Water-resisting performances and mechanisms of magnesium phosphate cement mortars comprising with fly-ash and silica fume
2022
Haque, M Aminul | Chen, Bing | Li, Shujin
Design of hydraulic structures using magnesium phosphate cement (MPC) composites is a still challenging issue because of the volume instability of MPC matrices in water environment. In this research, an attempt was taken to progress the water-resistance performance of MPC blended with fly ash (FA) and silica fume (SF). The FA was introduced as one third of magnesia in the mortar specimens, where SF dosages were 5%, 10% and 15% as the substitution of magnesia. Physico-mechanical and microstructural properties of mortar samples were examined considering the air and water curing systems. The analytical results bared that compressive strength (CS) and flexural strength (FS) of specimens composed with MPC + FA+5%SF were observed about 25% higher as compared to control. Both strength properties having the optimized content of SF (i.e. 5%) was reduced close by 3–4% in water system, whereas the pure MPC matrix exhibited around 20% less at 28 d. In addition, mass loss (ML) was found nearby 1.56% at 28 d. Moreover, SEM, EDS and XRD tests were detected that intermediate minerals namely Berlinite, Mullite, Lizardite and Enstatite were formed in the microstructures, and micro-cracks and micro-pores were significantly reduced. Consequently, compact microstructure was obtained that resulted the well water-resistant of proposed MPC mortar. The outcomes of this research might be a potential information for constructing the MPC-based water structures.
Show more [+] Less [-]AGROVOC Keywords
Bibliographic information
This bibliographic record has been provided by National Agricultural Library
