Evaluation of an Electrocoagulation Process Modified by Fenton Reagent
2024
M. A. López-Ramírez, O. P. Castellanos-Onorio, F. Lango-Reynoso, M. del R. Castañeda-Chávez, J. Montoya-Mendoza, M. Díaz-González and B. Ortiz-Muñiz
This article is oriented to the degradation of nickel in an ionic state at laboratory level from synthetic water made with nickel sulfate, using the electrocoagulation process with aluminum cathodes and modifying this process by the addition of the Fenton reagent, which results from the combination of hydrogen peroxide (H2O2) and ferrous sulfate (FeSO4) being this reagent a catalyst and oxo-coagulant agent, The efficiency of this reagent will be compared with the typical treatment with aluminum sulfate, which is a typical process based on ion exchange/coagulation at the same percentage concentrations as the Fenton reagent. For this purpose, the optimum conditions of the advanced electrocoagulation process were determined, which consisted of determining the concentrations of Fenton’s reagent at concentrations of 150 ppm, 300 ppm, and 450 ppm, in addition to the operating variables such as pH of 8 and 10, voltage of 17.5 V and 19 V and their reaction time, which were compared with aluminum sulfate at 300 ppm, 600 ppm, and 900 ppm. The results obtained with respect to the typical treatment were 0% nickel degradation. However, with the advanced oxidation treatment, an average reduction of 97.5% was found at the conditions of 19 V, pH 10, and Fenton 150 ppm in a time of 30 min.
Show more [+] Less [-]Bibliographic information
This bibliographic record has been provided by Directory of Open Access Journals
