Recycling 3D Printed Concrete Waste for Normal Strength Concrete Production
2024
Girum Mindaye Mengistu | Rita Nemes
As the use of 3D-printed concrete becomes more prevalent, the need for effective recycling methods becomes paramount. This study addresses this concern by exploring the repurposing of 3D-printed concrete waste as an aggregate in normal-strength concrete for C30/37 and C40/50 classes, covering both fine and coarse aggregates in its particle size distribution. The extent of recycled aggregate (RA) replacement was determined through sieve analysis. A two-stage investigation assessed the compressive strength performance of the concrete specimens. The initial stage produced reference specimens with no replacement, representing conventional concrete. In the second stage, variable specimens incorporated 50% and 67% recycled aggregate (RA) from 3D-printed concrete waste. Results revealed that in C40/50, both the 50% and 67% replacements consistently exhibited a higher strength than 0%. In C30/37, the 50% replacement displayed decreased strength compared to the 0% and 67%, while the 67% replacement consistently showed superior strength. Adjusting the water content impacted strength; at 67%, slight variations occurred, while at 50%, extra water led to a significant decrease. An overarching discovery is that the efficacy of the 67% replacement level holds regardless of the concrete strength class.
Show more [+] Less [-]AGROVOC Keywords
Bibliographic information
This bibliographic record has been provided by Directory of Open Access Journals
