Effects of Grinding Corn with Different Moisture Content on Subsequent Particle Size and Flowability

The objective of this study was to determine the effects of whole-corn moisture and hammermill screen size on subsequent ground corn moisture, particle size and flowability. Treatments were arranged as a 2 × 2 factorial design with two moisture concentrations (14.5 and 16.7%), each ground using 2 hammermill screen sizes (3 mm and 6 mm). Corn was ground using a lab-scale 1.5 HP Bliss Hammermill at three separate timepoints to create three replications per treatment. Ground corn flowability was calculated using angle of repose (AOR), percent compressibility, and critical orifice diameter (COD) measurements to determine the composite flow index (CFI). There was no evidence for a screen size × corn moisture interaction for ground corn moisture content (MC), particle size, standard deviation, or flowability metrics. Grinding corn using a 3 mm screen resulted in decreased (p &lt: 0.041) moisture content compared to corn ground using the 6 mm screen. There was a decrease (p &lt: 0.031) in particle size from the 6 mm screen to the 3 mm, but no evidence of difference was observed for the standard deviation. There was a decrease (p &lt: 0.030) in percent compressibility as screen size increased from 3 mm to 6 mm. Angle of repose tended to decrease (p &lt: 0.056) when corn was ground using a 6 mm screen compared to a 3 mm screen. For the main effects of MC, 16.7% moisture corn had increased (p &lt: 0.001) ground corn MC compared to 14.5%. The 14.5% moisture corn resulted in decreased (p &lt: 0.050) particle size and an increased standard deviation compared to the 16.7% moisture corn. The increased MC of corn increased (p &lt: 0.038) CFI and tended to decrease (p &lt: 0.050) AOR and COD. In conclusion, decreasing hammermill screen size increased moisture loss by 0.55%, decreased corn particle size by 126 µm and resulted in poorer flowability as measured by percent compressibility and AOR. The higher moisture corn increased subsequent particle size by 89 µm and had improved flowability as measured by CFI.