Infiltration and Failure Behavior of an Unsaturated Soil Slope under Artificial Rainfall Model Experiments

Slope disasters often include soil erosion and shallow landslides. These types of slope failure can occur in unsaturated soil. In this study, artificial rainfall is applied to a compacted soil slope in a laboratory to investigate the effects of rainfall intensity, initial moisture content and relative compaction on infiltration and failure behavior of an unsaturated soil slope subjected to rainfall infiltration. Soil moisture probes installed in the soil slope were used to monitor soil moisture content during the experiment. Test results show that the soil saturation at the toe of the slope was observed to be higher than other areas of the slope following the onset of rainfall. Gradually, the saturation advanced towards the crest, resulting in the formation of a wetting band along the slope surface. With increasing rainfall duration, the wetting band progressed further downwards along the slope. The failure of the slope began at the crest and junction of the slope, and the primary cause was soil erosion resulting from high-intensity rainfall. The most significant variable affecting infiltration behavior is relative compaction, followed by the initial moisture content of the compacted slope. During the experiment, the low hydraulic conductivity of the saturated soil caused most of the rainfall on the slope to become surface runoff, which minimized the impact of rainfall intensity on infiltration behavior. Specifically, the hydraulic conductivity of soil compacted at optimal moisture content and 90 R.C. is only 7.041 × 10^-5 cm/sec or 2.53 mm/h, which is much lower than rainfall intensities of 80 mm/h and 160 mm/h. In addition, soil saturation contours facilitated visualization and quantification of the infiltration behavior of slopes, enabling a more detailed analysis of experimental results. These results help understand the behavior of unsaturated soil slopes under artificial rainfall conditions and aid in designing effective slope stabilization measures to prevent slope failure and minimize the risk of landslides.