Continuous Treatment of Phenol over an Fe2O 3/γ-Al 2O 3 Catalyst in a Fixed-Bed Reactor
2015
Lu, Minghui | Yao, Yue | Gao, Lulu | Mo, Dongmei | Lin, Fang | Lü, Shuxiang
Fe₂O₃/γ-Al₂O₃catalysts were prepared using the wet impregnation method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nitrogen adsorption–desorption. The continuous catalytic wet hydrogen peroxide oxidation of an aqueous phenol solution over Fe₂O₃/γ-Al₂O₃was studied in a fixed-bed reactor. The effects of several factors, such as the weight hourly space velocity (WHSV), particle size, reaction temperature, H₂O₂concentration, and initial pH, were studied to optimize the operation conditions for phenol mineralization. For a 1 g L⁻¹phenolic aqueous solution, the phenol was nearly completely removed and chemical oxygen demand (COD) removal was approximately 92 % at steady-state conditions with a WHSV of 2.4 × 10⁻² gPₕOH h⁻¹ gcₐₜ⁻¹at 80 °C with 5.1 g L⁻¹H₂O₂. The long-term stability of the Fe₂O₃/γ-Al₂O₃catalyst was also investigated for the continuous treatment of phenolic water. The removal of phenol and COD exhibited a slowly decreasing trend, which was primarily due to the complexation of active sites with acid organic compounds and the adsorption of intermediate products. The deposition of organic carbon and Fe leached from the catalyst had a small role in the partial deactivation of the catalyst. The Fe leached from the catalyst partially contributed to the phenol removal during a short run. However, this contribution could be neglected after 36 h because the Fe leached from the catalyst decreased to approximately 5 mg L⁻¹.
Show more [+] Less [-]AGROVOC Keywords
Bibliographic information
This bibliographic record has been provided by National Agricultural Library
