خيارات البحث
النتائج 11 - 20 من 22
Prevalent Parasitosis in Beef and Dairy Cattle Farms in Vidzeme Region
2016
Keidāne, Dace | Krūklīte, Anna | Derbakova, Alīna
The aim of the study was to investigate the beef and dairy cow parasitosis epizootic situation in Vidzeme region. Research was done throughout Vidzeme territory during the period of the years 2013-2014. The total number of animals examined was: 273 dairy and 90 young beef cattle aged from 6 months to two years and 248 dairy and 29 beef cows older than two years. For the diagnosis of helminthes standardized ovoscopic and larvoscopic methods were used. For the diagnosis of protozoa flotation and modified Ziehl-Neelsen methods were used. The main species in the samples were Cryptosporidium spp., Eimeria spp. and Strongylus spp. In the young dairy and beef cattle aged from 6 months to two years and cattle older than two years Cryptosporidium spp. invasion accordingly was 32.6% and 19% (dairy cattle) and 62.2% and 65.5% (beef cattle); the invasion of Eimeria spp. 30% and 7.3% (dairy cattle) and 55.6% and 10.3% (beef cattle); and the invasion of Strongylus spp. was 17.6% and 13.7% (dairy cattle) and 43.3% and 27.6% (beef cattle). Both dairy and beef cattle were infected with Moniezia spp., Paramphistomum spp., Strongyloides spp. Dairy cows aged from 6 months to two years had Trichuris spp., Dictyocaulus spp. and Neoscaris spp. invasion.
اظهر المزيد [+] اقل [-]Fungi Causing Storage Rot of Apple Fruit in Integrated Pest Management System and their Sensitivity to Fungicides
2016
Grantina-Ievina, Lelde
Apple fruit rot can be caused by several fungi. In Northern Europe, the most common storage rot, Bull’s eye rot, is caused by Neofabraea spp., bitter rot by Colletotrichum spp., brown rot by Monilinia fructigena, grey mould is caused by Botrytis cinerea and Fusarium rot by several Fusarium species. Blue mold decay caused by Penicillium expansum is an important disease in several European countries. Incidence of different causal agents may vary depending on cultivar, climate during growing season and agricultural practices. The main objective of the study was to obtain baseline information about apple rot-causing fungi, their incidence during fruit storage and to evaluate the fungicide sensitivity of most of isolated fungal species. The study was performed during the storage period of apples after the growth season of 2013. Rotten apples were sorted in the storage and part of them was brought to the laboratory in order to obtain fungal isolates. Fungi were identified according to the morphological characteristics and sequencing of the ITS1-5.8S-ITS2 region. During storage in February and March the total percentage of rotten apples in various cultivars varied from 3.6 to 58.9%. All post-harvest diseases described in Northern Europe were detected. In part of the storehouses apple rot caused by Cadophora luteo-olivacea was observed. Alternaria spp. and Cladosporium spp. were detected on few apples as secondary infection agents. Using the most often isolated fungal species, sensitivity tests were performed against five commonly used fungicides. In general, the sensitivity of tested fungi to the fungicides was high with exception of several Neofabraea and Alternaria isolates.
اظهر المزيد [+] اقل [-]Fault Diagnosis of Low-Power Three-Phase Induction Motor
2016
Gedzurs, Aleksejs
An Induction motor reliability survey at an egg processing plant shows that almost 50% of the total motor failures are fan induction motors. Visual investigations of the faulty fan motors show that the main cause of the induction motor failure is air gap eccentricity. In this study, experimental tests are performed on a 1.1kW three-phase induction motor to detect air gap eccentricity and overheating of the induction motor. Heating tests show that end shield housing temperature reaches 100°C with blocked air flow from the fan, which can reduce the lifespan of the bearing. Dimension measurements of the end shield housing show that the dimensions of both tested motors back-end shields are larger than ISO tolerance grade limit. It leads to a loose fit between the housing and bearing, causing air gap eccentricity. Also, both motor back end shield housing has an out-of-round condition leading to an unbalanced magnetic pull. To detect the air gap eccentricity caused by too loose of a fit between housing bore and bearing, current Park’s vector approach is used. To measure three phase current, Hall Effect current transducers, a digital oscilloscope is used and Matlab software to process the measurement data. Results show that Park’s vector approach can be used to detect the air gap eccentricity caused by too loose a fit between bearing and housing. Therefore, the Park’s vector approach can be used to diagnose air gap eccentricity and analyse the type of the air gap eccentricity.
