Undernutrition is a confront to the health and output of the populace. It is viewed as one of the five leading contrary health impacts of climate variability and is defined as different measures of nutritional status. We aimed to assess the scientific evidence base for the impact of climate variability on childhood undernutrition (particularly wasting and underweight) in low- and middle-income countries. A systematic review was conducted to identify the peer-reviewed and gray full-text studies in English with no limits for the year of publication and study design. This review covers only published studies from four databases (PubMed, Scopus, Web of Science, and Science Direct). The risk of bias was assessed using the ROVBIS tool in individual studies. The PRISMA Statement checklist for systematic reviews was referred for this review process. A significant correlation between climate variables, temperature, rainfall, and drought, and at least one undernutrition parameter in 19 out of 22 studies was observed in this systematic review. In addition, we note that crop yield, maternal education, nutritional status of mothers, wealth status at the household level, and individual levels also play substantial roles in mediating the nutritional impacts. The findings of our analysis imply that exposure to climate variables may be linked to an increased risk of undernutrition both during and for several years following climate events. This may imply that undernutrition is never caused by temperature, precipitation, drought, or other weather-related factors alone but rather that undernutrition is triggered in children who are already at risk.

Judicious application of nitrogen (N) fertilizers in crop production is critical for reducing the nitrate pollution of groundwater and greenhouse gas emissions. It is, thus, important to improve the nitrogen use efficiency under the reduced application of nitrogen. A genotypic variation in N-uptake and N-use efficiency particularly under low N-input conditions exists across crops that can be deciphered and exploited for environmentally sustainable farming without any significant penalty of yield and quality. The present research conducted under the nutrient solution culture aimed to explore the inherent variability in the growth response of ten genetically diverse wheat varieties to low fertilizer N-application (N-, 10 μM N) in comparison to N sufficient control (N+, 8.5 mM N) viz., a viz., the activity of various key N-assimilating enzymes and to delineate the indirect effect of low N on uptake and partitioning of other major macronutrients viz., P, K, S, which may indirectly regulate the N-use efficiency. A notable increase in sulfur, potassium, and phosphorus content was observed under nitrogen-deficient conditions. Varieties such as Carnamah and HD 2824 exhibit a significant increase in shoot phosphorus content, emphasizing their potential to optimize phosphorus acquisition and utilization efficiency under nutrient-limited conditions. The findings highlight the complex interplay between nutrient availability and plant responses, showcasing varietal-specific adaptations to nitrogen limitations.

Polyaromatic Hydrocarbons (PAHs) in the environment have been linked to severe health effects. This study aims to assess the atmospheric pollutant and analyze the variation in PAHs, focussed on benzo[a]pyrene [B(a)P]. Among all PAHs, B(a)P is regarded as a marker for human carcinogenicity. This study reflects the B(a)P concentration and its correlation with the particulate matter (PM10 and PM2.5) in rural, peri-urban, and urban areas of Panvel Municipal Corporation, Maharashtra, India. Samples were collected during the pre & post-monsoon season for two consecutive years (Yr. 2020 and Yr. 2021). B(a)P level was determined using high-performance liquid chromatography coupled with a diode array detector. It was observed that PM2.5 and PM10 show a strong positive correlation (r=0.8-0.9) with B(a)P. It is observed that B(a)P concentrations were high in pre-monsoon w.r.t. post-monsoon, and this concentration increased spatially as we moved from rural to urban areas. Pre-monsoon B(a)P concentration varies somewhat by 5% between rural to urban areas as compared to post-monsoon. High levels of vehicular emissions and industry were associated with the distribution of B(a)P in urban areas, whereas a combination of local emissions and metropolitan area diffusion was responsible for the presence of B(a)P in peri-urban and rural areas. Also, this study captures the variation of B(a)P levels during the period of COVID-19. In future studies, Artificial Intelligence (AI) can augment the determination of PAHs in soil by improving the accuracy and speed of analysis using predictive modeling based on different input parameters to determine outliers in soil PAH data, building sensor networks for real-time monitoring of PAH levels, leverage robotics for automated sample preparations, and rapid testing of samples to identify hotspots.

