Chemical Reduction of Nitrate by Ferrous Iron
1976
Buresh, R. J. | Moraghan, J. T.
Knowledge concerning the chemical reduction of NO₃⁻ to gaseous products, a process of potential practical significance as an antipollution device, is sparse. The influence of pH on chemical reduction of NO₃⁻-N (approximate concentration 25 ppm) by Fe²⁺ in the presence and absence of Cu²⁺ was studied over a pH range from 6 to 10. After 24-hours of controlled pH incubations under a helium atmosphere NO₃⁻, NO₂⁻, N₂O, NO, N₂, and NH₄⁺ were determined. The initial Fe²⁺/NO₃⁻ mole ratio was 8. Reduction of NO₃⁻ was negligible in the absence of Cu²⁺, but was pronounced above pH 7 in the presence of approximately 5 ppm Cu²⁺. Formation of NH₄⁺ increased with pH and was the dominant process at pH 9 and 10. Nitrous oxide and N₂ accumulations were greatest in the pH range from 8 to 8.5 and negligible at pH 6 and 10. Nitrite formation was small except at pH 9 and 10. Trace quantities of NO accumulated during incubation if the pH was allowed to drop below 6. Levels of Cu²⁺ and Fe²⁺ influenced the extent and nature of NO₃⁻ reduction at pH 8. Maximum reduction of NO₃⁻ (93%) and maximum gas production (equivalent to 61% of the original NO₃⁻) occurred when the Fe²⁺/NO₃⁻ mole ratio was 12 and the Cu²⁺ level was approximately 10 ppm. The N₂O/N₂ mole ratio in the evolved gases decreased as the Cu²⁺ level was increased from approximately 1 to 10 ppm and as the Fe²⁺/NO₃⁻ mole ratio was increased from 8 to 12. Nitrate was relatively stable at a Cu²⁺ content of 0.1 ppm irrespective of the Fe²⁺/NO₃⁻ ratio.
Show more [+] Less [-]AGROVOC Keywords
Bibliographic information
This bibliographic record has been provided by National Agricultural Library