The Central Anatolia Region is one of the seven geographical regions which are 151 thousand square meters of surface area and it is about 21.0% of Turkey's land area. The population rate of cattle breeds in the Central Anatolia Region is 20.4% exotic cattle breeds, 19.1% crossbred, 11.6% native cattle breeds and total 18.1% in Turkey. The Central Anatolia Region cattle population is consists of 43.9% of exotic breed, 43.5% crossbred and 12.6% the native cattle breeds. The population of exotic cattle breeds (69.5%) in Nigde province is the first place and followed by Eskisehir provinces rate of 65.6% in the Central Anatolia Region. The rate of crossbred cattle population is the highest rate (65.0%) province of Sivas and followed by Çankırı province (62.8%). Ankara and Yozgat province has the highest rate of native cattle breed 28.3% and 25.5%, respectively. The total populations of cattle breeds in Konya and Kırıkkale provinces were found maximum 518.291 cattle and minimum 45.426 cattle, respectively, in the Central Anatolia Region. The population rate of exotic and crossbred cattle breeds has increased 67.0% and 11.8%, respectively, while population rate of native cattle breeds has decreased 30.3% from 2007 to 2011 in the Central Anatolia Region. The 20.1% of sheep, 8.2% of goat and 18.3% rates of total livestock population in Turkey are in the Central Anatolia Region. The population rate of sheep and goat of the Central Anatolia Region is 20.1% and 9.5%, sheep and goat respectively and 18.3% total in Turkey. The 70.9% for Angora goats, 8.2% hair of goats, and 17.7% indigenous of sheep breeds and 66.0% crossbreed to national Sheep and Goat population has risen in the Central Anatolia Region. All of these results are evaluated, Central Anatolia Region, Turkey, the contribution of animal products grown by population of cattle and small ruminants is important and can be considered a center of attraction for investment in animal breeding

Although there is no a significant increase in the cultivation areas of oil crops in last two decades, production amount of them shows 52.2% increase. Sunflower which has the first rank in terms of cultivation area and as well as production in cultivation of oilseed crops in our country, comes to fore as basic oil plant in Central Anatolia Region and it is followed by safflower in rank. Becoming widespread of safflower cultivation in fallow fields will make great profits to as well as farmers in the region and as well as country's economy in central Anatolia Region of Turkey which is 59% of total Turkey in term of fallow fields.

It is now clear that over use of pesticides and intensive management of orchards can lead to drastic declines in apple pollinator abundance and crop failures. During the period of study a grower’s survey was conducted to know about knowledge of farmers on native insect pollinators, pollinator management practices, their perceptions of the importance and utility of native pollinators, and their attitudes regarding pesticide application. Despite of having significant knowledge of managed pollination, only few farmers (2%) adopted supplementary methods of pollination (renting honey bee colonies, hand pollination etc.). In Pulwama, 60% of farmers had knowledge about native insect pollinators and 40% did not have any idea of native pollinators and in case of Shopian, the figures were fifty-fifty i.e. 50% had knowledge about native insect pollinators and 50% were unaware. During the period of investigation, native insect pollinators were sampled from different apple orchards under different management systems in early spring during apple flowering. A total of 17 species of insect pollinators belonging to 11 families and 3 orders_ Hymenoptera, Diptera and Lepidoptera registered their occurrence at all the studied apple orchards of the Kashmir Valley. At all the study sites i.e. apple orchards under different management systems, family Halictidae and Empididae registered their presence as dominant groups. The % family contribution of the former at different orchard types decreased with increase in the intensity of the management system and the % family contribution of the later however, showed a direct relationship with the management system found, i.e. the more intense the system, the more abundant was the group. Other groups in general did not show any greater differences in abundances at different sites studied.

In order to study the quantitative variability of malting quality-related traits and to determine the genomic locations which control these traits, an experiment was conducted using one hundred fifty double haploid (DH) lines of barley and their two parents ‛Steptoe’ & ‛Morex’. Protein content (%) was measured using Kjeldahl method, diastatic power calculated with Lintner formula, Malt extract was measured for each by special weight achieved and based on Malt Berix Charts. Transgressive segregation in both directions was observed for all traits. Genetic map is fairly saturated and comprising 327 RFLP markers with a total length of 1226.3cM with an average marker spacing of 3.75cM. Seventeen QTLs by LOD≤2(LRS≤9.21) controlling different studied traits were identified for all studied traits. Total phenotypic variance explained by these QTLs varies from 23.2 to 45.05%. Highest LOD scores were obtained for QTL’s controlling diastatic power (Qdip3Ha) on chromosome 3H, and lowest LOD scores were obtained for QTL’s controlling seed yield per plant (Qsyp1Hb) on chromosome 1H. Therefore gain through marker-assisted selection (MAS) in this population would be limited and some of the “Steptoe× Morex” population was developed with the intention of isolating and advancing barley lines for release to the malting quality.

Concentrations of selected metals (Cu, Cd, Ni, Pb, Mn, Fe, Zn, Cr and Co) in some ready-to-eat-foods consumed in Nigeria were investigated with a view providing information on the risk associated with the consumption of these products. The concentrations of metals (mg.kg-1) in these ready-to-eat-foods are in the ranges of 2.4 – 5.2 for Cu; 0.1– 0.8 for Cd; 0.7 – 4.0 for Ni; 8.1 – 53.7 for Fe; 8.9 – 20.0 for Zn; 0.1 – 3.8 for Pb; 5.1 – 14.4 for Mn; 0.83 – 21.4 for Cr and 0.20 – 1.32 for Co. The concentrations and estimated intakes of Cd, Ni and Pb in some of these food types exceeded the permissible limits and tolerable daily intake respectively. The target hazard quotients (THQ) for the individual metals indicate levels of concern for Ni, Cd, and Co in some of the ready-to-eat-foods. The combined THQ values for the metals in the examined samples ranged from 1.7 to 10 with significant contributions from Cd, Ni and Co.

