Purpose. To investigate the varietal characteristics of the hemp plants for improving the quality indices of the soil they grow in, determine the amount of inorganic elements in the soil, level of their accumulation in plant stalkі and seeds. Methods. Field and spectrometric methods were basic. The results were processed using conventional methods in agriculture, crop growing and statistics. Variants of the experiment were as follows: varieties ‘Hliana’, ‘Hlesiia’: 1) soils; 2) stalks; 3) seeds. Schemes of experiments included: a) technical maturity of plants, row spacing 45 cm; b) tech­nical maturity of plants, row spacing 15 cm; c) biological maturity of plants, row spacing 45 cm; d) biological maturity of plants, row spacing 15 cm. Results. The amount of the accumulation of alkaline earth metals and their compounds by seeds and stalks of hemp plants depending on their content in vegetation soils was determined. It was found that stalks of the ‘Hlesiia’ plant accumulated strontium (Sr) and its compounds far less than that of ‘Hliana’, whereas in the seeds of the ‘Hlesiia’ variety the content of this chemical element was higher comparing with the previous variety by 70 and 78%, respectively. The difference in the accumulation of barium (Ba) compounds in seeds of hemp plants was not significant, while the tissues of the plant stalks of the ‘Hlia­na’ variety accumulated its compounds significantly more as compared to the ‘Hlesiia’ variety. The degree of influence of the variety, feeding area and the maturity stage on the processes of magnesium compounds (Mg) accumulation by plants was not revealed. Plants of the ‘Hlesiia’ variety accumulated far less calcium (Ca) and its compounds in the stalk tissues as compared to the plants of the ‘Hliana’ variety: in variants of the technical maturity stage of plants with row spacing 45 cm (a) and d – plants of narrow-row sowing (15 cm) in the biological maturity stage 30,94 and 15,95 mg/kg more in the presence in soil and in variants of the technical maturity stage of plants of narrow-row sowing (15 cm) and in the biological maturity stage with broad-sowing (45 cm) 34.54 and 24.19 mg/kg less in the presence in soil. Conclusions. The indices of accumulation of alkaline earth metals by hemp plants were significantly affected by the concentration of compounds of a certain chemical element in the arable layer, the level of energy (light) obtained by plants during vegetation, the varietal features of hemp, the stages of organogenesis of hemp plants and the specificity of their aboveground parts – stalks to accumulate these chemical elements as well as cumulate them by seeds. The varietal dependence as for accumulation of heavy metals by hemp plants tissues and seeds was established. In order to obtain environmentally friendly products, it is necessary to take into account the varietal features of plants concerning the ability to absorb and accumulate the relevant chemical elements and their compounds in the process of hemp culti­vation.

Purpose. To study the influence of fractional composition of seed material on productive properties of spring rape seeds of the ‘Magnat’ variety and ‘MVM’ (‘Gladiator’) variety sample. Methods. Field investigations, laboratory tests, statistical analysis. Results. During 2013–2014, the influence of sown seeds of different size fractions (up to 2,5 g; 2,6–3,5 g; 3,6 g and more) on the indices of productivity of spring rape varie­ties was studied. It was found that over the years of study field germination of sown fractions of seeds in ‘Magnat’ variety averaged 83.5%, in ‘MSM’ variety sample – 86.7%. During the periods of seedling emergence and harvesting, the density of spring rape crops varied depending on relevant fraction of sown seeds. In the ‘Magnat’ variety, photosynthetic potential of crops ranged from 1.1 to 1.3 million m2/ha, in ‘MSM’ variety sample – from 1.2 to 1.6 million m2/ha. Depending on the seed fractions applied, ‘Magnat’ variety crops during the gro­wing season accumulated organic biomass from 2.05 to 2.36 g/m2 per day, ‘MSM’ sample variety – from 1.83 to 2.10 g/m2 per day. Conclusions. It was established that different fractions of spring rape seeds sown in the Northern Forest-Steppe zone of Ukraine affected the indices of germinating energy and laboratory germination, crop density formation, leaf surface area and intensity of photosynthesis process (crop photosynthetic potential, net photosynthesis performance). The highest indices of productivity and yield in the ‘Magnat’ variety was ensured by large-seeded fraction (3,6 g and more), in the ‘MVM’ (‘Gladia­tor’) sample variety – by small-seeded fraction (up to 2,5 g).

