Modeling of a Novel Cascade Cycle for the Simultaneous Production of Desalinated Water and Cooling Using Various Refrigerants
2025
Javier Delgado-Gonzaga | Wilfrido Rivera | José Camilo Jiménez-García | Alejandro Pacheco-Reyes | David Juárez-Romero
This study proposes a cogeneration system for the simultaneous production of cooling and freshwater. A double-stage cascade compression cooling system consists of two interconnected vapor compression cycles. The proposed system integrates a double-stage cascade compression cooling system with a water desalination unit, which takes advantage of the heat released by the cascade system. The system performance was evaluated using various refrigerants selected based on their energy efficiency, environmental impact, and widespread use. Multiple combinations of the fluids were used in the high-temperature cycle (HTC) and low-temperature cycle (LTC) to analyze their impact on system performance. A parametric analysis was conducted by developing a mathematical model in MATLAB. The model&rsquo:s input parameters were the evaporation temperature and the temperature difference between the inlet and discharge of both compressors (&Delta:LTC and &Delta:HTC). System performance was assessed from a first-law point of view through the coefficient of performance (COP), the energy utilization factor (EUF), and the gain output ratio (GOR). The results revealed that the maximum (105 °:C) and minimum (&minus:13 °:C) temperatures, essential for desalination and cooling, respectively, were achieved using R134a in the LTC and R123 in the HTC, with &Delta:LTC = 65 °:C and &Delta:HTC = 70 °:C. However, the best performance was observed with R123 in both cycles, with &Delta:LTC = 45 °:C and &Delta:HTC = 70 °:C. This configuration achieved a COP of 1.06, a GOR of 1.61, and an EUF of 2.74.
Show more [+] Less [-]AGROVOC Keywords
Bibliographic information
This bibliographic record has been provided by Multidisciplinary Digital Publishing Institute