Evaporation of Distilled Water in a Fluidized Bed of Various Types of Fluidizing Particles Under Reduced Pressure
2014
An objective of this study is to continuously obtain dispersed, dry, fine powders from a dilute suspension of heat-sensitive materials at a low temperature and high drying rate. A fluidized bed under reduced pressure was used in this study and, as a first step, only distilled water (without solid powders) was used as a sample. Drying characteristics were examined for various types of fluidizing particles. The diameter of fluidizing particle varied for inert particles (glass beads). Three kinds of hygroscopic porous particles (silica gel beads; 3A, 4B, and 5D) were also used as fluidizing particles. Under reduced pressures, the maximum drying rate was found to be higher than that at atmospheric pressure, while the bed temperature became lower with an increase in the maximum drying rate (i.e., drying at lower temperature with a higher drying rate is possible under reduced pressures. As diameter of the fluidizing particle was increased, the maximum drying rate became higher, although the amount of gas required for fluidization also increased. The maximum drying rates for silica gel beads were found to be almost equal to those of glass beads, with the exception of 3A silica gel beads (having a smaller pore diameter). The bed temperature was lower for silica gel beads compared to glass beads at the same maximum drying rate (i.e., silica gel beads (hygroscopic porous particles) are superior to glass beads (inert particles) with regard to drying at low temperatures at a high drying rate).
Show more [+] Less [-]AGROVOC Keywords
Bibliographic information
This bibliographic record has been provided by National Agricultural Library