Influence of the hydraulic load on the wastewater treatment efficiency in the filters with different filter media
2010
Kazakeviciene, J., Lithuanian Univ. of Agriculture, Akademija, Kauno reg. (Lithuania) | Askinis, S., Lithuanian Univ. of Agriculture, Vilainiai, Kedainiai (Lithuania). Faculty of Water and Land Management. Water Research Inst.
In order to avoid the problem of stoppage in the filters of vertical filtration, we tried to search for the filter media which was coarse and could clean the wastewater to the allowable contamination level. For this purpose the dolomite chippings were chosen and the modelling investigation was performed. Two modelled filters taking 0.2 square m area each were equipped: one was filled with the sand and the other was filled with the dolomite chippings. The results revealed that the initial contamination of the wastewater had a much bigger influence on the wastewater cleaning process than the hydraulic load. The wastewater was cleaned with the efficiency of 95.9% and never exceeded the allowable level of 30 mg O2 LE-1 in the dolomite chippings filter during the trial with the hydraulic load 0.03 m**3 mE-2 dE-1. When the hydraulic load was doubled the efficiency of the wastewater cleaning process decreased to 80.5% and the dependence of the cleaning process on the initial contamination of the wastewater increased. In order to ensure the successful removal of the easily decomposing organic pollutants from the wastewater up to their allowable contamination level, the quantity of the pollutants in the untreated wastewater must not exceed 220 mg O2 LE-1.
Show more [+] Less [-]AGROVOC Keywords
Bibliographic information
This bibliographic record has been provided by Fundamental Library of Latvia University of Life Sciences and Technologies