Waters polluted with Pb and Cd have a negative impact on the environment. Padina australis grows abundantly on the coast of Palang Subdistrict, Tuban, and the local community consumes it. Macroalgae as food must be free of metal contamination. This study aims to determine the impact of Pb and Cd bioaccumulation on P. australis. Sampling was conducted at two stations, including Station I, Panyuran Village, and Station II, Glodog Village. Analysis of Pb and Cd metal levels using Atomic Absorption Spectrophotometry (AAS). Analysis of protein content using the Kjeldahl method. The data obtained was analyzed with Principle Component Analysis (PCA). The results of the analysis of Pb and Cd levels in P. australis at station II, which are 0.200 ± 0.028 and 0.021 ± 0.004 mg.kg-1 higher than station I, which are 0.194 ± 0.015 and 0.010 ± 0.001 mg.kg-1. The protein content of P. australis at station I was 4.713 ± 0.508 mg.kg-1, and at station II was 5.900 ± 0.928 mg.kg-1. This shows that P. australis is still considered good for consumption even though it has been polluted and contains Pb and Cd metals. P. australis can tolerate and does not experience severe physiological damage so it has the potential as a heavy metal phytoremediator.

The current investigation assessed the capability of a well-adapted and enriched bacterial strain known as Bacillus brevis for the biodegradation of phenanthrene. To enhance the removal efficiency of phenanthrene, employed Response Surface Methodology (RSM) in conjunction with a Box-Behnken design (BBD) model. The experiments were designed to explore the impact of pH (6.0 to 9.0), temperature (20 to 40°C), initial phenanthrene concentration (50 and 100 ppm), and incubation time (7 to 21 days) on biodegradation of phenanthrene. The highest level of phenanthrene biodegradation, approximately 55.0%, was achieved by Bacillus brevis when the optimal conditions were met as pH of 7.0, temperature 30oC, and initial phenanthrene concentration (70 ppm) after 21 days of incubation time. This study underscores the significance of employing statistical tools like RSM to enhance the microbial degradation of contaminants.

There is a pressing demand for the introduction of environmentally safe technologies for the industries that supply the basic needs of industrialized societies. Advanced Oxidation Processes may become one of the answers to these uprising pollution management problems in the near future. The present investigation aimed to reduce the refractory organics present in the biologically treated (Activated Sludge Process) tannery effluent using Photocatalysis. The optimum time, pH, dosage of H2O2, and mass of NPAC required for the effective treatment using photocatalysis were found to be 60 mins, 8, 0.2 mg.L-1, and 1g. 100 mL-1, respectively. Although the efficiency of homogeneous photocatalysis was found to be higher than that of heterogeneous photocatalysis, the biodegradability was higher in the latter, with a value of 0.26. The experimental results have proved that photocatalysis could be a promising technology to reduce the refractory organics present in the tannery effluent.

Anthropogenic environmental pollution is a major development challenge in Ugandan rivers and lakes, the key drivers being industrialization, agriculture, and urbanization. The aim of the study was to assess the potential of heavy metal and microplastic contamination in River Mpanga, Fort Portal, Uganda. Triplicate water and sediment samples were collected from three sampling sites, preserved, and analyzed at the Chemistry Department, Makerere University for heavy metals, while microplastics analysis was conducted at NaFIRRI, Jinja. Sediment heavy metal contamination was assessed from the geoaccumulation index, while microplastic characterization and quantification were determined from stereomicroscopy and morphological features. Arsenic was the most prevalent metal with a mean concentration of 13.2 ppm thus higher than permissible maximum limits of WHO. The mean concentrations (ppm) of copper, lead, and cadmium were 0.01, 0.01, and 0.001 respectively, and below the permissible maximum. Sediment samples revealed very strong arsenic contamination, strong contamination for copper, moderate to strong contamination for lead, and a potential lack of contamination for cadmium. The higher concentrations of the heavy metals in the sediments compared to water could be attributed to bioaccumulation, as evidenced by the high geoaccumulation values. Microplastics occurred throughout the river and included fragments, filaments, film, pellets, form, and fibers. The presence of heavy metals and microplastics was attributed to anthropogenic activities within the river vicinity, which discharged heavy metal-laden waste into River Mpanga. High arsenic concentrations and sediment accumulation of contaminants pose serious potential public health threats to the local communities.

