The main objective of this study is to determine the factors affecting the application of innovations for dairy farmers in the Milas district, Muğla province, Turkey. Data from 71 dairy farmers and the Multinominal logit model are used for this study. The dependent variable of the model is divided into three categories; “I don’t apply any agricultural innovations”, “I apply agricultural innovations only after other farmers apply and express their positive opinion” and “I apply agricultural innovations”. In conclusion of the analysis, the comparisons are done with the farmers who “do not apply any agricultural innovations,” and the farmers who “apply agricultural innovations only after other farmers apply and express their positive opinion”; it is determined that a one unit increase in educational level raised the likelihood of applying innovations after receiving positive opinion. When the farmers that “apply agricultural innovation”, and that “apply agricultural innovations only after other farmers apply and express their positive opinion” are compared, it is found that a one unit increase in the number of milking animals had increased the likelihood of applying the innovations.

Tomato is one of the most important vegetable crop which is widely grown in the world. Economic yield loses due to several insect species has been reported on tomato production. In recent years, a new pest Lasioptera sp, which causes significant damage in tomato production area has emerged. The pest has first been reported in tomato production areas of Mersin district in 2012 after it has been reported in Greece. This pest belongs to the family Cecidomyiidae and is causing damage in the stems and on the fruits of tomato. The larva feeds inside of the stem, so this makes management of the pest difficult. There are no adequate studies on integrated pest management on this pest. This report clearly showed that detailed studies on the biology and management of this pest in the tomato production should be done.

The rheological properties of koumiss were investigated at different temperatures (4, 10, and 20°C). Experimental shear stress–shear rate data were fitted to different rheological models. The consistency of koumiss was predicted by using the power-law model since it described the consistency of koumiss best with highest regression coefficient and lowest errors (root mean square error and chi-square). Koumiss exhibited shear thinning behavior (n

This study was conducted to investigate the NaCl impacts on germination and emergence performance of common vetch varieties. Seeds of Gülhan, Selçuk, Kubilay, Emir and Nitra were used as materials. Electrical conductivity (EC) values of NaCl solutions were 5, 10, 15 and 20 dS m-1. Distilled water (0 dS m-1) used as control. In this study germination and emergence test were applied to the varieties. In germination and emergence test mean germination time, mean emergence time, germination percentage, emergence percentage shoot length, root length, shoot fresh and dry weight were measured at the end of the 14th day after sowing. The results showed that germination and emergence percentage and the seedling growth of the varieties were inhibited by NaCl stress and NaCl stress led to increase in germination time and emergence time. Cultivars Gülhan and Emir were the least affected compared to other cultivars. Moreover increased NaCl levels gave rise to increase in Na+ content of cultivars and it was evaluated that the significant correlation (r=-0,525) between Na+ and K+. It was also determined that the correlation between two characters had negative relationship.

This study was conducted to determine the better hygienic behaviour determination method that is used in controlling against bee diseases and pests. Total forty honeybee colonies (Apis mellifera anatoliaca) were used and they were randomly divided into two groups (each group consists of twenty colonies) in first year. Liquid nitrogen method was used in the first group' colonies and pin-killing (needling process) method was used in the second group’ colonies to determine the effectiveness of methods for hygienic behaviour. Average clearance rate was found as 66.25% and 78.10% in the first (Liquid nitrogen application) and the second (pin-killing) groups respectively. In the second year, forty colonies were divided into five equal groups and each group consisted eight colonies. The first group consisted of 9 frames bees in standard langstroot hive (10 frame capacity), the second group consisted of 5 frames bees in standard langstroot hive (10 frame capacity), the third group consisted of 5 frames bees in ruşet hive (5 frame capacity), the forth group’s consisted of 3 frames bees in ruşet hive (5 frame capacity) and the fifty group consisted of queen mating hive. The pin-killing (needling process) method, tested in first year, was used for all groups to determine the effectiveness of colony population and the size of hive. Average clearance rates of the first, second, third, forth and fifth groups were 70.54%, 58.38%, 70.63%, 54.96% and 58.21% respectively. The colonies that belonged to the pin-killing (needling) group showed a higher cleaning behaviour rate than the other colonies. The density of bees in hive had an important effect on the clearance rate of colonies. The colonies of group 1 and group 3, which had the more density of bees in per unit area, had the higher clearance rate than the other groups.

