Air is an important medium for all living beings and is essential for the well-being of all. Monitoring of air is important to know the quality of air. The air quality monitoring was carried out in Kolhapur City under the National Air Monitoring Program. The present study involves the assessment of PM10 as described in the National Ambient Air Quality Standards (NAAQS). The source apportionment study related to particulate matter was carried out in Kolhapur City. The study also determined the average PM10 concentration in the city as it will be useful for preparing an action plan to reduce PM10 concentration. PM10 concentration was calculated as per the standard method adopted by CPCB. Sampling was carried out for 8 hours in three shifts twice a week at each sampling site for three consecutive years. Mahadwar Road (MR) and Dabholkar Corner (DC) were selected per the surrounding residential area, population density, and traffic conjunction. The third site Shivaji University (SUK), was selected as a control site. The results indicated that the PM10 level has risen above the prescribed standards of NAAQS. The reason for the rise in PM10 may be due to fossil fuel burning, construction activity, vehicles, and unpaved roads. The Analysis of Variance (ANOVA) technique is used to check the equality of the mean concentration of PM10 at these three locations and found a significant difference between mean concentrations of PM10, suggesting increased particulate matter.

The semiconductor industry produces a lot of wastewater. These wastewaters can affect the environment if they are not treated. As a result, one of the semiconductor industry’s primary concerns and duties is the treatment and disposal of wastewater from the industry. Many processes, including electrocoagulation, electro-adsorption, and coagulation-flocculation using both natural and synthetic coagulants, have been invented over the years for purifying semiconductor effluent. The long-term viability of this system is unknown although it generates solid by-products (sludge) and requires routine sludge disposal, both of which raise the operational expenses of effluent treatment. Thus, a sustainable alternative method of removing contaminants from the semiconductor industry is needed to advance toward pollution prevention and green innovation. The hydrodynamic cavitation technique has improved over time and is useful for treating water and wastewater. This article gives an insight into different wastewater technologies, so proper technology must be chosen.

Short-lived climate pollutants (SLCPs) have significant effects on climate, human health, and the environment. In Morocco, steps are being taken to reduce SLCP emissions, but effective policymaking requires a thorough understanding of emission sources and trends. In this paper, we present a study on the production of a database on SLCP emissions in Morocco, as well as the development of scenarios to project these emissions using LEAP software. The results of this analysis allow us to better understand the emissions sources and evaluate the impact of different emission reduction policies.

It is extremely difficult to clean up accidental oil spills in water since conventional oil sorbents absorb much more water in addition to the oil. Alternatively, cleanup techniques might lead to secondary contamination. This study examines and measures the oil absorption capacities of two hydrophobic natural fibers: water hyacinth (Eichhornia crassipes) and lotus (Nelumbo nucifera). At the laboratory scale, the absorption of engine oil, vegetable oil, and diesel oils onto various dry biomass materials, including water hyacinth and lotus with different particle sizes (BSS-44, BSS-60, BSS-100, BSS-120, BSS-160, and BSS-200), was investigated. Water hyacinth shows a higher absorption efficiency for all samples as compared to the lotus.

Climate change crises and environmental imbalances have been a significant concern globally in recent times. The climatic changes give rise to various issues such as global warming, depletion of the ozone layer, deterioration of natural resources, soil erosion, deforestation, and more. Many international and national agreements and policies have been created to protect the environment, from the UNFCCC to the recent Paris Agreement, aiming to control rising environmental issues. However, developed and developing countries must achieve desirable results in combating climate change. Industrial and technological developments are critical reasons for environmental pollution and degradation. Progress is necessary for planned developing countries, but growth and expansions shall also consider ecological sustainability. Technology shall be novel in adapting to the changes, considering the effects it can produce on the environment. Green technology combines technology with the environment, also called environmental technology, clean technology, or sustainable technology. It is a combination of science and technology together to mitigate climatic changes and protect the environment. Green technology is the modern sustainable solution to pressing environmental concerns. India is one of the countries globally showing rapid green technology developments. The authors of this paper have tried to highlight the dire need to modify technological developments vis-a-vis environmental sustainability to protect the environment. The research paper delves into and understands the interface between clean technology’s importance and relevance for ecological sustainability and the role of patent law, particularly in dealing with issues of the environment. The paper shall also establish a harmonious relationship between patent law and its role in ensuring environmental sustainability.

This study aims to analyze the association between the share of agriculture in GDP and changes in climatic variables, notably per capita CO2 emissions and temperature change, using time series data of India, Bangladesh, and Nepal for the period 1961-2018. The ARDL bounds testing method was applied to analyze the relationships among the research variables for both short-term and long-term. The results revealed that in the long run, per capita CO2 emissions and temperature change have no statistically significant relationship with India and Nepal’s share of agriculture in GDP. However, temperature change has demonstrated a positive and statistically significant relationship with the share of agriculture in Bangladesh’s GDP. Temperature change has a significant and adverse impact on the share of agriculture in India’s GDP in the short run, whereas CO2 has no significant effect. In the short run, CO2 shows a positive and significant connection with the share of agriculture in Bangladesh’s GDP. Still, temperature change is negatively and significantly associated with the proportion of agriculture in the nation’s GDP. Different lag values of both CO2 and temperature change have significant relationships with the share of GDP in agriculture in the short run in Nepal. As agriculture is a key source of GDP for all three countries, it is vital to implement suitable policies and make plans and strategies to mitigate climate change’s harmful consequences in agriculture.