Barley, as animal feed, raw material for malting and human food, constitute an important part among cereal sources in the world. Majority of barley that produced both in Turkey and other countries of the world, is being used as animal feed. Poor baking quality, taste and appearance of barley restricted its use in human nutrition. However, recently high protein, fiber, especially β-glucan and high starch content appeal to food industry. Many scientific researches established that β-glucan, a soluble fiber, has an effect in healing coronary-hearth diseases, lowering blood cholesterol level, balancing blood sugar level, preventing obesity. Being a healthy cereal that can be used in various purposes, and an additive in many food products, barley is considered a very promising cereal, and research to increase possibilities of its use in human nutrition is being increased. In the literature, there has been researches on making noodles, bulgur, kavut (roasted cereal), breakfast cereals. In this study the researches relating to evaluation of barley, importance of which is increased every day, as human food was reviewed.

Requirement simple technology, low production costs, lack of polluting effects and reliability in terms of health of it is the most important advantages of edible films. Chitosan that extend the shelf life of food and increase the economic efficiency of packaging materials is one of the new materials used for edible films. Chitosan was obtained by deacetylation of chitin which is the most commonly occurred polymer after cellulose in nature, in shells of arthropods such as crab, shrimp, lobster and in cell walls of some bacteria and fungi. Chitosan has the important bioactive properties such as hemostatic, bacteriostatic, fungistatic, spermicidal, anticarcinogenic, anticholesteremic, antacids, antiulcer, wound and bone healing accelerator and stimulating the immune system. As well as these features, the film forming and barrier properties of its, chitosan is made the ideal material for edible films and coatings in antimicrobial characters. Especially, in the protection of qualities and the improving storage times of fruits and vegetables, have been revealed the potential use of chitosan. The coating food with chitosan films reduces the oxygen partial pressure in the package, maintains temperature with moisture transfer between food and its environment, declines dehydration, delays enzymatic browning in fruits and controls respiration. In addition to, chitosan are also used on issues such as the increasing the natural flavour, setting texture, increasing of the emulsifying effect, stabilization of color and deacidification.

This study was conducted to determine the effect of cottonseed meal (CSM) incorporated into laying rations in place of soybean meal (SBM) at different ratios on yield traits. The birds began to lay at 6th week, 180 female and 45 male quails were used in laying period experiment. Birds were fed with rations containing 20% CP and 3000 Kcal/kg ME up to 20-week age (Laying period). CSM as a substitute, five different rations of the protein content (0, 30, 58, 86 and 100%) for SBM to basal diets based on corn-soybean meal were used. The results showed that there were no differences in terms of egg yield traits, cumulative feed consumptions and viabilities during the laying period. The highest dry shell rate and shell thickness were obtained from 5th group and 1st group, respectively. As a result, adding CSM instead of SBM in laying period were no significantly differences in terms of egg production and egg quality in laying period.

This study contains the yield evaluations on oilseed crops cultivation in TR71 region, which contains Niğde Kırşehir, Aksaray, Niğde and Nevşehir provinces and is also known as Ahiler Development Agency. Effects of climate change on oilseed crops based on climate projections of the next 30 years was have been analyzed. Changes in surface temperature values and precipitation amounts for the period of 2011-2041 have been evaluated seasonally and annually with the corresponding values of 1961-1990(RF). Based on the RegCM3-ECHAM5-A2 scenario, the average temperature is expected to increase 0.2-0.6 Co until 2041. The smallest temperature change is predicted to occur in spring season where the greatest temperature change (0,6-0,8C°) is expected to occur in summerand autumn season. The changes in total annual precipitation amounts had generally increase tendency (5-25%) over the region especially in winter season30% increase rate was expected over Kırşehir, Aksaray and South part of Kırıkkale province. The changes in total autumn season precipitation amount is predicted to increase (20%) over Niğde but decrease (5%) over the south part of Kırıkkale and southwest part of Kırşehir and Aksaray province in autumn season. Considering the effects of the climate change in the next 30 years, agricultural production in TR71 region is in quite a good place compared to other part of Turkey but this change will indeed affect the agricultural potential of the region substantially. Annual temperature elevation will aggravate the plant temperature stress where increased evaporation will negatively impact the yield, increasing the pressure on the limited irrigation potential. Especially elevated temperature will negatively impact disc development during the seed formation period resulting in yield loss because of the feeble seeds on the disc and the increased disease susceptibility resulting from the cavitation in the inner parts of the disc.

Kurugöl Lake; Sivas province Hafik county Kurugöl village located within the boundaries of Sivas province, 54 km, Hafik the town 24 miles away, an area of 8.9 ha altitude of 1362 m, an average depth of 3.4 - 4 m with gypsum plateau on the bottom of the boiling water along with rainfall and snowmelt with the lake is fed naturally. Kurugöl (Hafik - Sivas) waters of Lake of the physical and chemical properties during the year changes occurring determining water quality characteristics to reveal the pollution levels are determined, living life in terms of the availability of the detection, water pollution and control regulations by the lake water classification and fishing activities, compliance with were identified. The inland lake in Kurugöl (SKKY) according to the classification of water resources in accordance with the parameters measured I-III water quality varies from class.