Yam peel (YP), cassava peel (CP), cocoyam peel (CoP) and plantain peel (PP) are common food wastes of the Niger Delta region. Anaerobic digestion (AD) of these wastes with water hyacinth (WH) presents a viable way of both providing renewable energy and cleaning up the environment. AD tests were carried out on the food wastes and WH to determine their biogas potentials. The experiments were carried out under mesophilic conditions at (37 ± 1 °C) over a period of 20 days and the tests were replicated to give an indication of repeatability. The results showed that YP+WH, CP+WH, CoP+WH and PP+WH had specific biogas yields of 0.42, 0.29, 0.39 and 0.38 m³/kg volatile solid (VS), respectively. The yields represented 76, 48, 70 and 69% of their respective theoretical values. Co-digesting the food wastes with WH in a VS ratio of 2:1 reduced the biogas yields of YP, CP, CoP and PP by 16, 22, 7 and 7%, respectively. The drop in gas production was due to indigestible complex molecules in the WH co-substrate. The results indicate that common food wastes in the Niger Delta can be used as feedstock for AD, but co-digesting with WH reduces the biogas yield.

A novel composite foam was prepared from native cassava starch and water hyacinth (WH) by baking in a hot mold. The effects of WH powder content (0, 3, 5, 7 or 10 wt%, dry starch basis) on the properties of the starch foam were investigated. A starch foam formulation with 5 wt% WH powder exhibited the highest flexural stress at maximum load (3.42 MPa), the highest flexural strain (extension) at maximum load (3.52%), the highest modulus (232.00 MPa), the lowest moisture content (6.77%) and the most uniform cell size distribution (0.44 ± 0.09 mm). Moreover, mechanical properties of starch foam with 5 wt% WH powder were better than the same properties of some commercial foams. After being coated with beeswax, the starch foams retained their shape after immersion in distilled water and their water solubility was significantly reduced. Results indicated that a starch foam/5 wt% WH composite with beeswax coating was a biodegradable foam that could possibly replace commercial non-degradable foam.

The present study is a comparative evaluation of anaerobic co-digestion of water hyacinth and food waste with and without pretreatment. The novelty of this anaerobic co-digestion study is that it highlights the effect of pretreatment and mixing ratio. Two set up of bio-chemical methane potential (BMP) experiments for the same mixing ratios but with or without pretreatment were simultaneously conducted. In set I, untreated water hyacinth and food waste was co-digested whereas in set II, pretreated water hyacinth and food waste was co-digested. Higher biogas production in set I and II was witnessed by the mixing ratios 2 and 1.5 respectively indicating them to be the ideal mixing ratio. Considerably higher biogas production was observed for both the setup of anaerobic co-digestion than mono-digestion. Also, set II exhibited higher biogas production than set I. The results portrayed that pretreatment followed by co-digestion provided quicker and higher biogas production.

In Kenya, 57% of the municipal solid waste generated is Food waste (FW) which has high organic content. However, the treatment and bioconversion of FW to biogas have always been challenging due to its rapid biodegradation, resulting from rapid hydrolysis and accumulation of volatile fatty acids and lowering pH in the bioreactor. In this study, the anaerobic digestibility of FW as a mono substrate was compared to co-digestion of FW with water hyacinth (WH) for improved biogas production and organic matter removal efficiency in a laboratory batch reactor. Different mix proportions of FW and WH were co-digested under mesophilic conditions (37 °C) at a dilution of 6% (w/v) Total Solids (TS) content. The TS of the substrates (Food waste and Water Hyacinth) were pre-processed to have a concentration of TS at 6% (60 g/L) to operate a wet AD which requires the substrate to be less than 15% TS. The proportions of WH: FW (v/v) were 100:0, 85:15, 70:30, 55:45, 30:70, 15:85, and 0:100. In the batch rectors the anaerobic co-digestion was conducted with Substrate to Inoculum (S/I) ratio of 1:1. FW is generally considered to have high volatile solids which hydrolyze rapidly lowering pH arising from excess production of Hydrogen which in presence of CO₂ and acetogenic bacteria leads to more production of acetate, formate and other long chain fatty acids which inhibits methanogenesis as a result of rapid acidification. The rapid acidification of the bioreactors that are used to treat FW results in the inhibition of the methanogenesis process. The co-digestion of the substrates could have improved the process parameters by reducing acidity caused by the high C/N ratio, reducing the inhibitory range, and increasing the buffer capacity which enhanced the bio-methane potential and the microbial activity. The batch experiments were set in triplicate for both cases of FW, WH, mixtures, and Inoculum. The results showed that the average gas yields after 81 days for the various mix proportions were 256.27and 357.69 ml/g-VS for mono-digestion of WH and FW respectively. For the mixtures of WH: FW the average reported biogas production were 305.01, 280.27, 548.91,616.01 and 270.87 ml/g-VS for mixtures of 15:85, 30:70, 55:45,70:30 and 85:15 respectively. The modified Gompertz model showed that the digesters with WH and FW alone had lag times of 2.599 and 1.052 days respectively. The mix substrates of WH: FW 85:15, 70:30, 55:45, 30:70 and 15:85 shown lag times of 2.456, 3.777, 2.574, 1.956 and 1.75 days respectively. A mix (WH: FW) of 70:30 had the highest maximum specific biogas production Rmax and the maximum biogas production potential of 18.19 mlCH₄/gVS per day and 607.7mlCH₄/gVS respectively. The R² and RSME values ranged from 0.9867 to 0.9963 and 2.663 to 9.359 respectively in all the digesters. The study shows that the co-digestion of WH and FW in the mix ratio of 70:30 improved the volume of biogas produced and organic matter removal efficiency reached 79%.