خيارات البحث
النتائج 111 - 120 من 180
Precision Nitrogen Management in Spring Rice (Oryza sativa L.) using Decision Support Tools in Chitwan, Nepal
2024
Kapil Bhattarai | Krishna Raj Pandey | Santosh Marahatta | Manish Dhakal | Nama Raj Bhusal | Rabin Thapa
The blanket prescription of nitrogen (N) fertilizer often results in irrational fertilization. To address this issue and align the application of nitrogen fertilizers with the crop-specific demand, it is imperative to save nitrogen resources, maximize the uptake and net income, and subside environmental pollution. In this context, a field experiment was carried out in Kumroj, Chitwan, Nepal during 2022 to assess the growth, yield, and profitability of rice production by comparing different precision nitrogen management practices. The study was carried out in a randomized complete block design with seven treatments and three replications. The treatments included decision support tools for nitrogen management such as the Green Seeker (GS), the Soil plant analysis development Development (SPAD) meter, and the Leaf Color Chart (LCC) combined with basal application of nitrogen at 30 kg ha–1 and the Urea briquette Deep Placement (UDP), the Polymer Coated Urea (PCU), and the Recommended Dose of Fertilizers (RDF, 120 kg N ha–1). The growth, yield, yield attributes, and financial data were taken. Precision nitrogen management techniques significantly enhanced rice growth and yield parameters. GS–guided application required the highest nitrogen demand (155 kg ha–1), while SPAD (80 kg ha–1) and UDP (78 kg ha–1) resulted in lower usage. PCU and UDP enhanced plant height, leaf area index, and above–ground dry matter. Higher grain yield (6.64 t ha–1) was attained with LCC, SPAD (6.44 t ha–1), and UDP (6.41 t ha–1) treatments. GS application exhibited the highest straw yield (11.17 t ha–1), while LCC demonstrated the highest benefit–cost ratio (1.96). This study concluded that SPAD and UDP demonstrated the potential to save nitrogen resources, while LCC and UDP were found profitable.
اظهر المزيد [+] اقل [-]Effects of Heat and Drought Stress on Sustainable Agriculture and Future Food Security in Türkiye
2024
Serpil Bas | Dilek Killi
This review investigates the effects of heat and drought stress on future food security of Turkish agriculture. Temperature average is expected to rise to 3.2°C at the end of the current century while annual precipitation will decline more than 10% in the west and south and rise by 20% in the north of Türkiye, implying that climate change will affect ecosystem sustainability. It is therefore crucial to develop strategies to mitigate and adapt to climate change such as adjusting the planting schedule, reduced tillage, fertiliser microdosing, pre-sowing seed treatment, and the application of growth promoting bacteria to improve tolerance to stress by comprehending how plants respond physiologically and biochemically under these stress conditions. Long-term heat stress may hinder photosynthetic electron transport, decreasing the plant's ability to make use of energy for photosynthesis. The immediate response of plants under drought stress involves closing stomatal openings to reduce water loss through stomatal conductance. Combined heat and drought stress have a greater adverse effect on plant development and production than their effects in isolation. Plant phenotyping can play a major role in “climate-proofing” Turkish agriculture through the identification and development of crop varities with improved prouctivity, climate resilience and input requirements. Digital agriculture will also improve the efficiency of Turkish agricultural systems as the adapt to a hotter drier climate. To ensure future food security and the viability of the agro-economic system in Türkiye steps must be taken to make Turkish agriculture more robust in preparation for the impacts of climate change.
اظهر المزيد [+] اقل [-]Effects of Different Sources of Fertilizers on Growth and Yield of Radish (Raphanus sativus L.)