اظهر المزيد [+] اقل [-]Analysis of the non Isothermal Distributed Activation Energy Model for Biomass Pyrolysis by Fuzzy Gaussian Distribution
2016
Dhaundiyal, Alok | Singh, Suraj B.
The main aim of this paper is to fuzzify the kinetic parameters, which have crisp nature, in order to obtain the realistic and accurate results. In the present study, the variance, upper limit of ‘dE’ and the frequency factor are assumed to be fuzzy numbers. The Gaussian distribution is considered as the distribution function, f (E), of Distributed Activation Energy Model (DAEM). The membership and the non-membership functions are evaluated by the trapezoidal fuzzy number. Thermo-analytical data has been found experimentally with the help of TGA/DTG analysis. The approximated solution of DAEM is obtained with the help of asymptotic expansion.
اظهر المزيد [+] اقل [-]The characteristics of extruded faba beans (Vicia faba L.)
2016
Strauta, L., Latvia Univ. of Agriculture, Jelgava (Latvia). Faculty of Food Technology | Muizniece-Brasava, S., Latvia Univ. of Agriculture, Jelgava (Latvia). Faculty of Food Technology
Faba beans (Vicia faba L.) are an excellent protein source and should be more present in human diet, but due to their long cooking time, they are rarely used. So, in order to increase the accessibility of faba beans (Vicia faba L.), experiments were carried out to obtain new food products. Extrusion-cooking was chosen as the potential thermal cooking process and two different products were obtained. One was made exclusively from faba bean (Vicia faba L.) flour, while the second one was produced with a 50% addition of wheat flour to bean flour. Protein content, size, volume mass, pH and starch content for obtained products were analysed in order to characterise the products, as well as to see the differences from non-extruded faba beans (Vicia faba L.) and obtained samples. The experiments were carried out using faba beans (Vicia faba L.) obtained at Ltd. “Pure Horticultural Research Centre”. They were milled at Ltd. “Grauda spēks” and extruded with a twin screw extruder at Ltd. “Milzu”. The experiments showed that the extrusion process had decreased the protein content by 9%, but the starch content had risen by 13% with the addition of wheat flour. But, for sample, without added wheat flour differences were not significant. No significant size differences were observed in the obtained samples and pH values had no significant differences between extruded samples.
اظهر المزيد [+] اقل [-]10. Baltic-Nordic Agrometrics Conference: Mathematics and Statistics for the Sustainable Development
2016
Vintere, A., Latvia Univ. of Agriculture, Jelgava (Latvia). Dept. of Mathematics
X Baltic-Nordic Agrometrics conference “Mathematics and Statistics Society for Sustainable Development” was held from 15 to 17 September at the Latvian University of Agriculture (LLU) in the framework of the Nordplus Higher Education 2016 project NPHE-2016/10342 “Raising awareness about the role of math skills in building specialists’ competence for the sustainable development of society”. Agrometrics is mathematics and statistics in agricultural science and studies. The aim of the X Baltic-Nordic Agrometrics conference was to exchange ideas, find out new solutions or highlight topical problems on the mathematics, statistics, informatics and physics education tendencies, practical application and research in the context of sustainable development.
