Hydrodynamic characteristics of a full-scale kelp model for aquaculture applications

Hydrodynamic characteristics are needed to optimize the design of kelp aquaculture systems. To support this need, the objective of this study was to resolve both the normal and tangential drag forces acting on a dense aggregate of kelp blades using full-scale physical model tests. The physical model was designed to match the exposed length, individual blade flexural rigidity, the number of blades per unit width, the mass/length of biomass, and the aggregate mass density of kelp cultured at the University of New England experimental aquaculture lease site in Saco Bay, Maine USA. Tow tests were conducted at the United States Naval Academy in a tank with the dimensions of 116m × 7.9m × 4.9 m. The large tank size enabled the use of the full-scale physical model, minimizing dynamic similarity issues. In a series of tests, the model was towed in orientations both aligned and perpendicular to the tow direction. Horizontal and vertical reaction forces were measured for five tow speeds, along with the deflection of the dense kelp aggregate. With these datasets and the wet weight biomass per length of the model, normal and tangential drag forces were calculated. Drag components were processed into corresponding normal and tangential drag-area values. The drag-area representation was chosen since reference areas were ambiguous for both the actual kelp and model. At the higher speeds, the total horizontal drag in the aligned configuration were slightly lower than for the perpendicular orientation. Normal drag-areas as a function of tow speed ranged from 2.36 m²/m to 1.39 m²/m for the aligned case and from 2.49 to 1.88 m²/m for the perpendicular case. Tangential drag-areas as a function of tow speed ranged from 0.264 m²/m to 0.0325 m²/m for the aligned case and from 0.213 to 0.0415 m²/m for the perpendicular case. A transition from a bluff body to a streamlined body occurred as the tow speeds increased. To investigate this transition, horizontal components of the normal and tangential drag forces were reconstructed with the results of the tow tests. The reconstructed forces were obtained using a force balance system of equations with drag-area values for tow speeds less than 0.25 m/s extrapolated from the experimental datasets. For both aligned and perpendicular orientations, the model-aggregate reconfigured at a threshold of 0.25 m/s. We defined the threshold for reconfiguration as the tow speed at which the horizontal component of tangential drag equaled or exceeded the horizontal component of the normal drag. The drag-area results from this study can be incorporated into a dynamic fluid-structure interaction model representing kelp aggregates as a finite element beam prescribed with in-situ values of length, volume, mass density and flexural-rigidity of kelp material.