Performance testing of a new drying kiln at a sawmill for airflow and moisture content
2000
Ofori, J. | Sagoe, J. K. | Hellem, S.
The performance of a new drying kiln at a sawmill in Kumasi was determined by carrying out tests on the airflow in the kiln which had been loaded wih lumber, and monitoring the distribution of the final moisture content of the lumber after the termination of the kiln-drying. The contents of the kiln were 16 packages, made up of 13 packages of 25 mm thick Wawa (Triplochiton scleroxylon), one package of mainly 83 and 25 mm thick Celtus (Celtis mildbraedii), and two packages of 25 mm thick Ceiba (Ceiba pentandra) and Chenchen (Antaris africana) boards. The air speed was measured at various locations in the loaded kiln using an anemometer. The moisture content was monitored mainly on the Wawa boards using an electrical resistance-type moisture meter. The air speed varied from 0.1 to 1.7 m/sec, and averaged 1.01 m/sec for the whole charge. The active airflow through the lumber packages was 39,138 m3 /h, and the air leakage from the fans was 23,097m3 /h. The air leakage was moderate, andthe active airflow was not hgh enough. The fan capacity was insufficient to enable uniform final moisture content to be achieved for the drying of the Wawa, a species with high initial moisture content. The final moisture content for the Celtis varied from 12.6 to 25.5 %. Ther were many drying defects in the dried Celtis boards, clearly indicating that it is inadvisable to mix different species and thicknesses in the same kiln load. The average final moisture content of 12.3 % for the Wawa was above the average of 10 % usually found in Wawa contracts. The standard deviation of 1.01 % was too high. The kiln needs to be slightly below the desired final moisture content for export orders.
Show more [+] Less [-]AGROVOC Keywords
Bibliographic information
This bibliographic record has been provided by Forestry Research Institute of Ghana