2024
Kabita Bhusal | Asmita Paudel | Bhawana Bhatta | Kaushila Bista | Saroj Sapkota
Radish is a widely cultivated root crop susceptible to chemicals for its growth and development. The experiment was conducted to study the effect of different sources of organic fertilizers on growth and yield parameters in the Tokinashi variety of radish. The experiment was laid out using one factorial completely randomized block design with six treatments replicated four times. Vermicompost, goat manure, chemical fertilizers (NPK), poultry manure, farmyard manure and control were the applied treatments. Various growth and yield parameters of radish were measured and assessed at 15-day intervals. Various growth and yield parameters of radish were measured and assessed at 15-day intervals. Growth parameters were observed at 15, 30, 45, and 60 days after sowing. For yield parameters, destructive samples were taken and observed at 30 DAS and 45 DAS and harvested at 60 DAS. The assessments of plant growth and yield parameters showed that poultry manure (PM) treatments were superior. At the time of harvesting, the treatment comprising poultry manure had considerably greater plant height (30.55 cm), leaf length (29.44cm), leaf breadth (10.78cm), leaf number per plant (9.23), root diameter (10.33cm) and root length (20.16cm) with superior yield per ha (33.59 mt ha-1). Poultry manure significantly enhanced root yield and was positively correlated with all growth parameters. The highest benefit-cost (B: C) ratio was recorded in chemical fertilizer (3.99), which was statistically at par with poultry manure (3.81), suggesting that poultry manure might potentially replace chemical fertilizers for the Tokinashi variety of radish cultivation.
اظهر المزيد [+] اقل [-]Sustainable Energy Practices in Cabbage Production in Niğde Province of Türkiye
2024
Tefide Kizildeniz | Melek Nur Kilit
Examining the inputs to agricultural production and analyzing their energy implications is a crucial method for assessing environmental challenges and promoting sustainability. The agricultural industry utilizes energy in diverse ways, both directly and indirectly, encompassing pesticides, electricity, fertilizers, farm equipment, irrigation systems, fuel, and human labor. This research focused on assessing the agricultural inputs utilized in cabbage cultivation within one of the most cabbage cultivated area in Türkiye, gathering data on these inputs, and identifying the energy efficiency associated with this production process. In the study, information on the overall energy inputs was gathered from numerous white cabbage producers in the Niğde province using the face-to-face survey method, a quantitative research approach. According to the results of the research, the total energy input equivalent in cabbage production was determined as 4407.87 MJ da-1 and the total output value was determined as 6348.60 MJ da-1. The energy productivity was determined as 1.20 and the energy balance as 1940.73 MJ da-1. According to the findings, with 33.4% of diesel oil, 23.81% of fertilizer, and 23.06% of machinery make up the majority of this production's inputs. Also, 89.19% of the total energy inputs in cabbage production determined as non-renewable and 10.79% of them as renewable energy inputs. In conclusion, the inputs are efficiently utilized in cabbage production within the Niğde province of Türkiye.
اظهر المزيد [+] اقل [-]Investigation of Marketing Strategies of Ornamental Plants in Konya Province
2024
Beyza Kapcı | Zeki Bayramoğlu
The aim of this study is to examine the marketing strategies of ornamental plants in Konya province, to determine the target markets that the sector can best serve, and to evaluate all the components that can contribute to the development of the sector on a provincial basis. In this context, the sales and marketing strategies of the companies producing and selling in Konya province were identified, suggestions for improvement were presented and the potential of ornamental plants in the region was determined. It is believed that the study will make an important contribution to the literature in this area. The main body of the research consists of ornamental plant companies selling in Konya province. In order to answer the questions of the study, a face-to-face survey was conducted with 32 operators representing the main mass. Porter’s Diamond model was used to evaluate the competitiveness. As a result of the analysis of the data, it was observed that the competitiveness of the companies is low and they are not looking for alternative markets. The lack of legislation defining the sector, the problem of organisation, the fact that they consider their income to be sufficient and the lack of information at the point of sale are the main obstacles to competitiveness. In fact, the main priority for a company is to gain a competitive position in order to increase profit margins. For this reason, companies need to evaluate the opportunities that may present themselves, develop strategies to add value to customers in the long term, and determine strategies to be close to the market in order to create new markets.