اظهر المزيد [+] اقل [-]Mathematics admission test remarks
2016
Ideon, E., Estonian Univ. of Life Sciences, Tartu (Estonia). Inst. of Technology | Aruvee, E., Estonian Univ. of Life Sciences, Tartu (Estonia). Inst. of Technology
Since 2014, there have been admission tests in mathematics for applicants to the Estonian University of Life Sciences for Geodesy, Land Management and Real Estate Planning; Civil Engineering; Hydraulic Engineering and Water Pollution Control; Engineering and Technetronics curricula. According to admission criteria, the test must be taken by students who have not passed the specific mathematics course state exam or when the score was less than 20 points. The admission test may also be taken by those who wish to improve their state exam score. In 2016, there were 126 such applicants of whom 63 took the test. In 2015, the numbers were 129 and 89 and in 2014 150 and 47 accordingly. The test was scored on scale of 100. The arithmetic average of the score was 30.6 points in 2016, 29.03 in 2015 and 18.84 in 2014. The test was considered to be passed with 1 point in 2014 and 20 points in 2015 and 2016. We analyzed test results and gave examples of problems which were solved exceptionally well or not at all.
اظهر المزيد [+] اقل [-]Fault diagnosis of low-power three-phase induction motor
2016
Gedzurs, A., Latvia Univ. of Agriculture, Jelgava (Latvia). Faculty of Engineering
An induction motor reliability survey at an egg processing plant shows that almost 50% of the total motor failures are fan induction motors. Visual investigations of the faulty fan motors show that the main cause of the induction motor failure is air gap eccentricity. In this study, experimental tests are performed on a 1.1kW three-phase induction motor to detect air gap eccentricity and overheating of the induction motor. Heating tests show that end shield housing temperature reaches 100°C with blocked air flow from the fan, which can reduce the lifespan of the bearing. Dimension measurements of the end shield housing show that the dimensions of both tested motors back-end shields are larger than ISO tolerance grade limit. It leads to a loose fit between the housing and bearing, causing air gap eccentricity. Also, both motor back end shield housing has an out-of-round condition leading to an unbalanced magnetic pull. To detect the air gap eccentricity caused by too loose of a fit between housing bore and bearing, current Park’s vector approach is used. To measure three phase current, Hall Effect current transducers, a digital oscilloscope is used and Matlab software to process the measurement data. Results show that Park’s vector approach can be used to detect the air gap eccentricity caused by too loose a fit between bearing and housing. Therefore, the Park’s vector approach can be used to diagnose air gap eccentricity and analyse the type of the air gap eccentricity.
اظهر المزيد [+] اقل [-]Application of statistical methods in the analysis of sentence structure
2016
Piaseckiene, K., Siauliai Univ. (Lithuania). Faculty of Technology, Physical and Biomedical Sciences
The goal of this research is to explore sentence structures expressed by parts of speech. Due to a small amount of data, a problem of sparse data has arisen, which was solved by recording the annotated sentences and considering a “framework” of a sentence made up from a verb and a noun, which was conditionally called a code. The code of a sentence is created by changing each word of a sentence by a symbol (letter or number) that encodes one or other property of that word as a constituent of the sentence. Zipf’s law describes sentences, encoded like that, rather well. If we ‘learn’ well to identify and analyze (annotate, translate, etc.) sentences of the simplest structure, we can automatically process quite a large part of text sentences. It is possible to identify at least 17% of sentences consisting of the simplest structure.
اظهر المزيد [+] اقل [-]Common diagnostic test results over the years
2016
Aruvee, E., Estonian Univ. of Life Sciences, Tartu (Estonia). Inst. of Technology
In this article, common test results over the years 2000 – 2016 are analysed. The test questions for new entrants were based on secondary school mathematics. The students took the test in the first lesson of the higher mathematics course. The test results were analysed by years, by tasks and by specialities, and their differences were found. The test results’ dependence on state-exams score was studied and other types of dependence were looked at. It was found that the test score has a strong correlation with a state-exam but with high school mathematics mark and with later higher mathematics course marks has very weak correlation. During these 16 years, the questions that have been the most difficult for students have not changed. The highest test scores were found among students who had chosen the most popular specialities (with the highest competition).
اظهر المزيد [+] اقل [-]