Isotopes are atoms of an element having the same atomic number but different mass numbers. Isotopes in hydrology and water resources are used for identifying its occurrence, movement, residence times, recharge, and discharge process. Stable isotopes of hydrogen(δ2H) and oxygen(δ2O) are used for identifying the surface and groundwater interactions as they constitute hydrogen and oxygen. In this study oxygen and hydrogen stable isotopes are used to identify surface and groundwater interaction in Old Mahabalipuram Road (OMR) regions of Chengalpattu district. The precipitation, lake, surface, and groundwater were collected during pre-monsoon, monsoon, and post-monsoon seasons. The collected sample is analyzed for stable isotopic compositions of oxygen and hydrogen seasonal-wise. The measured stable isotopic compositions during pre-monsoon season of stable oxygen are -4.29 to -2.00 and stable hydrogen are -29.39 to -24.67. The isotopic compositions during monsoon season range from -4.72 to -4.00 and for hydrogen ranges from -29.39 to -23.50. During monsoon season the depletion of isotopic composition is seen and the enrichment of isotopic composition is observed during pre-monsoon season. The variation in stable isotopic composition of oxygen and hydrogen are observed. A Groundwater Water Meteoric Water Line (GMWL) is developed for the study area, and it is compared with a Local Meteoric Water Line (LMWL) for better interpretation of the results. A slight deviation is observed from that of GMWL to LMWL mostly due to isotopic depletion and evaporation effects. From the analysis, a good correlation exists between precipitation and surface water in the study area indicating about recharge mechanism existing in the study area. The groundwater recharge is observed during monsoon seasons and discharge is more towards the pre-monsoon seasons.

Plastic waste in marine waters will undergo a degradation process that breaks down large plastic pieces into smaller particles called microplastics. The abundance of microplastics, caused by their small size (<5mm) can be easily indirectly consumed by aquatic animals. Anadara granosa is one of the bivalves that is quite vulnerable to microplastic contamination because it has the nature of a filter feeder which means it can sift particles and organic matter around it. The purpose of this study was to determine the characteristics, abundance, and types of microplastic polymers in blood clams (A. granosa). The results of microplastic observations made on 60 blood clams were 153 microplastic particles identified from 47 individuals (78%) of contaminated blood clams with an average microplastic abundance of 0.591 ± 0.083 item/gr. Fiber-type microplastics are the most dominant form found and blue is the most dominant color found in the sample. Based on the average abundance of microplastics in Anadara granosa in the coastal area of Palopo City, it is lower than several studies that have been conducted previously. Fourier Transform-Infra Red was conducted to determine the type of polymer in microplastics. Three types of polymers were found in the Anadara granosa samples polyethylene terephthalate (PET), polystyrene, and polyester. The three types of polymers have effects on human health such as respiratory problems, skin irritation, and genotoxicity. Action is needed to prevent microplastic pollution in Palopo City’s rivers before microplastic pollution becomes more severe in the future.

"Due to enormous quantities with hazards and complexity in nature is a big challenge for effective treatment of wastewater from pharmaceutical processes including herbal extraction through conventional methods of distillation. The situation is further aggravated in countries facing high rising population, urbanization, and industrialization resulting in the generation of industrial wastes. The study has been carried out in the herbal extraction industry by conducting stage-wise sampling of ETP based on the conventional method and further coupled with ozonation as an advanced treatment to comply with regulatory standards. Additionally, the same process was studied that implementing the best available technology (BAT) by providing ETP with advanced technology modules such as MBR (membrane bioreactor) + RO + O3 has not only resulted in compliance with standards but also reuse of treated wastewater into the process and utilities has been proved to be techno-economically a viable and sustainable option. Modifying existing aeration tanks and advanced oxidation through ozone injection post-biological treatment has resulted in COD and BOD reduction of 96.42% and 99.0% respectively. Whereas in the case of MBR + RO + O3, the values of pH, BOD, COD, TSS, and sulfide have been observed as 8.32, 2.0 mg.L-1, 14.0 mg.L-1, 1.0 mg.L-1 and 0.0 mg.L-1 respectively and 98% recovery of treated effluent, thus saving 44 KL.day-1 of freshwater resulting into significant financial benefits of Rupees 12.59 acs annually, which otherwise was outsourced through tankers."