to 58% and 57% of the control group, were the least water stress affected provenances.