اظهر المزيد [+] اقل [-]Investigation of the Allelopathic Effects of Different Faba Bean (Vicia faba L.) Genotypes Against Various Weeds
2024
Bahadir Şin | Mustafa Yılmaz | Melike Köse | Ömer Ümit Okçu
Many allelopathic crops are cultivated in agricultural fields, and these plants can influence the growth of other plants in the cultivation environment with their phytotoxic compounds. One of these plants is the faba bean. In this study conducted under the ecological conditions of Sakarya/Arifiye, the allelopathic effects of Eresen-87, Salkim, Bilecik, and Sakarya faba bean genotypes on weeds such as Johnson grass (Sorghum halepense L.), curly dock (Rumex crispus L.), purslane (Portulaca oleracea L.), and wild mustard (Sinapis arvensis L.) were investigated. Weed seeds used in the experiment were collected from agricultural fields in the Sakarya province. Extracts from dried plant parts of faba bean genotypes were prepared and applied to petri dishes containing weed seeds at concentrations of 5% and 10%, with four replications. At the end of the research, it was observed that all faba bean genotypes at all application doses caused a decrease in germination rate (%), root length (cm), and shoot length (cm) parameters in the four weed species tested. The best results were determined as Eresen-87 and Bilecik at 10% concentration. When the activities of fresh and dry extracts of faba bean genotypes was compared, it was determined that dry application had a higher allelopathic effect.
اظهر المزيد [+] اقل [-]Estimation of Phenotypic and Genotypic Correlation Analysis in F3 Populations of Bread Wheat Genotypes
2024
Akbar Ali | Mansoor Javed Momand | Muhammad Ali | Saeed Ur Rahman | Salman Abbas
Wheat is one of the most important crops all over the world in terms of yield, production, consumption, cultivation, and adoptability. Wheat genotypes exhibiting different yield associated traits which influence each other in many ways. Therefor genotypic and phenotypic correlations are the breeder’s utmost priority to know about the inter-relationship between two or more traits which may be either directly influencing each other in a positive direction or indirectly swaying each other in a negative direction in breeding programs. To find out phenotypic and genotypic correlations among different productive traits, this study was designed at the research area of The Department of Plant Breeding and Genetics, The University of Agriculture, Peshawar, during 2022-23. The experiment was carried out by using 27 wheat genotypes comprising of nine parents and 18 F3 populations evaluated in RCB design with three replications. Overall the study exhibited that kernel yield plant-1, which is one of the most yield contributing trait, was significantly correlated with thousand-kernel weights, tillers plant-1and biomass yield, along some other yield contributing traits. The parental genotype, Janbaz, and cross combinations Watan × AUP-5008, Pirsabak-2005 × AUP-5008, Saleem-2000 × Janbaz and Watan × Tatara were the most promising genotypes for most of quantitative traits and; hence are recommended to be evaluated in further breeding schemes. Both phenotypic and genotypic correlation study exhibited that kernel yield spike-1 was significant and positively associated with plant height, tillers plant-1, thousand-kernel weight and biomass yield. Based on correlations, yield, and production the parental genotype, Janbaz, and F3 combinations Watan × AUP-5008, Pirsabak-2005 × AUP-5008, Saleem-2000 × Janbaz and Watan × Tatara were the most promising genotypes for most of the quantitative traits, which can be incorporated in further breeding program.
اظهر المزيد [+] اقل [-]The Effects of Rabbit Compost Tea and NPK Fertilizer on the Growth Parameters of Maize (Zea mays L.)