Purpose. This study was aimed to determine some biochemical parameters and productivity of the gene fund of Silphium L. genus in the M. M. Gryshko National Botanical Garden of the NAS of Ukraine. Methods. Plant raw material investigated at the flowering stage (17 genotypes) and the end of vegetation (20 genotypes) of Silphium spp. 3 species and 4 cultivars studied for the content of nutrients at the flowering. Determination of dry matter, ash, calcium, nitrogenfree extractives conducted according to Hrytsaienko et al. (2003), phosphorus, protein – according to Pochinok (1976), sugars – according to Krishchenko (1983), cellulose – according to Zheng et al. (2018), lipids – according to Zamowski, Suzuki (2004). It was used productivity parameters: yield of above-ground mass, the yield of dry mass, energetic value, yield of energy. Data analyzed statistically. Results. Investigation of nutrients content showed that content of dry matter was in the range of 18.90–29.3%, protein – in the range of 8.88–23.56%, cellulose – 15.10–36.14%, ash – 8.13–12.19%, lipids – 1.83–3.97%; yield of above-ground mass – 45.0–139.0 t/ha, the yield of dry matter – 10.31–36.92 t/ha, energy value – 3933–4249 cal/g, and yield of energy – 43.81–149.27 Gcal/ha. A study of genotypes at the flowering and end of vegetation identified that the content of dry matter for all samples was in a range of 18.38–67.49%, sugars – 2.78–19.0%, ash – 3.93–11.20%, calcium – 1.68–5.99%, phosphorus – 0.14–1.21%, energy value – 3153.36– 3770.28 cal/g. Conclusions. Plant raw material of genotypes of Silphium L. spp. is a valuable source of nutrients. The content of ash, its components, energetic value, and parameters of productivity depending on genotype and stage of growth. The results allow recommending selected Silphium genotypes as perspective energetic crops in Ukraine as well as other countries.

The creative and organizational role of academician M. M. Hryshko was analyzed in studying the gene pool of plants in Ukraine and creating collection funds of the National Botanical Garden of the National Academy of Sciences of Ukraine, which has been named after this famous scientist since 1991. Investigations on introduction, acclimatization and breeding of plants were described embracing the period from post-war years to the present day. Information was gi­ven that concerns the results of the introduction and plant breeding in the early 1950s as reported by M. M. Hryshko and recent data on species and varietal diversity of cultivated ornamental, fruit, subtropical, agricultural (including energy, feed, vegetable, spice aroma, aromatic, technical, green manure, nectariferous) plants.

Purpose. Determine a number of morphometric and biochemical parameters of various genotypes of Bunias orientalis L. in the M. M. Gryshko National Botanical Garden of the NAS of Ukraine (NBG). Methods. Plant samples of B. orientalis (6 genotypes created in the NBG) were examined during the flowering stage. Determination of dry matter, ash, calcium was carried out according to Hrytsaienko et al. (2003), phosphorus according to Pochinok (1976), sugars, ascorbic acid and lipids were determined according to Krishchenko (1983), b-carotene according to Pleshkov (1985). The energy value of plants was determined using an IKA C-200 calorimeter. The obtained results were analysed statistically. Results. The height of plants varied from 140.9 (Genotype 1) to 157.5 (Genotype 5) cm, stem diameter from 11.67 (Genotype 1) to 16.1 (Genotype 6) mm, the number of internodes from 18.7 (Genotype 1) to 25.7 (Genotype 6), the number of leaves on a stem from 14.11 (Genotype 1) to 21.8 (Genotype 5), leaf lamina length from 14.2 (Genotype 1) to 23.45 (Genotype 6) cm, leaf lamina width from 6.34 (Genotype 1) to 14.5 (Genotype 4) cm, inflorescence length from 27.4 (Genotype 1) to 45.4 (Genotype 3) cm, inflorescence width from 2.32 (Genotype 1) to 4.92 (Genotype 3) cm, and the number of stems from 2.55 (Genotype 2) to 5.33 (Genotype 1). The study of the content of structural and functional compounds and nutrients at the flowering stage showed that the dry matter content was in the range of 13.58–16.00%, sugars 5.07–8.86%, titratable acidity 3.28–4.25%, lipids 3.33–6.61%, ascorbic acid 382.83–693.82 mg%, b-carotene 0.94–3.48 mg%, ash 6.79–9.2%, calcium 1.00–2.44%, phosphorus 1.61–2.67% and energy value 3337.0–3498.0 cal/g. Conclusions. It was revealed that samples of various genotypes of B. orientalis are a valuable source of nutrients at the flowering stage. The biochemical composition of plants depended on the genotype and stage of growth. Results of the morphometric study showed variability of investigated parameters. The obtained data can be used to predict and evaluate the results of introduction and breeding studies with B. orientalis genotypes as promising crops in Ukraine.

Purpose. To develop an algorithm of creation of new highly productive clonal varieties of Salicaceae family representatives with improved agronomic characters that can be used at energy plantations Methods. Field investigations, laboratory analysis, analytical approach, selection method. Results. Flow chart of selection process with representatives of Salicaceae family included the following stages: the Ist stage – creation of primary families (F0); the IInd stage – creation of the second families, or branches; the 222rd stage – interfamily (individually-familial) selection; IVth stage – familial-group selection; the Vth stage – clonal selection (selection of ramets). Conclusions. Breeding process with the use of complex of advanced methods of selection (individual, familial, group and clonal ones) allows to get model populations with high-frequency of valuable alleles and genotypes and with the high level of genetic variety. Due to a negative multi-stage individual intrafamilial and interfamily selection, cleaning of artificial populations from undesirable forms takes place without the substantial decrease of genetic variety level.

The results of studies on the major agronomic traits of the best com hybrids of different maturity groups on their suitability to grow in south-western part of the forest- steppe. Use in production practice the proper Selection of hybrids of maize provides an opportunity not only to predict the volume of its production, but also significantly save energy at the post-harvest handling of grains of this crop.