This study was aimed to examine the cotton production techniques and determined of input use in the cotton production. The primary data used in research was obtained from 94 cotton-growing farms by surveying method in the Antalya province. The data belonged to 2011 production period. In the research area 95.74% of agricultural farms made conventional farming. It was determined that cotton seed was used 2.43 kg per decares and 27.7% of farmers had soil analysis and 24.5% of them applied fertilizer according to the analyses. It was determined that the average fertilizer applications per decares were 24.9 kg nitrogen, 17.2 kg phosphorus, 8.2 kg potassium and 0.5 kg sulfur fertilizer. It was calculated that the average number of plant spraying 5.4, the number of irrigation 4.53 in the cotton cultivation. The application level of water-saving irrigation techniques of farmers was low(2.12% of farmers used drip and sprinkler irrigation system). Labor force was used as 53.95 hours and machine was calculated as 3.06 hours per decares. Mechanization of the cotton harvest increased. It was determined that 47.87% of farmers did not receive consultancy services; 22.34% of farmers were knowledgeable about the concept of integrated pest management and 41.5% of farmers were knowledgeable about good agricultural practices in the region. In order to increase the production of cotton in the region; new varieties which will be compatible to the region, higher levels of yield, resistant to disease and pests should be developed and farmers should be informed about technical applications by extension personnel.

Yogurt powder was produced by freeze drying and with added candied chestnut puree at ratios of 5, 10, and 20 % by weight. Moisture sorption isotherms of yogurt powder samples, plain (YP), and containing 5, 10, 20% candied chestnut puree (CCP) were determined at 25°C using the standard, static-gravimetric method. The experimental adsorption data of yogurt powders at 25°C were fitted to 14 sorption equations which are most widely used to fit experimental sorption data of various food materials. The parameters of the sorption models were estimated from the experimental results by using the nonlinear regression analysis. The GAB model gave the closet fit to the sorption data of freeze dried yogurt powders with candied chestnut puree at 25°C. BET, Ferro Fanton, Henderson, Halsey, Oswin and Modified Oswin models are also acceptable for describing the adsorption isotherms for freeze dried yogurt with candied chestnut puree at 25°C.

Genetic variation is prerequisite for plant breeding. Nothing information existed in the literature for available diversity of Coriander accession in Turkey. Plant breeding activities are negligible in Turkey. So in order to start effective plant breeding program in Turkey, information on the available genetic diversity is viable. Therefore we planned to study the genetic variation and population structure of 29 Coriander accessions by seed storage protein (SDS). SDS analysis elaborated the lack of population structure and genetic bottleneck in the Coriander accessions in Turkey. Based on the results of this study, it was clear that sampling strategy was not appropriate and plant introduction should be made from different sources and diverse genotypes should be used as parents to initialize the effective Turkish Coriander breeding program.

Forty seed sample of wheat (Triticum aestivum) were collected from four locations viz. Chitwan, Kaski, Banke and Lalitpur and tested by blotter method at laboratory during 2013 for determining fungal pathogens associated with wheat seeds in Nepal. Eighteen species representing thirteen genera of fungi were recovered from the seed. Alternaria alternata and Bipolaris sorokiniana were predominant in all the varieties/genotypes from all the locations, where B. sorokiniana was strongly pathogenic in wheat crop. Percentage frequency and type of fungi detected varied with variety and locations. Bipolaris sorokiniana was highest (64.40%) in Banke than remaining three locations. Seeds of Chitwan had lowest percentage (5.50%) of seed infection as compared to other locations. Relative abundance of Alternaria alternata (55.10%) was highest as it was the most prevalent component of seed borne mycoflora, followed by Bipolaris sorokiniana (34.69%) and Cladosporium herbarum (7.19%). Differences in quantity of precipitation and relative humidity might be the possible reason for variation in frequency and type of fungi detected in wheat seeds of four locations.

The aim of this study is to evaluate the quality characteristics of physical, chemical and microbiological of some fruit nectar samples produced from some local and imported companies and sold in the city of Tripoli, and to determine their conformity with Libyan specification standards. In this study, 40 samples of different fruit nectars (grape, pineapple, guava, orange, apple, and mixed fruits) were collected from different local supermarket, five imported companies and 4 domestic which were available at the time of study. The Samples were classified based on their type of fruit nectars and also marked as (A, B, C, D) and (E, F, L, M, N) for different domestic or imported and imported companies respectively. The results showed that all the samples were free from artificial colours added. Local and imported samples were conform with the Libyan specification standards (990-2014) for fruit nectars. Five local and four imported samples were unconfirmed with the standards. In terms of acidity, some local and imported samples were conform to the Libyan specification standards, except one local sample and 5 imported samples. However, 35.3% of local samples and 43.5% of the imported samples unconfirmed to the Libyan standard specifications. Microbiological results showed that all local and imported samples were free from total bacterial count, yeasts and molds and coliform bacteria. Heavy metals (cadmium, lead, arsenic, copper, zinc, iron) of local and imported samples were conform to the Libyan specification standard, except 3 samples of imported products were had higher arsenic concentration. Based on the results of this study which indicated the importance of quality control programs for such products not only during production but also during storage and sales due to possibility of contamination and spoilage.