2024
Tolulope Matthew Awopegba | Kehinde Adewole Adeboye | Folasade Florence Samuel
This study evaluates the effects of rabbit compost tea and NPK (15-15-15) fertilizer on the growth parameters of maize (Zea mays L.) at the Teaching and Research Farm of Ekiti State Polytechnic, Isan-Ekiti. The treatments were laid out in a randomized complete block design (RCBD) with three replicates. Each replicate consisted of four (4) treatments. Total land area measured 88 m2 (11 m by 8 m) with 12 plots, and each plot size measured 3 m by 2 m (6 m2) with 1 m alleyways between plots and replicates. The treatments and application rate were the control, rabbit compost tea at 400 l ha-1, a combination of NPK at 100 kg ha-1 and rabbit compost tea at 200 l ha-1, and the application of NPK (15-15-15) fertilizer at the rate of 200 kg ha-1, which was incorporated as the experiment's standard treatment. In the experiment, growth parameters of maize (Zea mays L.) were monitored and evaluated. Findings showed that the application of rabbit compost tea and NPK (15-15-15) fertilizer significantly (p < 0.05) increased the plant height, stem girth, number of leaves, and leaf area when compared with the control, especially when combined. According to this study, rabbit compost tea is an effective and sustainable organic amendment that smallholder maize farmers should consider using to improve growth and output.
اظهر المزيد [+] اقل [-]Histological Fixation Process and Fixatives
2024
Tuğba Dağdeviren | Hatice Kübra Yolcu | Bülent Ünver
Tissue monitoring generally includes the stages of fixation, dehydration, clearing, hardening (infiltration), paraffin blocking/paraffin(emmeding), sectioning, water removal, routine staining, and mounting. Fixation is the basic and first step in the microscopic examination of tissues. The histotechnical process, which includes components such as detection, tissue tracking and staining, basically aims to capture and visualize the state of the relationships between tissue parts inside and outside the cell and various cells at a certain time as close as possible to the living state. Maintaining the natural structure of the tissue is important for the follow-up phase. The main feature of a good fixative should protect the sample and make the macromolecules insoluble without changing the chemistry of the sample studied and allowing it to be examined as closely as possible to its living state. In histological tissue analysis including light microscope and electron microscope techniques, an appropriate fixation method is selected for each study. Detection solutions are classified in terms of content. The most commonly used fixative in light microscopic follow-up procedures is 10% formaldehyde. For the electron microscope, the gluteraldehyde-osmium tetraoxide binary is widely used for fixation purposes. Gluteraldehyde acts more slowly and is more expensive than formaldehyde. Formalin is obtained by dissolving formaldehyde in water. In addition, the fixed samples can be stored in the solution for months. With a successful fixation process, the structural properties of the tissue are preserved and thus it is possible to examine the tissue as closely as possible. Thus, better quality sections are obtained from the tissue samples taken. For this reason, it will be more efficient to interpret well-fixed samples by photographing them. In this review, which was created by using various sources, the elements to be considered for an ideal fixation were determined and it was aimed to provide an overview of successful fixation for light microscope and electron microscope.
اظهر المزيد [+] اقل [-]Antifungal and Antioxidant Properties of Some Artificial Antioxidants, Generally Recognized as Safe Compounds and Nano-Oxides
2024
Ayşenur Gürgen | Sibel Yıldız
In this study, the usage potential of some artificial antioxidants, generally recognized as safe (GRAS) compounds and nano-oxides solutions in wood preservation industry, was investigated. For this purpose, antifungal and antioxidant properties of solutions were determined. Erythorbic acid, ethoxyquin, potassium disulfide, sodium ascorbate, sodium erythorbate and Enginerring and Nature Sciences Faculty (TBHQ) were selected as artificial antioxidants; dehydroacetic acid, sorbic acid and sodium benzoate were used as GRAS compounds and nano MgO, nano CeO, nano ZnO, nano SiO2 and TiO2 were investigated as nano-oxides in this study. Three different concentrations (0.5%, 1.0% and 1.5% ) were prepared, and anti-fungal test were carried out. The brown rot fungus Coniophora puteana (Schumach.) P. Karst. (BAM Ebw. 15) was used for the anti-fungal test. Then antioxidant activity of the solutions were determined. Iron (III) ion reducing antioxidant power method (FRAP) was used to determine the antioxidant activity of solutions. All solutions at 1.5% concentration completely inhibited the growth of C. puteana fungus. The antioxidant activity of solutions was sorted as artificial antioxidants>GRAS compounds>nano-oxides, respectively. It was concluded that the tested substances can be used as impregnating agents in wood preservation.
اظهر المزيد [+] اقل [-]