Fluorides are emitted in both gaseous and particle forms in the industrial sector. However, studies usually only report total fluoride content. Therefore, the study aimed to assess the particulate, gaseous fluoride and correlate it with the respirable dust particles in Single Super Phosphate (SSP), Granular Single Super Phosphate (GSSP), and administration divisions of the industry. Respirable dust particles, particulate fluoride, and hydrogen fluoride in the work environment were collected on a filter cassette containing an MCE filter paper (0.8 micron 37-mm) and Na2CO3 impregnated backup pad, respectively, using a personal sampler. The fluoride samples were analyzed using Ion Selective Electrode (ISE) and expressed as milligrams per meter cube (mg.m-3). The respirable dust, particulate, and gaseous fluoride content were found to have statistically significant differences (p<0.001) between the divisions (SSP, GSSP, and administration) in the static monitoring, whereas, in the case of personal monitoring, no significant differences were observed. Average airborne respirable, particulate, and gaseous fluoride levels in static monitoring were 1.37, 1.03, 0.20 mg.m-3, 0.018, 0.008, 0.001 mg.m-3, and 0.808, 0.403, 0.026 ppm in SSP, GSSP and administration respectively, whereas in personal monitoring the average respirable, particulate and gaseous fluoride concentrations were 1.18, 0.85, 0.30 mg.m-3, 0.0013, 0.007, 0.002 mg.m-3 and 0.356, 0.258, 0.011 ppm in SSP, GSSP and administration respectively. The present study observed that the levels of fluoride decreased with an increase in distance from SSP, followed by GSSP and administration. It indicates that the fluoride exposure was inversely proportional to the distance of the source. This study outcome will help to design a policy and intervention to mitigate fluoride exposure among workers.

In this paper, greywater samples are collected from the kitchens of different types of buildings (residential and commercial) located in different districts within the city of Jeddah, Saudi Arabia. The collected samples are analyzed and compared with the potable water from the same region. The parameters investigated are pH, conductivity, total solids (TS), total dissolved solids (TDS), total suspended solids (TSS), total hardness, temporary hardness, permanent hardness, alkalinity, chloride, and biochemical oxygen demand (BOD). It was found that the amount of total suspended solids is very high in the greywater samples. It shows the presence of both temporary and permanent hardness. Their alkalinity values are greater than hardness. It may be due to the number, lifestyle, age of the occupants, presence of children, and social and cultural behavior of residents. The concentration of BOD level is very low, which shows that the greywater samples have lower concentrations of organic compounds. Design details of the greywater treatment plant are suggested based on the results of the analysis. This includes a screening chamber, grit chamber, settling tank, and filtration unit. The treated greywater is recommended for reuse for gardening, landscaping, and toilet flushing purposes.

Despite the relatively small amounts produced, medical waste is a significant issue for the government and the healthcare industry primarily because it poses threats to persons and the environment. Healthcare wastes pose threats to the environment and public health, but knowledge of these concerns and how they relate to management techniques is still lacking. Evaluating waste management practices and healthcare staff expertise is critical to identify shortcomings and lower risk levels. The study was conducted at three selected private hospitals. These three hospitals contain 462 beds, all together with 184 healthcare workers. The study was designed as a descriptive cross-sectional study, and three private healthcare institutions in the study region were evaluated. These 100 healthcare workers were chosen by purposive sampling. The hospitals under consideration include general surgical, Gynecological, pediatric, and various specialty treatments. Data was gathered for the study utilizing a quantitative questionnaire, which includes closed-ended structured questionnaires. The results showed that most healthcare workers practice waste segregation at source. Chemical cross-linking was very poor. However, waste shredding technology is being used substantially. Risk perception among Healthcare workers regarding polymer help waste management showed more of average to high risk. The study concluded that despite the existence of policies and plans, execution is still subpar at private healthcare institutions. The creation of guidelines for hospital waste management, their distribution to other institutions, and their encouragement to do a critical self-evaluation should all be required by the government.

Safe water and food are essential for good human health. The contamination of water with infected fecal bacteria is common in areas with poor standards of hygiene and sanitation. This study investigated total coliform bacteria, fecal coliform bacteria, and E.coli in drinking water and food stalls using water from a rural community, where the rural living conditions increase the risk of water-related diseases. In total, 40 samples of bottled drinking water, 50 water samples from vending machines, 30 samples of household drinking water, 30 food samples were collected from household food, and 60 food samples were collected from food stalls, and coliform bacteria contamination was determined using the most probable number (MPN) technique. The results revealed that all the water and food samples contained coliform bacteria contamination, while all the water samples and 50% of the food samples contained fecal coliform bacteria. The numbers of household food samples contaminated with coliform bacteria and E.coli were 29 (97%) and 12 (40%), respectively. Entrepreneurs should be regularly maintaining clean drinking water vending machines. The government sector should be urgently solving the problem of drinking water standards to ensure suitable consumer safety.