خيارات البحث
النتائج 1 - 3 من 3
Spatial Variability and Mapping of Selected Soil Physical Properties under Continuous Cultivation
2023
Sufiyanu Sani | Aliyu Abdulkadir | Salihu A hmad Pantami | Mahmud Sani | Ali Muhammad Amin | Muhammad Yakubu Abdullahi
Assessments of Soil physical properties and estimation of their associated variability are essential for making site-specific decisions on soil and crop management This study examined the spatial variability of soil hydro-physical properties and variance structure at Sector F1 of the Jibia Irrigation project Katsina State, Nigeria. Grid sampling technique was used to obtain one hundred and forty-four (144) soil samples from 206 ha of land using Google earth. The grids were drawn using Google earth software at intervals of 150 m x 150 m. Surface soil samples (0 - 20 cm) were collected at grid intersection points. The collected soil samples were air-dried and passed through a 2mm sieve, and analyzed using standard laboratory procedures for physical parameters. The ArcGIS software package 10.3 was used to model the variance structure of Sand, Silt, Clay, Bulk density, Particle density, Percent total porosity and Organic Matter (OM). Results obtained revealed that the coefficient of variation (CV) ranged from 5.724% in particle density to 109% in clay. The Semivariogram showed that the range of spatial dependence varied from 0.342m for (Dry mean weight diameter) to 9.3m (Organic matter) for all measured soil properties. High Spatial dependency ratios were observed for Bulk density, Sand, Silt and clay contents. Particle density exhibited moderate spatial dependency (Nugget to sill ratio 0.25 – 0.75%). Wet Mean weight diameter and organic matter content have a weak spatial dependency. The results indicated that sandy textured soils dominated the greater part of the study area with low to moderate organic matter content. The soils being sandy-dominated has a high infiltration rate and low ability to retain moisture and nutrients were observed as the major characteristics of the soil of the study area.
اظهر المزيد [+] اقل [-]Effects of Different Processing Techniques and Sol-Gel Coating on Physical Properties of Starch and Clay-Based Biocomposite Material
2024
İsmail Hakkı Tekiner
This study investigated the effects of different processing techniques and sol-gel coating on the physical properties of biocomposite material. Two dispersion series from corn starch, clay, and sorbitol were prepared by conventional and microwave-assisted processing, and casting technique. One film from each series was sol-gel coated by immersion. All the samples were subjected to moisture content (MC), water solubility (WS), water absorption (WA), FT-IR, DSC, and SEM/digital microscopy tests. The results showed that the coated films contained higher MC (11.5±0.5%) than the non-coated films (5.3±0.6%) and absorbed less water (44.7±12.4%), compared to the non-coated ones (166.3±2.5%). Non-coated films exhibited less solubility in water (26.1±0.2%) than the coated ones (51.0±0.7%). FT-IR test detected cross-linking (1723 cm-1 ester) in the microwave-assisted coated film. The sol-gel coating increased the latent heat of melting and specific heat values by 14.9% and 19.4% for conventionally fabricated samples, and 22.3% and 25.3% for microwaved films, respectively, whereas it reduced the temperature of melting by 23.1% for conventionally fabricated ones, and 6.6% for microwaved ones. Microscopic tests revealed that microwaved compact morphology indicated better gelatinization of starch. Overall, microwaving and sol-gel coating need further investigation to improve the physical properties of biocomposite materials for food packaging.
اظهر المزيد [+] اقل [-]Bioactive, Physicochemical and Antimicrobial Properties of Koruk (Unripe Grape, Vitis vinefera L.) Products
2021
Berna Öztürk | İlkin Yücel Şengün
In the study, the bioactive, physicochemical and antimicrobial properties of koruk juice and dried koruk pomace were investigated. The total phenolic contents of koruk juice and pomace were determined as 1119.670 and 1182.170 mg GAE/L, respectively. Higher DPPH radical scavenging activity found in koruk pomace, which was consistent with total phenolic contents. Organic acid, total sugar and ascorbic acid contents of koruk juice (3.44%, 4.737 g/L and 2.559 mg/100 mL) were higher than koruk pomace (0.19%, 0.866 g/L and 0.242 mg/100 mL). The counts of Total Psychrophilic Aerobic Bacteria and mold-yeast in pomace were determined as 0.694 and 1.016 log CFU/g, respectively, while no growth was observed in koruk juice. Koruk juice and pomace indicated antimicrobial effect on all test microorganisms in the range of 31.3-500.0 µg/mL (Minimum Inhibition Concentration). The most sensitive bacteria to koruk juice were Bacillus cereus, while Pediococcus acidilactici was the most sensitive one to koruk pomace. Koruk juice also showed bactericidal effect on all test cultures at concentration ranging between 250.0 and 500.0 µg/mL (Minimum Bactericidal Concentration), koruk pomace was not showed bactericidal effect on Escherichia coli O157:H7, Salmonella Typhimurium, E. coli and B. cereus. This study demonstrated that the koruk products could be used in food applications as natural antioxidant and antimicrobial substance.
اظهر المزيد [+] اقل [-]