The objective of the current study was to create a frozen dessert with reduced fat and sugar content, using plant-based ingredients and to evaluate its physical, rheological and nutritional properties. The dessert formulations were developed using plant-based ingredients such as sweet potatoes, potatoes, carrots, and beetroot, combined with date sugar, corn starch and skimmed milk powder. Chemical analysis showed that the sweet potato (SP) sample had the highest energy value due to its carbohydrate and fat content, while the carrot (CR) sample had the lowest. Rheology tests revealed that beetroot-based (BR) samples exhibited the highest viscosity, likely due to the high dietary fibre content in beetroots, while the CR sample was the most fluid, attributed to its lower solids content. The study showed that air bubble size influenced texture and melt behaviour. The overrun, a measure of air incorporation, was highest in the BR sample, contributing to a lighter texture. The hardness of the desserts was influenced by solid content and ingredient composition, with the CR sample being the hardest. Melting rate analysis revealed that all samples melted slowly, with the SP, SPP (sweet potato + potato), and BR samples melting uniformly over time. Overall, the study demonstrated that plant-based ingredients could effectively replace traditional high-fat animal-based ingredients, yielding frozen desserts with favourable nutritional profiles, acceptable rheological properties, and desirable physical characteristics.

There is an increasing demand for natural and healthy food products that play a multifunctional role in human diet. Pine cone syrup has long been known and used for its medicinal purposes. As part of the research, a syrup was developed from green pine cones, which can be used not only in cases of colds, but also in everyday life. The aim of the research was to evaluate different pine cone syrups produced by brown and white sugar and analyse their physical parameter changes during storage. Syrups were characterised by volatile compounds and their changes depending on the type of sugar used. The content of soluble solids, pH, viscosity and titratable acid during storage were analysed as well. A total of 33 volatile compounds were detected in syrup made with white sugar (SWS) and 36 in syrup with brown sugar (SBS). Of the compounds detected, sample SWS was characterised more by compounds giving a pine and resinous aroma, while sample SBS was characterised by a pine and citrus aroma. The determination of the soluble solids content of syrups, irrespective of the type of sugar chosen, using the t test analysis there is no significant differences (p>0.05). The average soluble solids of 63.2 ± 0.6 °Bx for sample SBS and 62.7 ± 0.6 °Bx for sample SWS, complies with the legislation on soluble solids content of syrups (62 °Bx). No significant difference was found between sample pH, which for both samples was 3.5. Sample SBS on average had a higher viscosity (0.102 ± 0.001 Pa·s) than sample SWS (0.09 ± 0.001 Pa·s) and it was noticed that the sample became more viscous during storage.

Durum wheat (Triticum turgidum) is used for the production of various ready-to-eat products such as breakfast cereals, puffed grains, and extruded products. Technological processes of grain processing and the addition of different ingredients cause changes in the physical and chemical properties of the product, which give puffed grains a unique porous structure and change their nutritional value. This study aimed to evaluate the effect of coating on the physico-chemical characteristics of puffed wheat grains depending on the coating material. The study revealed that the application of coating increased dry matter and thousand-kernel weight (TKW). Water activity decreased in puffed grain without coating (BZ), and puffed grain with whey powder (MC) compared to wheat grain. The reduction in the moisture content increased the crispiness of product. Application of coating led to a decrease in the hardness of both MC and puffed wheat grain with vanillin and sugar (BV). Applying additives to the product’s surface led to a decrease in the water absorption index (WAI). The water solubility index (WSI) increased in the MC and BV samples. Samples BZ, BV and MC had higher L* (lightness) values than wheat grains because the puffing process expanded the cells, confirmed by scanning electron microscopy, and caused starch gelatinisation. The a* (redness) value of wheat was greater than that of BZ, BV and MC, which may be due to the partial removal of the outer layer of wheat grains. The milled samples of BZ, BV and MC were slightly darker, having lower L* values, compared to unprocessed wheat grain.

Glycerol is a versatile substance used in food, beverages, cosmetics, and technical applications. It can be derived from fats and oils through 4 different reactions, including: transesterification, directed hydrogenation, hydrolysis, and saponification. Glycerol derived from fat hydrolysis yields superior quality and quantity when compared to saponification. The resulting glycerol water is purified and concentrated through evaporation to yield crude glycerol with a concentration of 86–88%. Two distinct methods are recognized for further improving quality of glycerol: distillation, and the purification of glycerol water through the ion exchange process followed by evaporation. The goal of this research was to improve the purification process of glycerol, for obtaining premium-quality glycerol without the need for distillation, through the utilization of cations. Several combinations of activated carbon and clay were tested, and it was determined that a combination of 70:30 yielded the optimal results, considering the amount of glycerol and ash content. Technological parameters such as reaction durations, pH, and process temperatures were investigated, and it was discovered that the appropriate combination was a process duration of more than 40 minutes, a pH value of 2, and a temperature of 70 °C. Besides, it was also determined that the concentration and quality of glycerol derived from cottonseed oil can be enhanced through distillation or purification with cationite. Moreover, different concentrations of glycerol on the elaboration of gingerbread were tested, and the conclusion is that adding 5% of the resulting glycerol to the gingerbread recipe could ensure better preservation of its quality during its shelf life.

Fresh-cut herbs satisfy consumer demand owing to the convenience of buying them in food shopping malls as quickly accessible products. Food packaging has an important role in the food industry nowadays, because it helps to preserve the quality of fresh-cut food products at the production and sales sites and provides safety during storage. The aim of this research was to evaluate the quality changes of fresh-cut rosemary packed and stored in biodegradable film packaging. Rosemary has been packed in several materials – two biodegradable packaging materials, NatureFlexTM NVS INNOVIA film, Nature Works® PLA P-360 containers with hermetically pressed PLA cap and “breathable” conventional BOPP PropafilmTM P2GAF film. The samples were analysed over time at 0, 3, 5, 8, 10 and 12 days of storage at a temperature of +5 ±1 °C in terms of physicochemical quality: O2 and CO2 concentration, mass loss, pH, content of soluble solids (ºBrix) and tested sensory evaluation. The analysis of the obtained results showed that the cellulose based biodegradable NatureFlexTM NVS INNOVIA film was a good way to prolong the storage time of fresh-cut rosemary and ensuresensory quality and high physiochemical quality during the preservation period.